linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandru Ardelean <aardelean@deviqon.com>
To: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: jic23@kernel.org, Jonathan.Cameron@huawei.com,
	alexandru.tachici@analog.com, linux@deviqon.com,
	Alexandru Ardelean <ardeleanalex@gmail.com>,
	Alexandru Ardelean <aardelean@deviqon.com>
Subject: [PATCH v3 11/12] iio: adc: ad7124: Use devm_ managed calls for all of probe() + drop remove()
Date: Wed, 12 May 2021 20:49:13 +0300	[thread overview]
Message-ID: <20210512174914.10549-12-aardelean@deviqon.com> (raw)
In-Reply-To: <20210512174914.10549-1-aardelean@deviqon.com>

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

As not many steps were not already devm_ managed, use
devm_add_action_or_reset() to handle the rest.

This also uses the new devm_ad_sd_setup_buffer_and_trigger() function.

Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
 drivers/iio/adc/ad7124.c | 48 +++++++++++++---------------------------
 1 file changed, 15 insertions(+), 33 deletions(-)

diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index a27db78ea13e..e45c600fccc0 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -862,6 +862,11 @@ static void ad7124_reg_disable(void *r)
 	regulator_disable(r);
 }
 
+static void ad7124_clk_disable(void *c)
+{
+	clk_disable_unprepare(c);
+}
+
 static int ad7124_probe(struct spi_device *spi)
 {
 	const struct ad7124_chip_info *info;
@@ -883,8 +888,6 @@ static int ad7124_probe(struct spi_device *spi)
 
 	ad_sd_init(&st->sd, indio_dev, spi, &ad7124_sigma_delta_info);
 
-	spi_set_drvdata(spi, indio_dev);
-
 	indio_dev->name = st->chip_info->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &ad7124_info;
@@ -922,48 +925,28 @@ static int ad7124_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
+	ret = devm_add_action_or_reset(&spi->dev, ad7124_clk_disable, st->mclk);
+	if (ret)
+		return ret;
+
 	ret = ad7124_soft_reset(st);
 	if (ret < 0)
-		goto error_clk_disable_unprepare;
+		return ret;
 
 	ret = ad7124_check_chip_id(st);
 	if (ret)
-		goto error_clk_disable_unprepare;
+		return ret;
 
 	ret = ad7124_setup(st);
 	if (ret < 0)
-		goto error_clk_disable_unprepare;
+		return ret;
 
-	ret = ad_sd_setup_buffer_and_trigger(indio_dev);
+	ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
 	if (ret < 0)
-		goto error_clk_disable_unprepare;
-
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&spi->dev, "Failed to register iio device\n");
-		goto error_remove_trigger;
-	}
-
-	return 0;
-
-error_remove_trigger:
-	ad_sd_cleanup_buffer_and_trigger(indio_dev);
-error_clk_disable_unprepare:
-	clk_disable_unprepare(st->mclk);
-
-	return ret;
-}
-
-static int ad7124_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-	struct ad7124_state *st = iio_priv(indio_dev);
+		return ret;
 
-	iio_device_unregister(indio_dev);
-	ad_sd_cleanup_buffer_and_trigger(indio_dev);
-	clk_disable_unprepare(st->mclk);
+	return devm_iio_device_register(&spi->dev, indio_dev);
 
-	return 0;
 }
 
 static const struct of_device_id ad7124_of_match[] = {
@@ -981,7 +964,6 @@ static struct spi_driver ad71124_driver = {
 		.of_match_table = ad7124_of_match,
 	},
 	.probe = ad7124_probe,
-	.remove	= ad7124_remove,
 };
 module_spi_driver(ad71124_driver);
 
-- 
2.31.1


  parent reply	other threads:[~2021-05-12 19:37 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-12 17:49 [PATCH v3 00/12] ad_sigma_delta: convert all drivers to device-managed Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 01/12] iio: adc: ad7124: Fix missbalanced regulator enable / disable on error Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 02/12] iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 03/12] iio: adc: ad7192: Avoid disabling a clock that was never enabled Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 04/12] iio: adc: ad7192: handle zero Avdd regulator value Alexandru Ardelean
2021-05-13  7:41   ` Lars-Peter Clausen
2021-05-13  9:11     ` Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 05/12] iio: adc: ad_sigma_delta: introduct devm_ad_sd_setup_buffer_and_trigger() Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 06/12] iio: adc: ad7793: convert to device-managed functions Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 07/12] iio: adc: ad7791: " Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 08/12] iio: adc: ad7780: " Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 09/12] iio: adc: ad7192: use devm_clk_get_optional() for mclk Alexandru Ardelean
2021-05-12 17:49 ` [PATCH v3 10/12] iio: adc: ad7192: convert to device-managed functions Alexandru Ardelean
2021-05-12 17:49 ` Alexandru Ardelean [this message]
2021-05-12 17:49 ` [PATCH v3 12/12] iio: adc: ad_sigma_delta: remove ad_sd_{setup,cleanup}_buffer_and_trigger() Alexandru Ardelean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210512174914.10549-12-aardelean@deviqon.com \
    --to=aardelean@deviqon.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alexandru.tachici@analog.com \
    --cc=ardeleanalex@gmail.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@deviqon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).