linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
	plai@codeaurora.org, bgoswami@codeaurora.org, perex@perex.cz,
	tiwai@suse.com, srinivas.kandagatla@linaro.org,
	rohitkr@codeaurora.org, linux-arm-msm@vger.kernel.org,
	alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, swboyd@chromium.org,
	judyhsiao@chromium.org
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Subject: [PATCH] ASoC: qcom: lpass-cpu: Fix pop noise during audio capture begin
Date: Thu, 13 May 2021 17:15:39 +0530	[thread overview]
Message-ID: <20210513114539.4813-1-srivasam@codeaurora.org> (raw)

This patch fixes PoP noise of around 15ms observed during audio capture begin.
Enables BCLK and LRCLK in snd_soc_dai_ops startup call for introducing some delay
before capture start and clock enable.

Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
---
 sound/soc/qcom/lpass-cpu.c | 37 +++++++++++++++++++++++++++++++++----
 1 file changed, 33 insertions(+), 4 deletions(-)

diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index c62d2612e8f5..3dcfc2f115a7 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -73,14 +73,28 @@ static int lpass_cpu_daiops_startup(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
 	struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
-	int ret;
+	struct lpaif_i2sctl *i2sctl = drvdata->i2sctl;
+	unsigned int id = dai->driver->id;
+	int ret = -EINVAL;
 
 	ret = clk_prepare_enable(drvdata->mi2s_osr_clk[dai->driver->id]);
 	if (ret) {
 		dev_err(dai->dev, "error in enabling mi2s osr clk: %d\n", ret);
 		return ret;
 	}
-	ret = clk_prepare(drvdata->mi2s_bit_clk[dai->driver->id]);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		ret = regmap_fields_write(i2sctl->spken, id,
+						 LPAIF_I2SCTL_SPKEN_ENABLE);
+	} else  {
+		ret = regmap_fields_write(i2sctl->micen, id,
+						 LPAIF_I2SCTL_MICEN_ENABLE);
+	}
+	if (ret)
+		dev_err(dai->dev, "error writing to i2sctl reg: %d\n",
+			ret);
+
+	ret = clk_prepare_enable(drvdata->mi2s_bit_clk[dai->driver->id]);
 	if (ret) {
 		dev_err(dai->dev, "error in enabling mi2s bit clk: %d\n", ret);
 		clk_disable_unprepare(drvdata->mi2s_osr_clk[dai->driver->id]);
@@ -93,9 +107,23 @@ static void lpass_cpu_daiops_shutdown(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
 	struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
+	struct lpaif_i2sctl *i2sctl = drvdata->i2sctl;
+	unsigned int id = dai->driver->id;
+	int ret = -EINVAL;
 
 	clk_disable_unprepare(drvdata->mi2s_osr_clk[dai->driver->id]);
-	clk_unprepare(drvdata->mi2s_bit_clk[dai->driver->id]);
+	clk_disable_unprepare(drvdata->mi2s_bit_clk[dai->driver->id]);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		ret = regmap_fields_write(i2sctl->spken, id,
+					 LPAIF_I2SCTL_SPKEN_DISABLE);
+	} else  {
+		ret = regmap_fields_write(i2sctl->micen, id,
+					 LPAIF_I2SCTL_MICEN_DISABLE);
+	}
+	if (ret)
+		dev_err(dai->dev, "error writing to i2sctl reg: %d\n",
+				ret);
 }
 
 static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
@@ -308,7 +336,8 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
 				ret);
 
 		clk_disable(drvdata->mi2s_bit_clk[dai->driver->id]);
-
+		break;
+	default:
 		break;
 	}
 
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


             reply	other threads:[~2021-05-13 11:47 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-13 11:45 Srinivasa Rao Mandadapu [this message]
2021-05-13 13:31 ` [PATCH] ASoC: qcom: lpass-cpu: Fix pop noise during audio capture begin Mark Brown
2021-05-14  6:50   ` Srinivasa Rao Mandadapu
2021-05-14 15:30     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210513114539.4813-1-srivasam@codeaurora.org \
    --to=srivasam@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bgoswami@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=judyhsiao@chromium.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=plai@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=rohitkr@codeaurora.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=swboyd@chromium.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).