linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dario Binacchi <dariobin@libero.it>
To: linux-kernel@vger.kernel.org
Cc: Dario Binacchi <dariobin@libero.it>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-gpio@vger.kernel.org
Subject: [PATCH 1/2] pinctrl: core: configure pinmux from pins debug file
Date: Sun, 16 May 2021 15:55:30 +0200	[thread overview]
Message-ID: <20210516135531.2203-2-dariobin@libero.it> (raw)
In-Reply-To: <20210516135531.2203-1-dariobin@libero.it>

The MPUs of some architectures (e.g AM335x) must be in privileged
operating mode to write on the pinmux registers. In such cases, where
writes will not work from user space, now it can be done from the pins
debug file if the platform driver exports the pin_dbg_set() helper among
the registered operations.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
---

 drivers/pinctrl/core.c          | 56 +++++++++++++++++++++++++++++++--
 include/linux/pinctrl/pinctrl.h |  2 ++
 2 files changed, 56 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index a4ac87c8b4f8..f5c9a7d44039 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1620,6 +1620,46 @@ EXPORT_SYMBOL_GPL(pinctrl_pm_select_idle_state);
 
 #ifdef CONFIG_DEBUG_FS
 
+static ssize_t pinctrl_pins_write(struct file *file,
+				  const char __user *user_buf, size_t count,
+				  loff_t *ppos)
+{
+	struct seq_file	*s = file->private_data;
+	struct pinctrl_dev *pctldev = s->private;
+	const struct pinctrl_ops *ops = pctldev->desc->pctlops;
+	char buf[32];
+	char *c = &buf[0];
+	char *token;
+	int ret, buf_size;
+	unsigned int i, pin;
+
+	if (!ops->pin_dbg_set)
+		return -EFAULT;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	buf[buf_size] = 0;
+	token = strsep(&c, " ");
+	if (kstrtouint(token, 0, &pin))
+		return -EINVAL;
+
+	for (i = 0; i < pctldev->desc->npins; i++) {
+		if (pin != pctldev->desc->pins[i].number)
+			continue;
+
+		ret = ops->pin_dbg_set(pctldev, pin, c);
+		if (ret)
+			return ret;
+
+		return count;
+	}
+
+	return -EINVAL;
+}
+
 static int pinctrl_pins_show(struct seq_file *s, void *what)
 {
 	struct pinctrl_dev *pctldev = s->private;
@@ -1677,7 +1717,11 @@ static int pinctrl_pins_show(struct seq_file *s, void *what)
 
 	return 0;
 }
-DEFINE_SHOW_ATTRIBUTE(pinctrl_pins);
+
+static int pinctrl_pins_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pinctrl_pins_show, inode->i_private);
+}
 
 static int pinctrl_groups_show(struct seq_file *s, void *what)
 {
@@ -1886,6 +1930,14 @@ static int pinctrl_show(struct seq_file *s, void *what)
 }
 DEFINE_SHOW_ATTRIBUTE(pinctrl);
 
+static const struct file_operations pinctrl_pins_fops = {
+	.open		= pinctrl_pins_open,
+	.read		= seq_read,
+	.write		= pinctrl_pins_write,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
 static struct dentry *debugfs_root;
 
 static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
@@ -1915,7 +1967,7 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
 			dev_name(pctldev->dev));
 		return;
 	}
-	debugfs_create_file("pins", 0444,
+	debugfs_create_file("pins", 0644,
 			    device_root, pctldev, &pinctrl_pins_fops);
 	debugfs_create_file("pingroups", 0444,
 			    device_root, pctldev, &pinctrl_groups_fops);
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 70b45d28e7a9..6db4a775f549 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -95,6 +95,8 @@ struct pinctrl_ops {
 			       unsigned *num_pins);
 	void (*pin_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s,
 			  unsigned offset);
+	int (*pin_dbg_set) (struct pinctrl_dev *pctldev, unsigned int offset,
+			    char *buf);
 	int (*dt_node_to_map) (struct pinctrl_dev *pctldev,
 			       struct device_node *np_config,
 			       struct pinctrl_map **map, unsigned *num_maps);
-- 
2.17.1


  reply	other threads:[~2021-05-16 13:55 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-16 13:55 [PATCH 0/2] am335x: set pinmux registers from pins debug file Dario Binacchi
2021-05-16 13:55 ` Dario Binacchi [this message]
2021-05-17 20:02   ` [PATCH 1/2] pinctrl: core: configure pinmux " Andy Shevchenko
2021-05-17 22:57     ` Drew Fustini
2021-05-18  9:38       ` Dario Binacchi
2021-05-18 10:21         ` Drew Fustini
2021-05-18 10:41           ` Andy Shevchenko
2021-05-18 13:57     ` Dario Binacchi
2021-05-18 14:01       ` Andy Shevchenko
2021-05-19 10:02         ` Drew Fustini
2021-05-19 11:27           ` Andy Shevchenko
2021-05-20  4:17             ` Drew Fustini
2021-05-20  8:10               ` Andy Shevchenko
2021-05-16 13:55 ` [PATCH 2/2] pinctrl: single: set " Dario Binacchi
2021-05-17  5:57   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210516135531.2203-2-dariobin@libero.it \
    --to=dariobin@libero.it \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).