From: Alexandru Ardelean <aardelean@deviqon.com>
To: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: jic23@kernel.org, Jonathan.Cameron@huawei.com,
alexandru.tachici@analog.com, linux@deviqon.com,
Alexandru Ardelean <aardelean@deviqon.com>
Subject: [PATCH v3 08/12] iio: adc: ad7780: convert to device-managed functions
Date: Wed, 12 May 2021 20:49:10 +0300 [thread overview]
Message-ID: <20210512174914.10549-9-aardelean@deviqon.com> (raw)
In-Reply-To: <20210512174914.10549-1-aardelean@deviqon.com>
With the devm_ad_sd_setup_buffer_and_trigger() helper, it's a bit easier
now to convert the probe of the AD7780 driver to use device-managed
functions.
Only the regulator disable requires a devm_add_action_or_reset() callback.
This change does that, cleaning up the driver a bit.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
drivers/iio/adc/ad7780.c | 38 ++++++++++----------------------------
1 file changed, 10 insertions(+), 28 deletions(-)
diff --git a/drivers/iio/adc/ad7780.c b/drivers/iio/adc/ad7780.c
index 42e7e8e595d1..42bb952f4738 100644
--- a/drivers/iio/adc/ad7780.c
+++ b/drivers/iio/adc/ad7780.c
@@ -300,6 +300,11 @@ static int ad7780_init_gpios(struct device *dev, struct ad7780_state *st)
return 0;
}
+static void ad7780_reg_disable(void *reg)
+{
+ regulator_disable(reg);
+}
+
static int ad7780_probe(struct spi_device *spi)
{
struct ad7780_state *st;
@@ -318,8 +323,6 @@ static int ad7780_probe(struct spi_device *spi)
st->chip_info =
&ad7780_chip_info_tbl[spi_get_device_id(spi)->driver_data];
- spi_set_drvdata(spi, indio_dev);
-
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = &st->chip_info->channel;
@@ -340,35 +343,15 @@ static int ad7780_probe(struct spi_device *spi)
return ret;
}
- ret = ad_sd_setup_buffer_and_trigger(indio_dev);
+ ret = devm_add_action_or_reset(&spi->dev, ad7780_reg_disable, st->reg);
if (ret)
- goto error_disable_reg;
+ return ret;
- ret = iio_device_register(indio_dev);
+ ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
if (ret)
- goto error_cleanup_buffer_and_trigger;
-
- return 0;
-
-error_cleanup_buffer_and_trigger:
- ad_sd_cleanup_buffer_and_trigger(indio_dev);
-error_disable_reg:
- regulator_disable(st->reg);
-
- return ret;
-}
-
-static int ad7780_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct ad7780_state *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- ad_sd_cleanup_buffer_and_trigger(indio_dev);
-
- regulator_disable(st->reg);
+ return ret;
- return 0;
+ return devm_iio_device_register(&spi->dev, indio_dev);
}
static const struct spi_device_id ad7780_id[] = {
@@ -385,7 +368,6 @@ static struct spi_driver ad7780_driver = {
.name = "ad7780",
},
.probe = ad7780_probe,
- .remove = ad7780_remove,
.id_table = ad7780_id,
};
module_spi_driver(ad7780_driver);
--
2.31.1
next prev parent reply other threads:[~2021-05-12 19:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-12 17:49 [PATCH v3 00/12] ad_sigma_delta: convert all drivers to device-managed Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 01/12] iio: adc: ad7124: Fix missbalanced regulator enable / disable on error Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 02/12] iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 03/12] iio: adc: ad7192: Avoid disabling a clock that was never enabled Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 04/12] iio: adc: ad7192: handle zero Avdd regulator value Alexandru Ardelean
2021-05-13 7:41 ` Lars-Peter Clausen
2021-05-13 9:11 ` Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 05/12] iio: adc: ad_sigma_delta: introduct devm_ad_sd_setup_buffer_and_trigger() Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 06/12] iio: adc: ad7793: convert to device-managed functions Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 07/12] iio: adc: ad7791: " Alexandru Ardelean
2021-05-12 17:49 ` Alexandru Ardelean [this message]
2021-05-12 17:49 ` [PATCH v3 09/12] iio: adc: ad7192: use devm_clk_get_optional() for mclk Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 10/12] iio: adc: ad7192: convert to device-managed functions Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 11/12] iio: adc: ad7124: Use devm_ managed calls for all of probe() + drop remove() Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 12/12] iio: adc: ad_sigma_delta: remove ad_sd_{setup,cleanup}_buffer_and_trigger() Alexandru Ardelean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210512174914.10549-9-aardelean@deviqon.com \
--to=aardelean@deviqon.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alexandru.tachici@analog.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@deviqon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).