From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org
Cc: bhupesh.sharma@linaro.org, bhupesh.linux@gmail.com,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Linus Walleij <linus.walleij@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Andy Gross <agross@kernel.org>
Subject: [PATCH v2 05/10] regulator: qcom-rpmh: Cleanup terminator line commas
Date: Tue, 15 Jun 2021 13:15:38 +0530 [thread overview]
Message-ID: <20210615074543.26700-6-bhupesh.sharma@linaro.org> (raw)
In-Reply-To: <20210615074543.26700-1-bhupesh.sharma@linaro.org>
Cleanup the qcom-rpmh regulator driver:
- remove comma(s) at the end of the terminator line.
- add missing terminator in instances of
pm7325x_vreg_data[] arrays.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
drivers/regulator/qcom-rpmh-regulator.c | 26 +++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 22fec370fa61..af41a517da99 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -811,12 +811,12 @@ static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
RPMH_VREG("ldo28", "ldo%s28", &pmic4_pldo, "vdd-l16-l28"),
RPMH_VREG("lvs1", "vs%s1", &pmic4_lvs, "vin-lvs-1-2"),
RPMH_VREG("lvs2", "vs%s2", &pmic4_lvs, "vin-lvs-1-2"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
RPMH_VREG("bob", "bob%s1", &pmic4_bob, "vdd-bob"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
@@ -824,7 +824,7 @@ static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
RPMH_VREG("smps2", "smp%s2", &pmic4_ftsmps426, "vdd-s2"),
RPMH_VREG("smps3", "smp%s3", &pmic4_ftsmps426, "vdd-s3"),
RPMH_VREG("smps4", "smp%s4", &pmic4_ftsmps426, "vdd-s4"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
@@ -856,7 +856,7 @@ static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l13-l16-l17"),
RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l13-l16-l17"),
RPMH_VREG("ldo18", "ldo%s18", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
@@ -880,7 +880,7 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l9-l10"),
RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"),
RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
@@ -906,7 +906,7 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l8"),
RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l6-l9-l10"),
RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l6-l9-l10"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
@@ -934,7 +934,7 @@ static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l1-l12"),
RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
@@ -947,7 +947,7 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l7"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
@@ -960,7 +960,7 @@ static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo7", "ldo%s6", &pmic5_pldo_lv, "vdd-l7"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
@@ -988,7 +988,7 @@ static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
RPMH_VREG("ldo18", "ldo%s18", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
RPMH_VREG("ldo19", "ldo%s19", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
@@ -1012,7 +1012,7 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l9-l10"),
RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"),
RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
@@ -1039,7 +1039,7 @@ static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
RPMH_VREG("ldo14", "ldo%s14", &pmic5_nldo, "vdd-l14"),
RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo, "vdd-l15"),
RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l16"),
- {},
+ {}
};
static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
@@ -1070,6 +1070,7 @@ static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
RPMH_VREG("ldo18", "ldo%s18", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
RPMH_VREG("ldo19", "ldo%s19", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
+ {}
};
static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
@@ -1083,6 +1084,7 @@ static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l5-l6"),
RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l5-l6"),
RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-bob"),
+ {}
};
static int rpmh_regulator_probe(struct platform_device *pdev)
--
2.31.1
next prev parent reply other threads:[~2021-06-15 7:49 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 7:45 [PATCH v2 00/10] arm64: dts: qcom: Add SA8155p-adp board DTS Bhupesh Sharma
2021-06-15 7:45 ` [PATCH v2 01/10] dt-bindings: qcom: rpmh-regulator: Add compatible for SA8155p-adp board pmic Bhupesh Sharma
2021-06-24 20:47 ` Rob Herring
2021-06-15 7:45 ` [PATCH v2 02/10] dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for SA8155p-adp Bhupesh Sharma
2021-06-15 21:00 ` Bjorn Andersson
2021-06-16 6:26 ` Bhupesh Sharma
2021-06-15 7:45 ` [PATCH v2 03/10] dt-bindings: arm: qcom: Add compatible for sm8150-mtp board Bhupesh Sharma
2021-06-15 7:45 ` [PATCH v2 04/10] dt-bindings: arm: qcom: Add compatible for SA8155p-adp board Bhupesh Sharma
2021-06-15 7:45 ` Bhupesh Sharma [this message]
2021-06-15 21:06 ` [PATCH v2 05/10] regulator: qcom-rpmh: Cleanup terminator line commas Bjorn Andersson
2021-06-15 7:45 ` [PATCH v2 06/10] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board Bhupesh Sharma
2021-06-15 11:12 ` Mark Brown
2021-06-15 14:38 ` Bhupesh Sharma
2021-06-15 15:35 ` Mark Brown
2021-06-15 21:10 ` Bjorn Andersson
2021-06-15 7:45 ` [PATCH v2 07/10] pinctrl: qcom/pinctrl-spmi-gpio: Add compatible for pmic-gpio on SA8155p-adp Bhupesh Sharma
2021-06-15 21:07 ` Bjorn Andersson
2021-06-15 7:45 ` [PATCH v2 08/10] arm64: dts: qcom: pmm8155au_1: Add base dts file Bhupesh Sharma
2021-06-15 21:08 ` Bjorn Andersson
2021-06-15 7:45 ` [PATCH v2 09/10] arm64: dts: qcom: pmm8155au_2: " Bhupesh Sharma
2021-06-15 21:09 ` Bjorn Andersson
2021-06-15 7:45 ` [PATCH v2 10/10] arm64: dts: qcom: sa8155p-adp: " Bhupesh Sharma
2021-06-15 14:53 ` Konrad Dybcio
2021-06-15 17:00 ` Bhupesh Sharma
2021-06-15 21:13 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210615074543.26700-6-bhupesh.sharma@linaro.org \
--to=bhupesh.sharma@linaro.org \
--cc=agross@kernel.org \
--cc=bhupesh.linux@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).