linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Ansuel Smith <ansuelsmth@gmail.com>
Subject: [PATCH net-next v6 17/25] net: dsa: qca8k: clear MASTER_EN after phy read/write
Date: Fri, 14 May 2021 23:00:07 +0200	[thread overview]
Message-ID: <20210514210015.18142-18-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20210514210015.18142-1-ansuelsmth@gmail.com>

Clear MDIO_MASTER_EN bit from MDIO_MASTER_CTRL after read/write
operation. The MDIO_MASTER_EN bit is not reset after read/write
operation and the next operation can be wrongly interpreted by the
switch as a mdio operation. This cause a production of wrong/garbage
data from the switch and underfined bheavior. (random port drop,
unplugged port flagged with link up, wrong port speed)
Also on driver remove the MASTER_CTRL can be left set and cause the
malfunction of any next driver using the mdio device.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca8k.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index dedbc6565516..a2b4d5097868 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -649,8 +649,14 @@ qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
 	if (ret)
 		return ret;
 
-	return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
-		QCA8K_MDIO_MASTER_BUSY);
+	ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
+			      QCA8K_MDIO_MASTER_BUSY);
+
+	/* even if the busy_wait timeouts try to clear the MASTER_EN */
+	qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
+			QCA8K_MDIO_MASTER_EN);
+
+	return ret;
 }
 
 static int
@@ -685,6 +691,10 @@ qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
 
 	val &= QCA8K_MDIO_MASTER_DATA_MASK;
 
+	/* even if the busy_wait timeouts try to clear the MASTER_EN */
+	qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
+			QCA8K_MDIO_MASTER_EN);
+
 	return val;
 }
 
-- 
2.30.2


  parent reply	other threads:[~2021-05-14 21:01 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-14 20:59 [PATCH net-next v6 00/25] Multiple improvement to qca8k stability Ansuel Smith
2021-05-14 20:59 ` [PATCH net-next v6 01/25] net: dsa: qca8k: change simple print to dev variant Ansuel Smith
2021-05-14 22:43   ` Russell King (Oracle)
2021-05-14 20:59 ` [PATCH net-next v6 02/25] net: dsa: qca8k: use iopoll macro for qca8k_busy_wait Ansuel Smith
2021-05-14 22:52   ` Russell King (Oracle)
2021-05-14 23:07     ` Ansuel Smith
2021-05-14 20:59 ` [PATCH net-next v6 03/25] net: dsa: qca8k: improve qca8k read/write/rmw bus access Ansuel Smith
2021-05-14 22:53   ` Russell King (Oracle)
2021-05-14 20:59 ` [PATCH net-next v6 04/25] net: dsa: qca8k: handle qca8k_set_page errors Ansuel Smith
2021-05-14 22:55   ` Russell King (Oracle)
2021-05-14 20:59 ` [PATCH net-next v6 05/25] net: dsa: qca8k: handle error with qca8k_read operation Ansuel Smith
2021-05-14 23:01   ` Russell King (Oracle)
2021-05-14 20:59 ` [PATCH net-next v6 06/25] net: dsa: qca8k: handle error with qca8k_write operation Ansuel Smith
2021-05-14 20:59 ` [PATCH net-next v6 07/25] net: dsa: qca8k: handle error with qca8k_rmw operation Ansuel Smith
2021-05-14 20:59 ` [PATCH net-next v6 08/25] net: dsa: qca8k: handle error from qca8k_busy_wait Ansuel Smith
2021-05-14 20:59 ` [PATCH net-next v6 09/25] net: dsa: qca8k: add support for qca8327 switch Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 10/25] devicetree: net: dsa: qca8k: Document new compatible qca8327 Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 11/25] net: dsa: qca8k: add priority tweak to qca8337 switch Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 12/25] net: dsa: qca8k: limit port5 delay to qca8337 Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 13/25] net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327 Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 14/25] net: dsa: qca8k: add support for switch rev Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 15/25] net: dsa: qca8k: add ethernet-ports fallback to setup_mdio_bus Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 16/25] net: dsa: qca8k: make rgmii delay configurable Ansuel Smith
2021-05-14 21:00 ` Ansuel Smith [this message]
2021-05-14 21:00 ` [PATCH net-next v6 18/25] net: dsa: qca8k: dsa: qca8k: protect MASTER busy_wait with mdio mutex Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 19/25] net: dsa: qca8k: enlarge mdio delay and timeout Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 20/25] net: dsa: qca8k: add support for internal phy and internal mdio Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 21/25] devicetree: bindings: dsa: qca8k: Document internal mdio definition Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 22/25] net: dsa: qca8k: improve internal mdio read/write bus access Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 23/25] net: dsa: qca8k: pass switch_revision info to phy dev_flags Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 24/25] net: phy: at803x: clean whitespace errors Ansuel Smith
2021-05-14 21:00 ` [PATCH net-next v6 25/25] net: phy: add support for qca8k switch internal PHY in at803x Ansuel Smith
2021-05-14 22:40 ` [PATCH net-next v6 00/25] Multiple improvement to qca8k stability patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210514210015.18142-18-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).