From: Erik Rosen <erik.rosen@metormote.com>
To: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Erik Rosen <erik.rosen@metormote.com>
Subject: [PATCH v3 5/6] hwmon: (pmbus/pim4328) Add PMBus driver for PIM4006, PIM4328 and PIM4820
Date: Mon, 24 May 2021 17:02:45 +0200 [thread overview]
Message-ID: <20210524150246.90546-6-erik.rosen@metormote.com> (raw)
In-Reply-To: <20210524150246.90546-1-erik.rosen@metormote.com>
Add hardware monitoring support for Flex power interface modules PIM4006,
PIM4328 and PIM4820.
Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
---
drivers/hwmon/pmbus/Kconfig | 9 ++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/pim4328.c | 240 ++++++++++++++++++++++++++++++++++
3 files changed, 250 insertions(+)
create mode 100644 drivers/hwmon/pmbus/pim4328.c
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 37a5c39784fa..001527c71269 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -257,6 +257,15 @@ config SENSORS_MP2975
This driver can also be built as a module. If so, the module will
be called mp2975.
+config SENSORS_PIM4328
+ tristate "Flex PIM4328 and compatibles"
+ help
+ If you say yes here you get hardware monitoring support for Flex
+ PIM4328, PIM4820 and PIM4006 Power Interface Modules.
+
+ This driver can also be built as a module. If so, the module will
+ be called pim4328.
+
config SENSORS_PM6764TR
tristate "ST PM6764TR"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index f8dcc27cd56a..2a12397535ba 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -39,3 +39,4 @@ obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
+obj-$(CONFIG_SENSORS_PIM4328) += pim4328.o
diff --git a/drivers/hwmon/pmbus/pim4328.c b/drivers/hwmon/pmbus/pim4328.c
new file mode 100644
index 000000000000..ead7419479ef
--- /dev/null
+++ b/drivers/hwmon/pmbus/pim4328.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for PIM4006, PIM4328 and PIM4820
+ *
+ * Copyright (c) 2021 Flextronics International Sweden AB
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include <linux/slab.h>
+#include "pmbus.h"
+
+enum chips { pim4006, pim4328, pim4820 };
+
+struct pim4328_data {
+ enum chips id;
+ struct pmbus_driver_info info;
+};
+
+#define to_pim4328_data(x) container_of(x, struct pim4328_data, info)
+
+/* PIM4006 and PIM4328 */
+#define PIM4328_MFR_READ_VINA 0xd3
+#define PIM4328_MFR_READ_VINB 0xd4
+
+/* PIM4006 */
+#define PIM4328_MFR_READ_IINA 0xd6
+#define PIM4328_MFR_READ_IINB 0xd7
+#define PIM4328_MFR_FET_CHECKSTATUS 0xd9
+
+/* PIM4328 */
+#define PIM4328_MFR_STATUS_BITS 0xd5
+
+/* PIM4820 */
+#define PIM4328_MFR_READ_STATUS 0xd0
+
+static const struct i2c_device_id pim4328_id[] = {
+ {"bmr455", pim4328},
+ {"pim4006", pim4006},
+ {"pim4106", pim4006},
+ {"pim4206", pim4006},
+ {"pim4306", pim4006},
+ {"pim4328", pim4328},
+ {"pim4406", pim4006},
+ {"pim4820", pim4820},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, pim4328_id);
+
+static int pim4328_read_word_data(struct i2c_client *client, int page,
+ int phase, int reg)
+{
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_READ_VIN:
+ if (phase != 0xff) {
+ ret = pmbus_read_word_data(client, page, phase,
+ phase == 0 ? PIM4328_MFR_READ_VINA
+ : PIM4328_MFR_READ_VINB);
+ } else {
+ ret = -ENODATA;
+ }
+ break;
+ case PMBUS_READ_IIN:
+ if (phase != 0xff) {
+ ret = pmbus_read_word_data(client, page, phase,
+ phase == 0 ? PIM4328_MFR_READ_IINA
+ : PIM4328_MFR_READ_IINB);
+ } else {
+ ret = -ENODATA;
+ }
+ break;
+ default:
+ ret = -ENODATA;
+ }
+
+ return ret;
+}
+
+static int pim4328_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct pim4328_data *data = to_pim4328_data(info);
+ int ret, status;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_STATUS_BYTE:
+ ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
+ if (ret >= 0) {
+ if (data->id == pim4006) {
+ status = pmbus_read_word_data(client, page, 0xff,
+ PIM4328_MFR_FET_CHECKSTATUS);
+ if (status > 0) {
+ if (status & 0x0630) /* Input UV */
+ ret |= 0x08;
+ }
+ } else if (data->id == pim4328) {
+ status = pmbus_read_byte_data(client, page,
+ PIM4328_MFR_STATUS_BITS);
+ if (status > 0) {
+ if (status & 0x04) /* Input UV */
+ ret |= 0x08;
+ if (status & 0x40) /* Output UV */
+ ret |= 0x80;
+ }
+ } else if (data->id == pim4820) {
+ status = pmbus_read_byte_data(client, page,
+ PIM4328_MFR_READ_STATUS);
+ if (status > 0) {
+ if (status & 0x05) /* Input OV or OC */
+ ret |= 0x01;
+ if (status & 0x1a) /* Input UV */
+ ret |= 0x08;
+ if (status & 0x40) /* OT */
+ ret |= 0x04;
+ }
+ }
+ }
+ break;
+ default:
+ ret = -ENODATA;
+ }
+
+ return ret;
+}
+
+static int pim4328_probe(struct i2c_client *client)
+{
+ int status;
+ u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+ const struct i2c_device_id *mid;
+ struct pim4328_data *data;
+ struct pmbus_driver_info *info;
+ struct pmbus_platform_data *pdata;
+ struct device *dev = &client->dev;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA
+ | I2C_FUNC_SMBUS_BLOCK_DATA))
+ return -ENODEV;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct pim4328_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ status = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, device_id);
+ if (status < 0) {
+ dev_err(&client->dev, "Failed to read Manufacturer Model\n");
+ return status;
+ }
+ for (mid = pim4328_id; mid->name[0]; mid++) {
+ if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+ break;
+ }
+ if (!mid->name[0]) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+
+ if (strcmp(client->name, mid->name) != 0)
+ dev_notice(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ client->name, mid->name);
+
+ data->id = mid->driver_data;
+ info = &data->info;
+ info->pages = 1;
+ info->read_byte_data = pim4328_read_byte_data;
+ info->read_word_data = pim4328_read_word_data;
+
+ switch (data->id) {
+ case pim4006:
+ info->phases[0] = 2;
+ info->func[0] = PMBUS_PHASE_VIRTUAL | PMBUS_HAVE_VIN
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_IOUT;
+ info->pfunc[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN;
+ info->pfunc[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN;
+ break;
+ case pim4328:
+ info->phases[0] = 2;
+ info->func[0] = PMBUS_PHASE_VIRTUAL
+ | PMBUS_HAVE_VCAP | PMBUS_HAVE_VIN
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_IOUT;
+ info->pfunc[0] = PMBUS_HAVE_VIN;
+ info->pfunc[1] = PMBUS_HAVE_VIN;
+ info->format[PSC_VOLTAGE_IN] = direct;
+ info->format[PSC_TEMPERATURE] = direct;
+ info->format[PSC_CURRENT_OUT] = direct;
+ break;
+ case pim4820:
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_IIN;
+ info->format[PSC_VOLTAGE_IN] = direct;
+ info->format[PSC_TEMPERATURE] = direct;
+ info->format[PSC_CURRENT_IN] = direct;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ pdata = devm_kzalloc(dev, sizeof(struct pmbus_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->flags = PMBUS_NO_CAPABILITY | PMBUS_NO_WRITE_PROTECT;
+ if (data->id == pim4328 || data->id == pim4820)
+ pdata->flags |= PMBUS_USE_COEFFICIENTS_CMD;
+
+ dev->platform_data = pdata;
+
+ return pmbus_do_probe(client, info);
+}
+
+static struct i2c_driver pim4328_driver = {
+ .driver = {
+ .name = "pim4328",
+ },
+ .probe_new = pim4328_probe,
+ .id_table = pim4328_id,
+};
+
+module_i2c_driver(pim4328_driver);
+
+MODULE_AUTHOR("Erik Rosen <erik.rosen@metormote.com>");
+MODULE_DESCRIPTION("PMBus driver for PIM4006, PIM4328, PIM4820 power interface modules");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--
2.20.1
next prev parent reply other threads:[~2021-05-24 15:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-24 15:02 [PATCH v3 0/6] hwmon: (pmbus/pim4328) Add pim4328 PMBus driver Erik Rosen
2021-05-24 15:02 ` [PATCH v3 1/6] hwmon: (pmbus/pim4328) Add new pmbus flag NO_WRITE_PROTECT Erik Rosen
2021-05-24 15:02 ` [PATCH v3 2/6] hwmon: (pmbus/pim4328) Add function for reading direct mode coefficients Erik Rosen
2021-05-26 4:04 ` Guenter Roeck
2021-05-24 15:02 ` [PATCH v3 3/6] hwmon: (pmbus/pim4328) Add support for reading direct format coefficients Erik Rosen
2021-05-26 4:15 ` Guenter Roeck
2021-05-24 15:02 ` [PATCH v3 4/6] hwmon: (pmbus/pim4328) Allow phase function even if it's not on page Erik Rosen
2021-05-24 15:02 ` Erik Rosen [this message]
2021-05-26 4:30 ` [PATCH v3 5/6] hwmon: (pmbus/pim4328) Add PMBus driver for PIM4006, PIM4328 and PIM4820 Guenter Roeck
2021-05-24 15:02 ` [PATCH v3 6/6] hwmon: (pmbus/pim4328) Add documentation for the pim4328 PMBus driver Erik Rosen
2021-05-26 4:32 ` Guenter Roeck
2021-05-27 13:58 ` Erik Rosen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210524150246.90546-6-erik.rosen@metormote.com \
--to=erik.rosen@metormote.com \
--cc=corbet@lwn.net \
--cc=jdelvare@suse.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).