linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Hans de Goede <hdegoede@redhat.com>,
	Mario Limonciello <mario.limonciello@amd.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Daniel Scally <djrscally@gmail.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	linux-kernel@vger.kernel.org,
	platform-driver-x86@vger.kernel.org
Cc: Mark Gross <mgross@linux.intel.com>
Subject: [PATCH v2 8/8] platform/x86: intel_cht_int33fe: Move to its own subfolder
Date: Fri, 18 Jun 2021 15:55:16 +0300	[thread overview]
Message-ID: <20210618125516.53510-8-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20210618125516.53510-1-andriy.shevchenko@linux.intel.com>

Since we have started collecting Intel x86 specific drivers in its own folder,
Move intel_cht_int33fe to own subfolder there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: no changes
 drivers/platform/x86/Kconfig                  | 24 ------------------
 drivers/platform/x86/Makefile                 |  4 ---
 drivers/platform/x86/intel/Kconfig            |  1 +
 drivers/platform/x86/intel/Makefile           |  1 +
 drivers/platform/x86/intel/int33fe/Kconfig    | 25 +++++++++++++++++++
 drivers/platform/x86/intel/int33fe/Makefile   |  5 ++++
 .../int33fe}/intel_cht_int33fe_common.c       |  0
 .../int33fe}/intel_cht_int33fe_common.h       |  0
 .../int33fe}/intel_cht_int33fe_microb.c       |  0
 .../int33fe}/intel_cht_int33fe_typec.c        |  0
 10 files changed, 32 insertions(+), 28 deletions(-)
 create mode 100644 drivers/platform/x86/intel/int33fe/Kconfig
 create mode 100644 drivers/platform/x86/intel/int33fe/Makefile
 rename drivers/platform/x86/{ => intel/int33fe}/intel_cht_int33fe_common.c (100%)
 rename drivers/platform/x86/{ => intel/int33fe}/intel_cht_int33fe_common.h (100%)
 rename drivers/platform/x86/{ => intel/int33fe}/intel_cht_int33fe_microb.c (100%)
 rename drivers/platform/x86/{ => intel/int33fe}/intel_cht_int33fe_typec.c (100%)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 79d095c0ab61..7d385c3b2239 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -687,30 +687,6 @@ config INTEL_ATOMISP2_PM
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel_atomisp2_pm.
 
-config INTEL_CHT_INT33FE
-	tristate "Intel Cherry Trail ACPI INT33FE Driver"
-	depends on X86 && ACPI && I2C && REGULATOR
-	depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
-	depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m)
-	depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m)
-	help
-	  This driver add support for the INT33FE ACPI device found on
-	  some Intel Cherry Trail devices.
-
-	  There are two kinds of INT33FE ACPI device possible: for hardware
-	  with USB Type-C and Micro-B connectors. This driver supports both.
-
-	  The INT33FE ACPI device has a CRS table with I2cSerialBusV2
-	  resources for Fuel Gauge Controller and (in the Type-C variant)
-	  FUSB302 USB Type-C Controller and PI3USB30532 USB switch.
-	  This driver instantiates i2c-clients for these, so that standard
-	  i2c drivers for these chips can bind to the them.
-
-	  If you enable this driver it is advised to also select
-	  CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B
-	  device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m
-	  for Type-C device.
-
 config INTEL_HID_EVENT
 	tristate "INTEL HID Event"
 	depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e03b59ce3f9f..7ee369aab10d 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -70,10 +70,6 @@ obj-$(CONFIG_X86_PLATFORM_DRIVERS_INTEL)		+= intel/
 
 obj-$(CONFIG_INTEL_ATOMISP2_LED)	+= intel_atomisp2_led.o
 obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= intel_atomisp2_pm.o
-obj-$(CONFIG_INTEL_CHT_INT33FE)		+= intel_cht_int33fe.o
-intel_cht_int33fe-objs			:= intel_cht_int33fe_common.o \
-					   intel_cht_int33fe_typec.o \
-					   intel_cht_int33fe_microb.o
 obj-$(CONFIG_INTEL_HID_EVENT)		+= intel-hid.o
 obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
 obj-$(CONFIG_INTEL_MENLOW)		+= intel_menlow.o
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 33f2dab03d3d..f2eef337eb98 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -16,6 +16,7 @@ menuconfig X86_PLATFORM_DRIVERS_INTEL
 
 if X86_PLATFORM_DRIVERS_INTEL
 
+source "drivers/platform/x86/intel/int33fe/Kconfig"
 source "drivers/platform/x86/intel/int3472/Kconfig"
 
 endif # X86_PLATFORM_DRIVERS_INTEL
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index 3ac795d810f1..0653055942d5 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -4,4 +4,5 @@
 # Intel x86 Platform-Specific Drivers
 #
 
+obj-$(CONFIG_INTEL_CHT_INT33FE)		+= int33fe/
 obj-$(CONFIG_INTEL_SKL_INT3472)		+= int3472/
diff --git a/drivers/platform/x86/intel/int33fe/Kconfig b/drivers/platform/x86/intel/int33fe/Kconfig
new file mode 100644
index 000000000000..c7efb461d97d
--- /dev/null
+++ b/drivers/platform/x86/intel/int33fe/Kconfig
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config INTEL_CHT_INT33FE
+	tristate "Intel Cherry Trail ACPI INT33FE Driver"
+	depends on X86 && ACPI && I2C && REGULATOR
+	depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
+	depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m)
+	depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m)
+	help
+	  This driver add support for the INT33FE ACPI device found on
+	  some Intel Cherry Trail devices.
+
+	  There are two kinds of INT33FE ACPI device possible: for hardware
+	  with USB Type-C and Micro-B connectors. This driver supports both.
+
+	  The INT33FE ACPI device has a CRS table with I2cSerialBusV2
+	  resources for Fuel Gauge Controller and (in the Type-C variant)
+	  FUSB302 USB Type-C Controller and PI3USB30532 USB switch.
+	  This driver instantiates i2c-clients for these, so that standard
+	  i2c drivers for these chips can bind to the them.
+
+	  If you enable this driver it is advised to also select
+	  CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B
+	  device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m
+	  for Type-C device.
+
diff --git a/drivers/platform/x86/intel/int33fe/Makefile b/drivers/platform/x86/intel/int33fe/Makefile
new file mode 100644
index 000000000000..cc11183ce179
--- /dev/null
+++ b/drivers/platform/x86/intel/int33fe/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_INTEL_CHT_INT33FE)		+= intel_cht_int33fe.o
+intel_cht_int33fe-objs			:= intel_cht_int33fe_common.o \
+					   intel_cht_int33fe_typec.o \
+					   intel_cht_int33fe_microb.o
diff --git a/drivers/platform/x86/intel_cht_int33fe_common.c b/drivers/platform/x86/intel/int33fe/intel_cht_int33fe_common.c
similarity index 100%
rename from drivers/platform/x86/intel_cht_int33fe_common.c
rename to drivers/platform/x86/intel/int33fe/intel_cht_int33fe_common.c
diff --git a/drivers/platform/x86/intel_cht_int33fe_common.h b/drivers/platform/x86/intel/int33fe/intel_cht_int33fe_common.h
similarity index 100%
rename from drivers/platform/x86/intel_cht_int33fe_common.h
rename to drivers/platform/x86/intel/int33fe/intel_cht_int33fe_common.h
diff --git a/drivers/platform/x86/intel_cht_int33fe_microb.c b/drivers/platform/x86/intel/int33fe/intel_cht_int33fe_microb.c
similarity index 100%
rename from drivers/platform/x86/intel_cht_int33fe_microb.c
rename to drivers/platform/x86/intel/int33fe/intel_cht_int33fe_microb.c
diff --git a/drivers/platform/x86/intel_cht_int33fe_typec.c b/drivers/platform/x86/intel/int33fe/intel_cht_int33fe_typec.c
similarity index 100%
rename from drivers/platform/x86/intel_cht_int33fe_typec.c
rename to drivers/platform/x86/intel/int33fe/intel_cht_int33fe_typec.c
-- 
2.30.2


  parent reply	other threads:[~2021-06-18 12:55 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-18 12:55 [PATCH v2 1/8] platform/x86: Remove "default n" entries Andy Shevchenko
2021-06-18 12:55 ` [PATCH v2 2/8] platform/x86: intel_skl_int3472: Free ACPI device resources after use Andy Shevchenko
2021-06-21 22:32   ` Daniel Scally
2021-06-18 12:55 ` [PATCH v2 3/8] platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP) Andy Shevchenko
2021-06-18 12:55 ` [PATCH v2 4/8] platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly Andy Shevchenko
2021-06-21 22:37   ` Daniel Scally
2021-06-18 12:55 ` [PATCH v2 5/8] platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator() Andy Shevchenko
2021-06-21 22:40   ` Daniel Scally
2021-06-18 12:55 ` [PATCH v2 6/8] platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock() Andy Shevchenko
2021-06-18 12:55 ` [PATCH v2 7/8] platform/x86: intel_skl_int3472: Move to intel/ subfolder Andy Shevchenko
2021-06-18 12:55 ` Andy Shevchenko [this message]
2021-06-22  9:02 ` [PATCH v2 1/8] platform/x86: Remove "default n" entries Andy Shevchenko
2021-06-22  9:03   ` Hans de Goede
2021-06-22  9:42 ` Hans de Goede
2021-06-22  9:46   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210618125516.53510-8-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=djrscally@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=mgross@linux.intel.com \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).