From: Fabio Aiuto <fabioaiuto83@gmail.com>
To: gregkh@linuxfoundation.org
Cc: hdegoede@redhat.com, Larry.Finger@lwfinger.net,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH 17/18] staging: rtl8723bs: fix check allowing 5Ghz settings
Date: Sat, 19 Jun 2021 12:47:20 +0200 [thread overview]
Message-ID: <76a466525997ca006707bc2115705995892d420e.1624099126.git.fabioaiuto83@gmail.com> (raw)
In-Reply-To: <cover.1624099125.git.fabioaiuto83@gmail.com>
fix check allowing 5Ghz settings, only disabled and
2.4Ghz enabled states are allowed. Fix comment
accordingly.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
---
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
index afefc2c8a2ac..e73fb13f8968 100644
--- a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
@@ -2572,10 +2572,9 @@ static int rtw_dbg_port(struct net_device *dev,
case 0x12: /* set rx_stbc */
{
struct registry_priv *pregpriv = &padapter->registrypriv;
- /* 0: disable, bit(0):enable 2.4g, bit(1):enable 5g, 0x3: enable both 2.4g and 5g */
- /* default is set to enable 2.4GHZ for IOT issue with bufflao's AP at 5GHZ */
- if (extra_arg == 0 || extra_arg == 1 ||
- extra_arg == 2 || extra_arg == 3)
+ /* 0: disable, bit(0):enable 2.4g */
+ /* default is set to enable 2.4GHZ */
+ if (extra_arg == 0 || extra_arg == 1)
pregpriv->rx_stbc = extra_arg;
}
break;
--
2.20.1
next prev parent reply other threads:[~2021-06-19 10:49 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-19 10:47 [PATCH 00/18] staging: rtl8723bs: remove 5Ghz code Fabio Aiuto
2021-06-19 10:47 ` [PATCH 01/18] staging: rtl8723bs: remove all 5Ghz network types Fabio Aiuto
2021-06-21 9:40 ` Hans de Goede
2021-06-21 11:23 ` Fabio Aiuto
2021-06-19 10:47 ` [PATCH 02/18] staging: rtl8723bs: remove code related to unsupported channel bandwidth Fabio Aiuto
2021-06-19 10:47 ` [PATCH 03/18] staging: rtl8723bs: remove unused enum items related to channel bonding Fabio Aiuto
2021-06-19 10:47 ` [PATCH 04/18] staging: rtl8723bs: rename " Fabio Aiuto
2021-06-19 10:47 ` [PATCH 05/18] staging: rtl8723bs: remove 5Ghz field in struct registry_priv Fabio Aiuto
2021-06-19 10:47 ` [PATCH 06/18] staging: rtl8723bs: remove struct rt_channel_plan_5g Fabio Aiuto
2021-06-19 10:47 ` [PATCH 07/18] staging: rtl8723bs: remove all branchings between 2.4Ghz and 5Ghz band types Fabio Aiuto
2021-06-19 10:47 ` [PATCH 08/18] staging: rtl8723bs: beautify prototypes in include/hal_com_phycfg.h Fabio Aiuto
2021-06-19 10:47 ` [PATCH 09/18] staging: rtl8723bs: remove 5Ghz code related to channel plan definition Fabio Aiuto
2021-06-19 10:47 ` [PATCH 10/18] staging: rtl8723bs: remove some unused 5Ghz macro definitions Fabio Aiuto
2021-06-19 10:47 ` [PATCH 11/18] staging: rtl8723bs: remove 5Ghz code related to RF power calibration Fabio Aiuto
2021-06-19 10:47 ` [PATCH 12/18] staging: rtl8723bs: remove VHT dead code Fabio Aiuto
2021-06-21 9:45 ` Hans de Goede
2021-06-21 12:41 ` Fabio Aiuto
2021-06-21 12:45 ` Hans de Goede
2021-06-21 12:51 ` Fabio Aiuto
2021-06-22 9:16 ` Fabio Aiuto
2021-06-22 9:19 ` Hans de Goede
2021-06-22 9:57 ` Fabio Aiuto
2021-06-22 11:15 ` Hans de Goede
2021-06-19 10:47 ` [PATCH 13/18] staging: rtl8723bs: remove unused ODM_CMNINFO_BOARD_TYPE enum item Fabio Aiuto
2021-06-19 10:47 ` [PATCH 14/18] staging: rtl8723bs: fix macro value for 2.4Ghz only device Fabio Aiuto
2021-06-19 10:47 ` [PATCH 15/18] staging: rtl8723bs: remove register initializations tied to 802.11ac standard Fabio Aiuto
2021-06-21 9:48 ` Hans de Goede
2021-06-21 12:45 ` Fabio Aiuto
2021-06-19 10:47 ` [PATCH 16/18] staging: rtl8723bs: remove obsolete 5Ghz comments Fabio Aiuto
2021-06-19 10:47 ` Fabio Aiuto [this message]
2021-06-19 10:47 ` [PATCH 18/18] staging: rtl8723bs: remove item from TODO list Fabio Aiuto
2021-06-21 9:49 ` [PATCH 00/18] staging: rtl8723bs: remove 5Ghz code Hans de Goede
2021-06-21 12:47 ` Fabio Aiuto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=76a466525997ca006707bc2115705995892d420e.1624099126.git.fabioaiuto83@gmail.com \
--to=fabioaiuto83@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).