[PATCH v5 02/10] drm/vc4: hdmi: Fix HPD GPIO detection

From: Maxime Ripard <maxime@cerno.tech>
To: Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>,
	dri-devel@lists.freedesktop.org,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Phil Elwell <phil@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Dom Cobley <dom@raspberrypi.com>,
	linux-rpi-kernel@lists.infradead.org,
	Maxime Ripard <mripard@kernel.org>, Emma Anholt <emma@anholt.net>,
	bcm-kernel-feedback-list@broadcom.com,
	Nicolas Saenz Julienne <nsaenz@kernel.org>,
	Eric Anholt <eric@anholt.net>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v5 02/10] drm/vc4: hdmi: Fix HPD GPIO detection
Date: Mon, 28 Jun 2021 14:42:49 +0200	[thread overview]
Message-ID: <20210628124257.140453-3-maxime@cerno.tech> (raw)
In-Reply-To: <20210628124257.140453-1-maxime@cerno.tech>

Prior to commit 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod"), in the
detect hook, if we had an HPD GPIO we would only rely on it and return
whatever state it was in.

However, that commit changed that by mistake to only consider the case
where we have a GPIO and it returns a logical high, and would fall back
to the other methods otherwise.

Since we can read the EDIDs when the HPD signal is low on some displays,
we changed the detection status from disconnected to connected, and we
would ignore an HPD pulse.

Fixes: 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index b8b371abf3d7..e7fdda8a1bfa 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -167,9 +167,9 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
 	struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
 	bool connected = false;
 
-	if (vc4_hdmi->hpd_gpio &&
-	    gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) {
-		connected = true;
+	if (vc4_hdmi->hpd_gpio) {
+		if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))
+			connected = true;
 	} else if (HDMI_READ(HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED) {
 		connected = true;
 	}
-- 
2.31.1

