From: Alexandru Ardelean <aardelean@deviqon.com>
To: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: jic23@kernel.org, Jonathan.Cameron@huawei.com,
alexandru.tachici@analog.com, linux@deviqon.com,
Alexandru Ardelean <aardelean@deviqon.com>
Subject: [PATCH v4 10/12] iio: adc: ad7192: convert to device-managed functions
Date: Thu, 13 May 2021 15:07:50 +0300 [thread overview]
Message-ID: <20210513120752.90074-11-aardelean@deviqon.com> (raw)
In-Reply-To: <20210513120752.90074-1-aardelean@deviqon.com>
With the devm_ad_sd_setup_buffer_and_trigger() helper, it's a bit easier
now to convert the probe of the AD7192 driver to use device-managed
functions.
The regulators and the mclk requires devm_add_action_or_reset() callbacks
though.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
drivers/iio/adc/ad7192.c | 89 ++++++++++++++++------------------------
1 file changed, 36 insertions(+), 53 deletions(-)
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index 523cf3bc955b..ee8ed9481025 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -908,6 +908,16 @@ static int ad7192_channels_config(struct iio_dev *indio_dev)
return 0;
}
+static void ad7192_reg_disable(void *reg)
+{
+ regulator_disable(reg);
+}
+
+static void ad7192_clk_disable(void *clk)
+{
+ clk_disable_unprepare(clk);
+}
+
static int ad7192_probe(struct spi_device *spi)
{
struct ad7192_state *st;
@@ -937,33 +947,38 @@ static int ad7192_probe(struct spi_device *spi)
return ret;
}
+ ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, st->avdd);
+ if (ret)
+ return ret;
+
st->dvdd = devm_regulator_get(&spi->dev, "dvdd");
- if (IS_ERR(st->dvdd)) {
- ret = PTR_ERR(st->dvdd);
- goto error_disable_avdd;
- }
+ if (IS_ERR(st->dvdd))
+ return PTR_ERR(st->dvdd);
ret = regulator_enable(st->dvdd);
if (ret) {
dev_err(&spi->dev, "Failed to enable specified DVdd supply\n");
- goto error_disable_avdd;
+ return ret;
}
+ ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, st->dvdd);
+ if (ret)
+ return ret;
+
ret = regulator_get_voltage(st->avdd);
if (ret < 0) {
dev_err(&spi->dev, "Device tree error, reference voltage undefined\n");
- goto error_disable_avdd;
+ return ret;
}
st->int_vref_mv = ret / 1000;
- spi_set_drvdata(spi, indio_dev);
st->chip_info = of_device_get_match_data(&spi->dev);
indio_dev->name = st->chip_info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = ad7192_channels_config(indio_dev);
if (ret < 0)
- goto error_disable_dvdd;
+ return ret;
if (st->chip_info->chip_id == CHIPID_AD7195)
indio_dev->info = &ad7195_info;
@@ -972,17 +987,15 @@ static int ad7192_probe(struct spi_device *spi)
ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info);
- ret = ad_sd_setup_buffer_and_trigger(indio_dev);
+ ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
if (ret)
- goto error_disable_dvdd;
+ return ret;
st->fclk = AD7192_INT_FREQ_MHZ;
st->mclk = devm_clk_get_optional(&spi->dev, "mclk");
- if (IS_ERR(st->mclk)) {
- ret = PTR_ERR(st->mclk);
- goto error_remove_trigger;
- }
+ if (IS_ERR(st->mclk))
+ return PTR_ERR(st->mclk);
st->clock_sel = ad7192_of_clock_select(st);
@@ -990,55 +1003,26 @@ static int ad7192_probe(struct spi_device *spi)
st->clock_sel == AD7192_CLK_EXT_MCLK2) {
ret = clk_prepare_enable(st->mclk);
if (ret < 0)
- goto error_remove_trigger;
+ return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, ad7192_clk_disable,
+ st->mclk);
+ if (ret)
+ return ret;
st->fclk = clk_get_rate(st->mclk);
if (!ad7192_valid_external_frequency(st->fclk)) {
- ret = -EINVAL;
dev_err(&spi->dev,
"External clock frequency out of bounds\n");
- goto error_disable_clk;
+ return -EINVAL;
}
}
ret = ad7192_setup(st, spi->dev.of_node);
if (ret)
- goto error_disable_clk;
-
- ret = iio_device_register(indio_dev);
- if (ret < 0)
- goto error_disable_clk;
- return 0;
-
-error_disable_clk:
- if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
- st->clock_sel == AD7192_CLK_EXT_MCLK2)
- clk_disable_unprepare(st->mclk);
-error_remove_trigger:
- ad_sd_cleanup_buffer_and_trigger(indio_dev);
-error_disable_dvdd:
- regulator_disable(st->dvdd);
-error_disable_avdd:
- regulator_disable(st->avdd);
-
- return ret;
-}
-
-static int ad7192_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct ad7192_state *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
- st->clock_sel == AD7192_CLK_EXT_MCLK2)
- clk_disable_unprepare(st->mclk);
- ad_sd_cleanup_buffer_and_trigger(indio_dev);
-
- regulator_disable(st->dvdd);
- regulator_disable(st->avdd);
+ return ret;
- return 0;
+ return devm_iio_device_register(&spi->dev, indio_dev);
}
static const struct of_device_id ad7192_of_match[] = {
@@ -1056,7 +1040,6 @@ static struct spi_driver ad7192_driver = {
.of_match_table = ad7192_of_match,
},
.probe = ad7192_probe,
- .remove = ad7192_remove,
};
module_spi_driver(ad7192_driver);
--
2.31.1
next prev parent reply other threads:[~2021-05-13 12:10 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-13 12:07 [PATCH v4 00/12] ad_sigma_delta: convert all drivers to device-managed Alexandru Ardelean
2021-05-13 12:07 ` [PATCH v4 01/12] iio: adc: ad7124: Fix missbalanced regulator enable / disable on error Alexandru Ardelean
2021-05-13 12:07 ` [PATCH v4 02/12] iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers Alexandru Ardelean
2021-05-13 12:07 ` [PATCH v4 03/12] iio: adc: ad7192: Avoid disabling a clock that was never enabled Alexandru Ardelean
2021-05-13 12:07 ` [PATCH v4 04/12] iio: adc: ad7192: handle regulator voltage error first Alexandru Ardelean
2021-05-13 15:38 ` Jonathan Cameron
2021-05-13 12:07 ` [PATCH v4 05/12] iio: adc: ad_sigma_delta: introduct devm_ad_sd_setup_buffer_and_trigger() Alexandru Ardelean
2021-05-13 12:07 ` [PATCH v4 06/12] iio: adc: ad7793: convert to device-managed functions Alexandru Ardelean
2021-05-13 12:07 ` [PATCH v4 07/12] iio: adc: ad7791: " Alexandru Ardelean
2021-05-13 12:07 ` [PATCH v4 08/12] iio: adc: ad7780: " Alexandru Ardelean
2021-05-13 12:07 ` [PATCH v4 09/12] iio: adc: ad7192: use devm_clk_get_optional() for mclk Alexandru Ardelean
2021-05-13 12:07 ` Alexandru Ardelean [this message]
2021-05-13 12:07 ` [PATCH v4 11/12] iio: adc: ad7124: Use devm_ managed calls for all of probe() + drop remove() Alexandru Ardelean
2021-05-13 12:07 ` [PATCH v4 12/12] iio: adc: ad_sigma_delta: remove ad_sd_{setup,cleanup}_buffer_and_trigger() Alexandru Ardelean
2021-06-09 20:09 ` [PATCH v4 00/12] ad_sigma_delta: convert all drivers to device-managed Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210513120752.90074-11-aardelean@deviqon.com \
--to=aardelean@deviqon.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alexandru.tachici@analog.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@deviqon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).