From: Yassine Oudjana <y.oudjana@protonmail.com>
To: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org
Cc: Yassine Oudjana <y.oudjana@protonmail.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Ohad Ben-Cohen <ohad@wizery.com>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
"Dr. Git" <drgitx@gmail.com>, Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 5/5] arm64: dts: qcom: msm8996: Add SLPI PIL
Date: Fri, 09 Jul 2021 17:03:34 +0000 [thread overview]
Message-ID: <Kkl8iDciL84dIO3pxBJycNYGjkvZQkVTj3YKjPg8I@cp4-web-032.plabs.ch> (raw)
Add a node for the SLPI peripheral image loader.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 39 +++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index bb6bfd24256f..1f4125ef5512 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1285,6 +1285,45 @@ lpass_q6_smmu: iommu@1600000 {
clock-names = "iface", "bus";
};
+ slpi_pil: remoteproc@1c00000 {
+ compatible = "qcom,msm8996-slpi-pil";
+ reg = <0x01c00000 0x4000>;
+
+ interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&xo_board>,
+ <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ clock-names = "xo", "aggre2";
+
+ memory-region = <&slpi_mem>;
+
+ qcom,smem-states = <&slpi_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ power-domains = <&rpmpd MSM8996_VDDSSCX>;
+ power-domain-names = "ssc_cx";
+
+ status = "disabled";
+
+ smd-edge {
+ interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+
+ label = "dsps";
+ mboxes = <&apcs_glb 25>;
+ qcom,smd-edge = <3>;
+ qcom,remote-pid = <3>;
+ };
+ };
+
mss_pil: remoteproc@2080000 {
compatible = "qcom,msm8996-mss-pil";
--
2.32.0
reply other threads:[~2021-07-09 17:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Kkl8iDciL84dIO3pxBJycNYGjkvZQkVTj3YKjPg8I@cp4-web-032.plabs.ch \
--to=y.oudjana@protonmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=drgitx@gmail.com \
--cc=konrad.dybcio@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mathieu.poirier@linaro.org \
--cc=ohad@wizery.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).