From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Rob Herring <robh+dt@kernel.org>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mips@vger.kernel.org,
Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: [PATCH v1 2/3] MIPS: ath79: ar9331: Add OpeneEmbed SOM9331 Board
Date: Fri, 14 May 2021 07:17:42 +0200 [thread overview]
Message-ID: <20210514051743.15248-2-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210514051743.15248-1-o.rempel@pengutronix.de>
Add SOM9331 based Board. It has 3 LAN ports, usb to uart controller and
USB type A port.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/mips/boot/dts/qca/Makefile | 1 +
.../qca/ar9331_openembed_som9331_board.dts | 110 ++++++++++++++++++
2 files changed, 111 insertions(+)
create mode 100644 arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
index 4451cf45b0ad..6749f77068a8 100644
--- a/arch/mips/boot/dts/qca/Makefile
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -4,4 +4,5 @@ dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb
dtb-$(CONFIG_ATH79) += ar9331_dpt_module.dtb
dtb-$(CONFIG_ATH79) += ar9331_dragino_ms14.dtb
dtb-$(CONFIG_ATH79) += ar9331_omega.dtb
+dtb-$(CONFIG_ATH79) += ar9331_openembed_som9331_board.dtb
dtb-$(CONFIG_ATH79) += ar9331_tl_mr3020.dtb
diff --git a/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
new file mode 100644
index 000000000000..e6622f8e8c2b
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "OpenEmbed SOM9331 Board";
+ compatible = "openembed,som9331";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ /* Winbond 25Q64FVSIG SPI flash */
+ spiflash: w25q64@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q64", "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+};
+
+ð1 {
+ status = "okay";
+};
+
+&switch_port1 {
+ label = "lan0";
+ status = "okay";
+};
+
+&switch_port3 {
+ label = "lan1";
+ status = "okay";
+};
+
+&phy_port0 {
+ status = "okay";
+};
+
+&phy_port2 {
+ status = "okay";
+};
+
+&phy_port4 {
+ status = "okay";
+};
--
2.29.2
next prev parent reply other threads:[~2021-05-14 5:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-14 5:17 [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for OpenEmbed Oleksij Rempel
2021-05-14 5:17 ` Oleksij Rempel [this message]
2021-05-27 11:43 ` [PATCH v1 2/3] MIPS: ath79: ar9331: Add OpeneEmbed SOM9331 Board Thomas Bogendoerfer
2021-05-14 5:17 ` [PATCH v1 3/3] MIPS: ath79: ar9331: add pause property for the MAC <> switch link Oleksij Rempel
2021-05-27 11:43 ` Thomas Bogendoerfer
2021-05-18 1:21 ` [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for OpenEmbed Rob Herring
2021-05-27 11:43 ` Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210514051743.15248-2-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).