linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>
Subject: [PATCH 1/4] arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
Date: Wed, 12 May 2021 20:42:06 +0530	[thread overview]
Message-ID: <20210512151209.27560-2-kishon@ti.com> (raw)
In-Reply-To: <20210512151209.27560-1-kishon@ti.com>

Rename the external refclk inputs to the SERDES from
dummy_cmn_refclk/dummy_cmn_refclk1 to cmn_refclk/cmn_refclk1
respectively. Also move the external refclk DT nodes outside the
cbass_main DT node. Since in j721e common processor board, only the
cmn_refclk1 is connected to 100MHz clock, fix the clock frequency.

Fixes: afd094ebe69f ("arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../dts/ti/k3-j721e-common-proc-board.dts     |  4 ++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 58 ++++++++++---------
 2 files changed, 34 insertions(+), 28 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 60764366e22b..86f7ab511ee8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -635,6 +635,10 @@
 	status = "disabled";
 };
 
+&cmn_refclk1 {
+	clock-frequency = <100000000>;
+};
+
 &serdes0 {
 	serdes0_pcie_link: link@0 {
 		reg = <0>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index c2aa45a3ac79..002a0c1520ee 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -8,6 +8,20 @@
 #include <dt-bindings/mux/mux.h>
 #include <dt-bindings/mux/ti-serdes.h>
 
+/ {
+	cmn_refclk: cmn-refclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	cmn_refclk1: cmn-refclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+
 &cbass_main {
 	msmc_ram: sram@70000000 {
 		compatible = "mmio-sram";
@@ -336,24 +350,12 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	dummy_cmn_refclk: dummy-cmn-refclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
-	dummy_cmn_refclk1: dummy-cmn-refclk1 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
 	serdes_wiz0: wiz@5000000 {
 		compatible = "ti,j721e-wiz-16g";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+		clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&cmn_refclk>;
 		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
 		assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
 		assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
@@ -362,21 +364,21 @@
 		ranges = <0x5000000 0x0 0x5000000 0x10000>;
 
 		wiz0_pll0_refclk: pll0-refclk {
-			clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+			clocks = <&k3_clks 292 11>, <&cmn_refclk>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz0_pll0_refclk>;
 			assigned-clock-parents = <&k3_clks 292 11>;
 		};
 
 		wiz0_pll1_refclk: pll1-refclk {
-			clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>;
+			clocks = <&k3_clks 292 0>, <&cmn_refclk1>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz0_pll1_refclk>;
 			assigned-clock-parents = <&k3_clks 292 0>;
 		};
 
 		wiz0_refclk_dig: refclk-dig {
-			clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&cmn_refclk>, <&cmn_refclk1>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz0_refclk_dig>;
 			assigned-clock-parents = <&k3_clks 292 11>;
@@ -410,7 +412,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+		clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&cmn_refclk>;
 		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
 		assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>;
 		assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>;
@@ -419,21 +421,21 @@
 		ranges = <0x5010000 0x0 0x5010000 0x10000>;
 
 		wiz1_pll0_refclk: pll0-refclk {
-			clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+			clocks = <&k3_clks 293 13>, <&cmn_refclk>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz1_pll0_refclk>;
 			assigned-clock-parents = <&k3_clks 293 13>;
 		};
 
 		wiz1_pll1_refclk: pll1-refclk {
-			clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+			clocks = <&k3_clks 293 0>, <&cmn_refclk1>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz1_pll1_refclk>;
 			assigned-clock-parents = <&k3_clks 293 0>;
 		};
 
 		wiz1_refclk_dig: refclk-dig {
-			clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&cmn_refclk>, <&cmn_refclk1>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz1_refclk_dig>;
 			assigned-clock-parents = <&k3_clks 293 13>;
@@ -467,7 +469,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+		clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&cmn_refclk>;
 		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
 		assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>;
 		assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>;
@@ -476,21 +478,21 @@
 		ranges = <0x5020000 0x0 0x5020000 0x10000>;
 
 		wiz2_pll0_refclk: pll0-refclk {
-			clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+			clocks = <&k3_clks 294 11>, <&cmn_refclk>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz2_pll0_refclk>;
 			assigned-clock-parents = <&k3_clks 294 11>;
 		};
 
 		wiz2_pll1_refclk: pll1-refclk {
-			clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>;
+			clocks = <&k3_clks 294 0>, <&cmn_refclk1>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz2_pll1_refclk>;
 			assigned-clock-parents = <&k3_clks 294 0>;
 		};
 
 		wiz2_refclk_dig: refclk-dig {
-			clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&cmn_refclk>, <&cmn_refclk1>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz2_refclk_dig>;
 			assigned-clock-parents = <&k3_clks 294 11>;
@@ -524,7 +526,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+		clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&cmn_refclk>;
 		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
 		assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>;
 		assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>;
@@ -533,21 +535,21 @@
 		ranges = <0x5030000 0x0 0x5030000 0x10000>;
 
 		wiz3_pll0_refclk: pll0-refclk {
-			clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+			clocks = <&k3_clks 295 9>, <&cmn_refclk>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz3_pll0_refclk>;
 			assigned-clock-parents = <&k3_clks 295 9>;
 		};
 
 		wiz3_pll1_refclk: pll1-refclk {
-			clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>;
+			clocks = <&k3_clks 295 0>, <&cmn_refclk1>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz3_pll1_refclk>;
 			assigned-clock-parents = <&k3_clks 295 0>;
 		};
 
 		wiz3_refclk_dig: refclk-dig {
-			clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&cmn_refclk>, <&cmn_refclk1>;
 			#clock-cells = <0>;
 			assigned-clocks = <&wiz3_refclk_dig>;
 			assigned-clock-parents = <&k3_clks 295 9>;
-- 
2.17.1


  reply	other threads:[~2021-05-12 15:27 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-12 15:12 [PATCH 0/4] J721E: Use external clock in EVM for SERDES Kishon Vijay Abraham I
2021-05-12 15:12 ` Kishon Vijay Abraham I [this message]
2021-05-12 18:51   ` [PATCH 1/4] arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES Nishanth Menon
2021-05-13 12:11     ` Kishon Vijay Abraham I
2021-05-13 14:01       ` Nishanth Menon
2021-05-17  8:30         ` Kishon Vijay Abraham I
2021-05-17 14:05           ` Nishanth Menon
2021-05-20 13:18             ` Kishon Vijay Abraham I
2021-05-20 13:41               ` Nishanth Menon
2021-05-12 15:12 ` [PATCH 2/4] arm64: dts: ti: k3-j721e-main: Add #clock-cells property to serdes DT node Kishon Vijay Abraham I
2021-05-12 15:12 ` [PATCH 3/4] arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for SERDES Kishon Vijay Abraham I
2021-05-12 15:12 ` [PATCH 4/4] arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as "phy" Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210512151209.27560-2-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).