From: "tip-bot2 for H. Peter Anvin (Intel)" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: "H. Peter Anvin (Intel)" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [tip: x86/irq] x86/idt: Remove address argument from idt_invalidate()
Date: Tue, 25 May 2021 09:29:16 -0000 [thread overview]
Message-ID: <162193495637.29796.13783203759887655053.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20210519212154.511983-5-hpa@zytor.com>
The following commit has been merged into the x86/irq branch of tip:
Commit-ID: 8ec9069a432c873e52e6f4ce1496f282a4299604
Gitweb: https://git.kernel.org/tip/8ec9069a432c873e52e6f4ce1496f282a4299604
Author: H. Peter Anvin (Intel) <hpa@zytor.com>
AuthorDate: Wed, 19 May 2021 14:21:50 -07:00
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Fri, 21 May 2021 12:36:45 +02:00
x86/idt: Remove address argument from idt_invalidate()
There is no reason to specify any specific address to idt_invalidate(). It
looks mostly like an artifact of unifying code done differently by
accident. The most "sensible" address to set here is a NULL pointer -
virtual address zero, just as a visual marker.
This also makes it possible to mark the struct desc_ptr in idt_invalidate()
as static const.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210519212154.511983-5-hpa@zytor.com
---
arch/x86/include/asm/desc.h | 2 +-
arch/x86/kernel/idt.c | 5 ++---
arch/x86/kernel/machine_kexec_32.c | 2 +-
arch/x86/kernel/reboot.c | 2 +-
4 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index 476082a..b8429ae 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -427,6 +427,6 @@ static inline void idt_setup_early_pf(void) { }
static inline void idt_setup_ist_traps(void) { }
#endif
-extern void idt_invalidate(void *addr);
+extern void idt_invalidate(void);
#endif /* _ASM_X86_DESC_H */
diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c
index d552f17..2779f52 100644
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -331,11 +331,10 @@ void __init idt_setup_early_handler(void)
/**
* idt_invalidate - Invalidate interrupt descriptor table
- * @addr: The virtual address of the 'invalid' IDT
*/
-void idt_invalidate(void *addr)
+void idt_invalidate(void)
{
- struct desc_ptr idt = { .address = (unsigned long) addr, .size = 0 };
+ static const struct desc_ptr idt = { .address = 0, .size = 0 };
load_idt(&idt);
}
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 64b00b0..1e34fee 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -232,7 +232,7 @@ void machine_kexec(struct kimage *image)
* The gdt & idt are now invalid.
* If you want to load them you must set up your own idt & gdt.
*/
- idt_invalidate(phys_to_virt(0));
+ idt_invalidate();
set_gdt(phys_to_virt(0), 0);
/* now call it */
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index b29657b..ebfb911 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -669,7 +669,7 @@ static void native_machine_emergency_restart(void)
break;
case BOOT_TRIPLE:
- idt_invalidate(NULL);
+ idt_invalidate();
__asm__ __volatile__("int3");
/* We're probably dead after this, but... */
next prev parent reply other threads:[~2021-05-25 9:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 21:21 [PATCH v3 0/8] x86/irq: trap and interrupt cleanups H. Peter Anvin
2021-05-19 21:21 ` [PATCH v3 1/8] x86/traps: add X86_NR_HW_TRAPS to <asm/trapnr.h> H. Peter Anvin
2021-05-19 22:17 ` Thomas Gleixner
2021-05-19 22:24 ` H. Peter Anvin
2021-05-20 7:10 ` Thomas Gleixner
2021-05-19 21:21 ` [PATCH v3 2/8] x86/irqvector: add NR_EXTERNAL_VECTORS and NR_SYSTEM_VECTORS H. Peter Anvin
2021-05-25 9:29 ` [tip: x86/irq] x86/irq: Add and use " tip-bot2 for H. Peter Anvin (Intel)
2021-05-19 21:21 ` [PATCH v3 3/8] x86/irq: remove unused vectors from <asm/irq_vectors.h> H. Peter Anvin
2021-05-25 9:29 ` [tip: x86/irq] x86/irq: Remove unused vectors defines tip-bot2 for H. Peter Anvin (Intel)
2021-05-19 21:21 ` [PATCH v3 4/8] x86/idt: remove address argument to idt_invalidate() H. Peter Anvin
2021-05-25 9:29 ` tip-bot2 for H. Peter Anvin (Intel) [this message]
2021-05-19 21:21 ` [PATCH v3 5/8] x86/desc: add native_[ig]dt_invalidate() to <asm/desc.h> H. Peter Anvin
2021-05-25 9:29 ` [tip: x86/irq] x86: Add native_[ig]dt_invalidate() tip-bot2 for H. Peter Anvin (Intel)
2021-05-19 21:21 ` [PATCH v3 6/8] x86/kexec: set_[gi]dt() -> native_[gi]dt_invalidate() in machine_kexec_*.c H. Peter Anvin
2021-05-25 9:29 ` [tip: x86/irq] x86/kexec: Set_[gi]dt() " tip-bot2 for H. Peter Anvin (Intel)
2021-05-19 21:21 ` [PATCH v3 7/8] x86/irq: WARN_ONCE() if irq_move_cleanup is called on a pending interrupt H. Peter Anvin
2021-05-20 14:00 ` Thomas Gleixner
2021-05-19 21:21 ` [PATCH v3 8/8] x86/irq: merge and functionalize common code in DECLARE/DEFINE_IDTENTRY_* H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=162193495637.29796.13783203759887655053.tip-bot2@tip-bot2 \
--to=tip-bot2@linutronix.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).