From: "tip-bot2 for Peter Zijlstra" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>,
Frederic Weisbecker <frederic@kernel.org>,
Ingo Molnar <mingo@kernel.org>,
x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [tip: timers/nohz] tick/nohz: Evaluate the CPU expression after the static key
Date: Thu, 13 May 2021 13:17:29 -0000 [thread overview]
Message-ID: <162091184985.29796.1926500160516806098.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20210512232924.150322-2-frederic@kernel.org>
The following commit has been merged into the timers/nohz branch of tip:
Commit-ID: f105dfec0a951cd0d5bfbfe9dc067ea69f71ad5c
Gitweb: https://git.kernel.org/tip/f105dfec0a951cd0d5bfbfe9dc067ea69f71ad5c
Author: Peter Zijlstra <peterz@infradead.org>
AuthorDate: Thu, 13 May 2021 01:29:15 +02:00
Committer: Ingo Molnar <mingo@kernel.org>
CommitterDate: Thu, 13 May 2021 14:21:20 +02:00
tick/nohz: Evaluate the CPU expression after the static key
When tick_nohz_full_cpu() is called with smp_processor_id(), the latter
is unconditionally evaluated whether the static key is on or off. It is
not necessary in the off-case though, so make sure the cpu expression
is executed at the last moment.
Illustrate with the following test function:
int tick_nohz_test(void)
{
return tick_nohz_full_cpu(smp_processor_id());
}
The resulting code before was:
mov %gs:0x7eea92d1(%rip),%eax # smp_processor_id() fetch
nopl 0x0(%rax,%rax,1)
xor %eax,%eax
retq
cmpb $0x0,0x29d393a(%rip) # <tick_nohz_full_running>
je tick_nohz_test+0x29 # jump to below eax clear
mov %eax,%eax
bt %rax,0x29d3936(%rip) # <tick_nohz_full_mask>
setb %al
movzbl %al,%eax
retq
xor %eax,%eax
retq
Now it becomes:
nopl 0x0(%rax,%rax,1)
xor %eax,%eax
retq
cmpb $0x0,0x29d3871(%rip) # <tick_nohz_full_running>
je tick_nohz_test+0x29 # jump to below eax clear
mov %gs:0x7eea91f0(%rip),%eax # smp_processor_id() fetch, after static key
mov %eax,%eax
bt %rax,0x29d3866(%rip) # <tick_nohz_full_mask>
setb %al
movzbl %al,%eax
retq
xor %eax,%eax
retq
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210512232924.150322-2-frederic@kernel.org
---
include/linux/tick.h | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/include/linux/tick.h b/include/linux/tick.h
index 7340613..2258984 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -185,13 +185,17 @@ static inline bool tick_nohz_full_enabled(void)
return tick_nohz_full_running;
}
-static inline bool tick_nohz_full_cpu(int cpu)
-{
- if (!tick_nohz_full_enabled())
- return false;
-
- return cpumask_test_cpu(cpu, tick_nohz_full_mask);
-}
+/*
+ * Check if a CPU is part of the nohz_full subset. Arrange for evaluating
+ * the cpu expression (typically smp_processor_id()) _after_ the static
+ * key.
+ */
+#define tick_nohz_full_cpu(_cpu) ({ \
+ bool __ret = false; \
+ if (tick_nohz_full_enabled()) \
+ __ret = cpumask_test_cpu((_cpu), tick_nohz_full_mask); \
+ __ret; \
+})
static inline void tick_nohz_full_add_cpus_to(struct cpumask *mask)
{
next prev parent reply other threads:[~2021-05-13 13:19 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-12 23:29 [GIT PULL] tick/nohz updates v3 Frederic Weisbecker
2021-05-12 23:29 ` [PATCH 01/10] tick/nohz: Evaluate the CPU expression after the static key Frederic Weisbecker
2021-05-13 13:17 ` tip-bot2 for Peter Zijlstra [this message]
2021-05-12 23:29 ` [PATCH 02/10] tick/nohz: Conditionally restart tick on idle exit Frederic Weisbecker
2021-05-13 13:17 ` [tip: timers/nohz] " tip-bot2 for Yunfeng Ye
2021-05-12 23:29 ` [PATCH 03/10] tick/nohz: Remove superflous check for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE Frederic Weisbecker
2021-05-13 13:17 ` [tip: timers/nohz] " tip-bot2 for Frederic Weisbecker
2021-05-12 23:29 ` [PATCH 04/10] tick/nohz: Update idle_exittime on actual idle exit Frederic Weisbecker
2021-05-13 13:17 ` [tip: timers/nohz] " tip-bot2 for Yunfeng Ye
2021-05-12 23:29 ` [PATCH 05/10] tick/nohz: Update nohz_full Kconfig help Frederic Weisbecker
2021-05-13 13:17 ` [tip: timers/nohz] " tip-bot2 for Frederic Weisbecker
2021-05-12 23:29 ` [PATCH 06/10] tick/nohz: Only wakeup a single target cpu when kicking a task Frederic Weisbecker
2021-05-13 13:17 ` [tip: timers/nohz] tick/nohz: Only wake up " tip-bot2 for Frederic Weisbecker
2021-05-12 23:29 ` [PATCH 07/10] tick/nohz: Change signal tick dependency to wakeup CPUs of member tasks Frederic Weisbecker
2021-05-13 13:17 ` [tip: timers/nohz] tick/nohz: Change signal tick dependency to wake up " tip-bot2 for Marcelo Tosatti
2021-05-12 23:29 ` [PATCH 08/10] tick/nohz: Kick only _queued_ task whose tick dependency is updated Frederic Weisbecker
2021-05-13 13:17 ` [tip: timers/nohz] " tip-bot2 for Marcelo Tosatti
2021-05-12 23:29 ` [PATCH 09/10] tick/nohz: Call tick_nohz_task_switch() with interrupts disabled Frederic Weisbecker
2021-05-13 13:17 ` [tip: timers/nohz] " tip-bot2 for Peter Zijlstra
2021-05-12 23:29 ` [PATCH 10/10] MAINTAINERS: Add myself as context tracking maintainer Frederic Weisbecker
2021-05-19 9:21 ` [tip: timers/nohz] " tip-bot2 for Frederic Weisbecker
2021-05-13 12:23 ` [GIT PULL] tick/nohz updates v3 Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=162091184985.29796.1926500160516806098.tip-bot2@tip-bot2 \
--to=tip-bot2@linutronix.de \
--cc=frederic@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).