From: Tony Lindgren <tony@atomide.com>
To: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Keerthy <j-keerthy@ti.com>, Tero Kristo <kristo@kernel.org>
Subject: [Backport for 4.19.y PATCH 4/4] clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
Date: Fri, 9 Jul 2021 10:37:45 +0300 [thread overview]
Message-ID: <20210709073745.13916-4-tony@atomide.com> (raw)
In-Reply-To: <20210709073745.13916-1-tony@atomide.com>
commit 25de4ce5ed02994aea8bc111d133308f6fd62566 upstream.
There is a timer wrap issue on dra7 for the ARM architected timer.
In a typical clock configuration the timer fails to wrap after 388 days.
To work around the issue, we need to use timer-ti-dm percpu timers instead.
Let's configure dmtimer3 and 4 as percpu timers by default, and warn about
the issue if the dtb is not configured properly.
For more information, please see the errata for "AM572x Sitara Processors
Silicon Revisions 1.1, 2.0":
https://www.ti.com/lit/er/sprz429m/sprz429m.pdf
The concept is based on earlier reference patches done by Tero Kristo and
Keerthy.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
[tony@atomide.com: backported to 4.19.y]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/dra7.dtsi | 11 ++++++
arch/arm/mach-omap2/board-generic.c | 4 +--
arch/arm/mach-omap2/timer.c | 53 ++++++++++++++++++++++++++++-
drivers/clk/ti/clk-7xx.c | 1 +
include/linux/cpuhotplug.h | 1 +
5 files changed, 67 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -48,6 +48,7 @@
timer {
compatible = "arm,armv7-timer";
+ status = "disabled"; /* See ARM architected timer wrap erratum i940 */
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -910,6 +911,8 @@
reg = <0x48032000 0x80>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer2";
+ clock-names = "fck";
+ clocks = <&l4per_clkctrl DRA7_TIMER2_CLKCTRL 24>;
};
timer3: timer@48034000 {
@@ -917,6 +920,10 @@
reg = <0x48034000 0x80>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer3";
+ clock-names = "fck";
+ clocks = <&l4per_clkctrl DRA7_TIMER3_CLKCTRL 24>;
+ assigned-clocks = <&l4per_clkctrl DRA7_TIMER3_CLKCTRL 24>;
+ assigned-clock-parents = <&timer_sys_clk_div>;
};
timer4: timer@48036000 {
@@ -924,6 +931,10 @@
reg = <0x48036000 0x80>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer4";
+ clock-names = "fck";
+ clocks = <&l4per_clkctrl DRA7_TIMER4_CLKCTRL 24>;
+ assigned-clocks = <&l4per_clkctrl DRA7_TIMER4_CLKCTRL 24>;
+ assigned-clock-parents = <&timer_sys_clk_div>;
};
timer5: timer@48820000 {
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -330,7 +330,7 @@ DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
.init_late = dra7xx_init_late,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
- .init_time = omap5_realtime_timer_init,
+ .init_time = omap3_gptimer_timer_init,
.dt_compat = dra74x_boards_compat,
.restart = omap44xx_restart,
MACHINE_END
@@ -353,7 +353,7 @@ DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
.init_late = dra7xx_init_late,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
- .init_time = omap5_realtime_timer_init,
+ .init_time = omap3_gptimer_timer_init,
.dt_compat = dra72x_boards_compat,
.restart = omap44xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -42,6 +42,7 @@
#include <linux/platform_device.h>
#include <linux/platform_data/dmtimer-omap.h>
#include <linux/sched_clock.h>
+#include <linux/cpu.h>
#include <asm/mach/time.h>
#include <asm/smp_twd.h>
@@ -421,6 +422,53 @@ static void __init dmtimer_clkevt_init_common(struct dmtimer_clockevent *clkevt,
timer->rate);
}
+static DEFINE_PER_CPU(struct dmtimer_clockevent, dmtimer_percpu_timer);
+
+static int omap_gptimer_starting_cpu(unsigned int cpu)
+{
+ struct dmtimer_clockevent *clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+ struct clock_event_device *dev = &clkevt->dev;
+ struct omap_dm_timer *timer = &clkevt->timer;
+
+ clockevents_config_and_register(dev, timer->rate, 3, ULONG_MAX);
+ irq_force_affinity(dev->irq, cpumask_of(cpu));
+
+ return 0;
+}
+
+static int __init dmtimer_percpu_quirk_init(void)
+{
+ struct dmtimer_clockevent *clkevt;
+ struct clock_event_device *dev;
+ struct device_node *arm_timer;
+ struct omap_dm_timer *timer;
+ int cpu = 0;
+
+ arm_timer = of_find_compatible_node(NULL, NULL, "arm,armv7-timer");
+ if (of_device_is_available(arm_timer)) {
+ pr_warn_once("ARM architected timer wrap issue i940 detected\n");
+ return 0;
+ }
+
+ for_each_possible_cpu(cpu) {
+ clkevt = per_cpu_ptr(&dmtimer_percpu_timer, cpu);
+ dev = &clkevt->dev;
+ timer = &clkevt->timer;
+
+ dmtimer_clkevt_init_common(clkevt, 0, "timer_sys_ck",
+ CLOCK_EVT_FEAT_ONESHOT,
+ cpumask_of(cpu),
+ "assigned-clock-parents",
+ 500, "percpu timer");
+ }
+
+ cpuhp_setup_state(CPUHP_AP_OMAP_DM_TIMER_STARTING,
+ "clockevents/omap/gptimer:starting",
+ omap_gptimer_starting_cpu, NULL);
+
+ return 0;
+}
+
/* Clocksource code */
static struct omap_dm_timer clksrc;
static bool use_gptimer_clksrc __initdata;
@@ -565,6 +613,9 @@ static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src
3, /* Timer internal resynch latency */
0xffffffff);
+ if (soc_is_dra7xx())
+ dmtimer_percpu_quirk_init();
+
/* Enable the use of clocksource="gp_timer" kernel parameter */
if (use_gptimer_clksrc || gptimer)
omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src,
@@ -592,7 +643,7 @@ void __init omap3_secure_sync32k_timer_init(void)
#endif /* CONFIG_ARCH_OMAP3 */
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
- defined(CONFIG_SOC_AM43XX)
+ defined(CONFIG_SOC_AM43XX) || defined(CONFIG_SOC_DRA7XX)
void __init omap3_gptimer_timer_init(void)
{
__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -733,6 +733,7 @@ const struct omap_clkctrl_data dra7_clkctrl_data[] __initconst = {
static struct ti_dt_clk dra7xx_clks[] = {
DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
DT_CLK(NULL, "sys_clkin_ck", "timer_sys_clk_div"),
+ DT_CLK(NULL, "timer_sys_ck", "timer_sys_clk_div"),
DT_CLK(NULL, "sys_clkin", "sys_clkin1"),
DT_CLK(NULL, "atl_dpll_clk_mux", "atl_cm:0000:24"),
DT_CLK(NULL, "atl_gfclk_mux", "atl_cm:0000:26"),
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -118,6 +118,7 @@ enum cpuhp_state {
CPUHP_AP_ARM_L2X0_STARTING,
CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
CPUHP_AP_ARM_ARCH_TIMER_STARTING,
+ CPUHP_AP_OMAP_DM_TIMER_STARTING,
CPUHP_AP_ARM_GLOBAL_TIMER_STARTING,
CPUHP_AP_JCORE_TIMER_STARTING,
CPUHP_AP_ARM_TWD_STARTING,
--
2.32.0
next prev parent reply other threads:[~2021-07-09 7:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-09 7:37 [Backport for 4.19.y PATCH 1/4] ARM: OMAP: replace setup_irq() by request_irq() Tony Lindgren
2021-07-09 7:37 ` [Backport for 4.19.y PATCH 2/4] clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support Tony Lindgren
2021-07-09 7:37 ` [Backport for 4.19.y PATCH 3/4] clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue Tony Lindgren
2021-07-09 7:37 ` Tony Lindgren [this message]
2021-07-09 13:08 ` [Backport for 4.19.y PATCH 1/4] ARM: OMAP: replace setup_irq() by request_irq() Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210709073745.13916-4-tony@atomide.com \
--to=tony@atomide.com \
--cc=daniel.lezcano@linaro.org \
--cc=j-keerthy@ti.com \
--cc=kristo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).