From: Dmitry Osipenko <digetx@gmail.com>
To: Jean Delvare <jdelvare@suse.com>, Guenter Roeck <linux@roeck-us.net>
Cc: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-tegra@vger.kernel.org
Subject: [PATCH v3 2/4] hwmon: (lm90) Use hwmon_notify_event()
Date: Sat, 19 Jun 2021 00:54:53 +0300 [thread overview]
Message-ID: <20210618215455.19986-3-digetx@gmail.com> (raw)
In-Reply-To: <20210618215455.19986-1-digetx@gmail.com>
Use hwmon_notify_event() to notify userspace and thermal core about
temperature changes.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/hwmon/lm90.c | 44 +++++++++++++++++++++++++++++++++-----------
1 file changed, 33 insertions(+), 11 deletions(-)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 2e057fad05b4..e7b678a40b39 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -465,6 +465,7 @@ enum lm90_temp11_reg_index {
struct lm90_data {
struct i2c_client *client;
+ struct device *hwmon_dev;
u32 channel_config[4];
struct hwmon_channel_info temp_info;
const struct hwmon_channel_info *info[3];
@@ -1731,22 +1732,41 @@ static bool lm90_is_tripped(struct i2c_client *client, u16 *status)
if ((st & (LM90_STATUS_LLOW | LM90_STATUS_LHIGH | LM90_STATUS_LTHRM)) ||
(st2 & MAX6696_STATUS2_LOT2))
- dev_warn(&client->dev,
- "temp%d out of range, please check!\n", 1);
+ dev_dbg(&client->dev,
+ "temp%d out of range, please check!\n", 1);
if ((st & (LM90_STATUS_RLOW | LM90_STATUS_RHIGH | LM90_STATUS_RTHRM)) ||
(st2 & MAX6696_STATUS2_ROT2))
- dev_warn(&client->dev,
- "temp%d out of range, please check!\n", 2);
+ dev_dbg(&client->dev,
+ "temp%d out of range, please check!\n", 2);
if (st & LM90_STATUS_ROPEN)
- dev_warn(&client->dev,
- "temp%d diode open, please check!\n", 2);
+ dev_dbg(&client->dev,
+ "temp%d diode open, please check!\n", 2);
if (st2 & (MAX6696_STATUS2_R2LOW | MAX6696_STATUS2_R2HIGH |
MAX6696_STATUS2_R2THRM | MAX6696_STATUS2_R2OT2))
- dev_warn(&client->dev,
- "temp%d out of range, please check!\n", 3);
+ dev_dbg(&client->dev,
+ "temp%d out of range, please check!\n", 3);
if (st2 & MAX6696_STATUS2_R2OPEN)
- dev_warn(&client->dev,
- "temp%d diode open, please check!\n", 3);
+ dev_dbg(&client->dev,
+ "temp%d diode open, please check!\n", 3);
+
+ if (st & LM90_STATUS_LLOW)
+ hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+ hwmon_temp_min, 0);
+ if (st & LM90_STATUS_RLOW)
+ hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+ hwmon_temp_min, 1);
+ if (st2 & MAX6696_STATUS2_R2LOW)
+ hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+ hwmon_temp_min, 2);
+ if (st & LM90_STATUS_LHIGH)
+ hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+ hwmon_temp_max, 0);
+ if (st & LM90_STATUS_RHIGH)
+ hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+ hwmon_temp_max, 1);
+ if (st2 & MAX6696_STATUS2_R2HIGH)
+ hwmon_notify_event(data->hwmon_dev, hwmon_temp,
+ hwmon_temp_max, 2);
return true;
}
@@ -1904,6 +1924,8 @@ static int lm90_probe(struct i2c_client *client)
if (IS_ERR(hwmon_dev))
return PTR_ERR(hwmon_dev);
+ data->hwmon_dev = hwmon_dev;
+
if (client->irq) {
dev_dbg(dev, "IRQ: %d\n", client->irq);
err = devm_request_threaded_irq(dev, client->irq,
@@ -1940,7 +1962,7 @@ static void lm90_alert(struct i2c_client *client, enum i2c_alert_protocol type,
lm90_update_confreg(data, data->config | 0x80);
}
} else {
- dev_info(&client->dev, "Everything OK\n");
+ dev_dbg(&client->dev, "Everything OK\n");
}
}
--
2.30.2
next prev parent reply other threads:[~2021-06-18 21:55 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-18 21:54 [PATCH v3 0/4] HWMON LM90 interrupt fixes and improvements Dmitry Osipenko
2021-06-18 21:54 ` [PATCH v3 1/4] hwmon: (lm90) Don't override interrupt trigger type Dmitry Osipenko
2021-06-18 21:54 ` Dmitry Osipenko [this message]
2022-02-21 12:01 ` [PATCH v3 2/4] hwmon: (lm90) Use hwmon_notify_event() Jon Hunter
2022-02-21 12:36 ` Dmitry Osipenko
2022-02-21 12:56 ` Jon Hunter
2022-02-21 12:59 ` Dmitry Osipenko
2022-02-21 13:50 ` Jon Hunter
2022-02-21 13:59 ` Dmitry Osipenko
2022-02-21 15:25 ` Guenter Roeck
2022-02-21 15:43 ` Guenter Roeck
2022-02-21 15:49 ` Jon Hunter
2022-02-21 16:02 ` Guenter Roeck
2022-02-21 16:13 ` Dmitry Osipenko
2022-02-21 16:16 ` Jon Hunter
2022-02-21 16:20 ` Dmitry Osipenko
2022-02-21 16:42 ` Guenter Roeck
2022-02-21 16:22 ` Jon Hunter
2022-02-21 18:38 ` Guenter Roeck
2022-02-21 16:23 ` Guenter Roeck
2021-06-18 21:54 ` [PATCH v3 3/4] hwmon: (lm90) Unmask hardware interrupt Dmitry Osipenko
2021-06-18 21:54 ` [PATCH v3 4/4] hwmon: (lm90) Disable interrupt on suspend Dmitry Osipenko
2021-06-19 11:10 ` [PATCH v3 0/4] HWMON LM90 interrupt fixes and improvements Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210618215455.19986-3-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).