linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dario Binacchi <dariobin@libero.it>
To: linux-kernel@vger.kernel.org
Cc: Dario Binacchi <dariobin@libero.it>,
	Haojian Zhuang <haojian.zhuang@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Tony Lindgren <tony@atomide.com>,
	linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
	linux-omap@vger.kernel.org
Subject: [PATCH] pinctrl: single: config: enable the pin's input
Date: Fri, 14 May 2021 18:38:18 +0200	[thread overview]
Message-ID: <20210514163818.12178-1-dariobin@libero.it> (raw)

It enables / disables the input buffer. As explained in the description
of 'enum pin_config_param' this does not affect the pin's ability to
drive output.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
---

 drivers/pinctrl/pinctrl-single.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 2c9c9835f375..4e7cdb9ee855 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -534,6 +534,7 @@ static int pcs_pinconf_get(struct pinctrl_dev *pctldev,
 		case PIN_CONFIG_DRIVE_STRENGTH:
 		case PIN_CONFIG_SLEW_RATE:
 		case PIN_CONFIG_MODE_LOW_POWER:
+		case PIN_CONFIG_INPUT_ENABLE:
 		default:
 			*config = data;
 			break;
@@ -572,6 +573,7 @@ static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
 			case PIN_CONFIG_DRIVE_STRENGTH:
 			case PIN_CONFIG_SLEW_RATE:
 			case PIN_CONFIG_MODE_LOW_POWER:
+			case PIN_CONFIG_INPUT_ENABLE:
 				shift = ffs(func->conf[i].mask) - 1;
 				data &= ~func->conf[i].mask;
 				data |= (arg << shift) & func->conf[i].mask;
@@ -918,6 +920,7 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
 	static const struct pcs_conf_type prop2[] = {
 		{ "pinctrl-single,drive-strength", PIN_CONFIG_DRIVE_STRENGTH, },
 		{ "pinctrl-single,slew-rate", PIN_CONFIG_SLEW_RATE, },
+		{ "pinctrl-single,input-enable", PIN_CONFIG_INPUT_ENABLE, },
 		{ "pinctrl-single,input-schmitt", PIN_CONFIG_INPUT_SCHMITT, },
 		{ "pinctrl-single,low-power-mode", PIN_CONFIG_MODE_LOW_POWER, },
 	};
-- 
2.17.1


             reply	other threads:[~2021-05-14 16:38 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-14 16:38 Dario Binacchi [this message]
2021-05-18  6:08 ` [PATCH] pinctrl: single: config: enable the pin's input Tony Lindgren
2021-05-18  9:01   ` Dario Binacchi
2021-05-18 20:19   ` Dario Binacchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210514163818.12178-1-dariobin@libero.it \
    --to=dariobin@libero.it \
    --cc=haojian.zhuang@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).