From: Tony Lindgren <tony@atomide.com>
To: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
afzal mohammed <afzal.mohd.ma@gmail.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Keerthy <j-keerthy@ti.com>, Tero Kristo <kristo@kernel.org>
Subject: [Backport for 5.4.y PATCHv2 1/4] ARM: OMAP: replace setup_irq() by request_irq()
Date: Wed, 16 Jun 2021 15:31:09 +0300 [thread overview]
Message-ID: <20210616123112.65068-1-tony@atomide.com> (raw)
From: afzal mohammed <afzal.mohd.ma@gmail.com>
commit b75ca5217743e4d7076cf65e044e88389e44318d upstream.
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/pm.c | 13 ++++++-------
arch/arm/mach-omap1/time.c | 10 +++-------
arch/arm/mach-omap1/timer32k.c | 10 +++-------
arch/arm/mach-omap2/timer.c | 11 +++--------
4 files changed, 15 insertions(+), 29 deletions(-)
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -596,11 +596,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
return IRQ_HANDLED;
}
-static struct irqaction omap_wakeup_irq = {
- .name = "peripheral wakeup",
- .handler = omap_wakeup_interrupt
-};
-
static const struct platform_suspend_ops omap_pm_ops = {
@@ -613,6 +608,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
static int __init omap_pm_init(void)
{
int error = 0;
+ int irq;
if (!cpu_class_is_omap1())
return -ENODEV;
@@ -656,9 +652,12 @@ static int __init omap_pm_init(void)
arm_pm_idle = omap1_pm_idle;
if (cpu_is_omap7xx())
- setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
+ irq = INT_7XX_WAKE_UP_REQ;
else if (cpu_is_omap16xx())
- setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+ irq = INT_1610_WAKE_UP_REQ;
+ if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
+ NULL))
+ pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
/* Program new power ramp-up time
* (0 for most boards since we don't lower voltage when in deep sleep)
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -155,15 +155,11 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction omap_mpu_timer1_irq = {
- .name = "mpu_timer1",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = omap_mpu_timer1_interrupt,
-};
-
static __init void omap_init_mpu_timer(unsigned long rate)
{
- setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+ if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
+ pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);
omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
clockevent_mpu_timer1.cpumask = cpumask_of(0);
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -148,15 +148,11 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction omap_32k_timer_irq = {
- .name = "32KHz timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = omap_32k_timer_interrupt,
-};
-
static __init void omap_init_32k_timer(void)
{
- setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+ if (request_irq(INT_OS_TIMER, omap_32k_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "32KHz timer", NULL))
+ pr_err("Failed to request irq %d(32KHz timer)\n", INT_OS_TIMER);
clockevent_32k_timer.cpumask = cpumask_of(0);
clockevents_config_and_register(&clockevent_32k_timer,
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -91,12 +91,6 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction omap2_gp_timer_irq = {
- .name = "gp_timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = omap2_gp_timer_interrupt,
-};
-
static int omap2_gp_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
@@ -382,8 +376,9 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
&clockevent_gpt.name, OMAP_TIMER_POSTED);
BUG_ON(res);
- omap2_gp_timer_irq.dev_id = &clkev;
- setup_irq(clkev.irq, &omap2_gp_timer_irq);
+ if (request_irq(clkev.irq, omap2_gp_timer_interrupt,
+ IRQF_TIMER | IRQF_IRQPOLL, "gp_timer", &clkev))
+ pr_err("Failed to request irq %d (gp_timer)\n", clkev.irq);
__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
--
2.31.1
next reply other threads:[~2021-06-16 12:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-16 12:31 Tony Lindgren [this message]
2021-06-16 12:31 ` [Backport for 5.4.y PATCHv2 2/4] clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support Tony Lindgren
2021-06-16 12:31 ` [Backport for 5.4.y PATCHv2 3/4] clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue Tony Lindgren
2021-06-16 12:31 ` [Backport for 5.4.y PATCHv2 4/4] clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940 Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210616123112.65068-1-tony@atomide.com \
--to=tony@atomide.com \
--cc=afzal.mohd.ma@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=j-keerthy@ti.com \
--cc=kristo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).