From: Alexandru Ardelean <aardelean@deviqon.com>
To: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: jic23@kernel.org, Jonathan.Cameron@huawei.com,
alexandru.tachici@analog.com, linux@deviqon.com,
Alexandru Ardelean <aardelean@deviqon.com>
Subject: [PATCH v3 04/12] iio: adc: ad7192: handle zero Avdd regulator value
Date: Wed, 12 May 2021 20:49:06 +0300 [thread overview]
Message-ID: <20210512174914.10549-5-aardelean@deviqon.com> (raw)
In-Reply-To: <20210512174914.10549-1-aardelean@deviqon.com>
This change fixes a corner-case, where for a zero regulator value, the
driver would exit early, initializing the driver only partially.
The driver would be in an unknown state.
If the regulator value is zero, then the internal reference will be zero
(though that value will be zero for anything less than 1 millivolt).
Fixes: ab0afa65bbc7 ("staging: iio: adc: ad7192: fail probe on get_voltage")
Cc: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
drivers/iio/adc/ad7192.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index d3be67aa0522..9da394ad3868 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -951,7 +951,7 @@ static int ad7192_probe(struct spi_device *spi)
voltage_uv = regulator_get_voltage(st->avdd);
- if (voltage_uv > 0) {
+ if (voltage_uv >= 0) {
st->int_vref_mv = voltage_uv / 1000;
} else {
ret = voltage_uv;
--
2.31.1
next prev parent reply other threads:[~2021-05-12 19:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-12 17:49 [PATCH v3 00/12] ad_sigma_delta: convert all drivers to device-managed Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 01/12] iio: adc: ad7124: Fix missbalanced regulator enable / disable on error Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 02/12] iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 03/12] iio: adc: ad7192: Avoid disabling a clock that was never enabled Alexandru Ardelean
2021-05-12 17:49 ` Alexandru Ardelean [this message]
2021-05-13 7:41 ` [PATCH v3 04/12] iio: adc: ad7192: handle zero Avdd regulator value Lars-Peter Clausen
2021-05-13 9:11 ` Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 05/12] iio: adc: ad_sigma_delta: introduct devm_ad_sd_setup_buffer_and_trigger() Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 06/12] iio: adc: ad7793: convert to device-managed functions Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 07/12] iio: adc: ad7791: " Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 08/12] iio: adc: ad7780: " Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 09/12] iio: adc: ad7192: use devm_clk_get_optional() for mclk Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 10/12] iio: adc: ad7192: convert to device-managed functions Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 11/12] iio: adc: ad7124: Use devm_ managed calls for all of probe() + drop remove() Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 12/12] iio: adc: ad_sigma_delta: remove ad_sd_{setup,cleanup}_buffer_and_trigger() Alexandru Ardelean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210512174914.10549-5-aardelean@deviqon.com \
--to=aardelean@deviqon.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alexandru.tachici@analog.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@deviqon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).