From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Maxime Ripard <mripard@kernel.org>,
Chen-Yu Tsai <wens@csie.org>,
Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>,
Rui Miguel Silva <rmfrfs@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Mark Brown <broonie@kernel.org>,
Robert Marko <robert.marko@sartura.hr>,
Philipp Zabel <p.zabel@pengutronix.de>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ramesh Shanmugasundaram <rashanmu@gmail.com>,
"G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>,
Linus Walleij <linus.walleij@linaro.org>,
Oleksij Rempel <o.rempel@pengutronix.de>,
ChiYuan Huang <cy_huang@richtek.com>,
Wei Xu <xuwei5@hisilicon.com>,
Dilip Kota <eswara.kota@linux.intel.com>,
Karol Gugala <kgugala@antmicro.com>,
Mateusz Holenko <mholenko@antmicro.com>,
Olivier Moysan <olivier.moysan@st.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
dri-devel@lists.freedesktop.org, linux-media@vger.kernel.org,
netdev@vger.kernel.org, linux-rtc@vger.kernel.org,
alsa-devel@alsa-project.org
Subject: [PATCH] dt-bindings: Remove "status" from schema examples
Date: Tue, 20 Jul 2021 11:20:25 -0600 [thread overview]
Message-ID: <20210720172025.363238-1-robh@kernel.org> (raw)
There's no reason to have "status" properties in examples. "okay" is the
default, and "disabled" turns off some schema checks ('required'
specifically).
Enabling qca,ar71xx causes a warning, so let's fix the node names:
Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
From schema: schemas/phy/phy-provider.yaml
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Robert Marko <robert.marko@sartura.hr>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: ChiYuan Huang <cy_huang@richtek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Dilip Kota <eswara.kota@linux.intel.com>
Cc: Karol Gugala <kgugala@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
.../display/panel/boe,tv101wum-nl6.yaml | 1 -
.../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
.../bindings/media/renesas,drif.yaml | 1 -
.../bindings/net/intel,dwmac-plat.yaml | 2 --
.../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
.../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
.../regulator/richtek,rt6245-regulator.yaml | 1 -
.../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
.../reset/hisilicon,hi3660-reset.yaml | 1 -
.../bindings/reset/intel,rcu-gw.yaml | 1 -
.../bindings/rtc/microcrystal,rv3032.yaml | 1 -
.../soc/litex/litex,soc-controller.yaml | 1 -
.../bindings/sound/st,stm32-sai.yaml | 2 --
.../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
.../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
17 files changed, 5 insertions(+), 45 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 5d42d36608d9..4951b5ef5c6a 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -174,7 +174,6 @@ examples:
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
- status = "disabled";
ports {
#address-cells = <1>;
@@ -233,7 +232,6 @@ examples:
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
- status = "disabled";
ports {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index 38bc1d1b511e..b87a2e28c866 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -70,7 +70,6 @@ examples:
avee-supply = <&ppvarp_lcd>;
pp1800-supply = <&pp1800_lcd>;
backlight = <&backlight_lcd0>;
- status = "okay";
port {
panel_in: endpoint {
remote-endpoint = <&dsi_out>;
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 7c09eec78ce5..877183cf4278 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -200,8 +200,6 @@ examples:
clock-names = "pclk", "wrap", "phy", "axi";
power-domains = <&mipi_pd>;
- status = "disabled";
-
ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index 2867d11fe156..9403b235e976 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -242,7 +242,6 @@ examples:
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 513>;
renesas,bonding = <&drif11>;
- status = "disabled";
};
drif11: rif@e6f70000 {
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index c1948ce00081..79fa04f5e40d 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -116,8 +116,6 @@ examples:
snps,mtl-rx-config = <&mtl_rx_setup>;
snps,mtl-tx-config = <&mtl_tx_setup>;
snps,tso;
- status = "okay";
-
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
index f2e91d1bf7d7..378ed2d3b003 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -71,7 +71,6 @@ examples:
ethernet@c8009000 {
compatible = "intel,ixp4xx-ethernet";
reg = <0xc8009000 0x1000>;
- status = "disabled";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
intel,npe-handle = <&npe 1>;
@@ -82,7 +81,6 @@ examples:
ethernet@c800c000 {
compatible = "intel,ixp4xx-ethernet";
reg = <0xc800c000 0x1000>;
- status = "disabled";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
intel,npe-handle = <&npe 2>;
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index 081742c2b726..64995cbb0f97 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -90,14 +90,11 @@ examples:
# UART example on Raspberry Pi
- |
uart0 {
- status = "okay";
-
nfc {
compatible = "samsung,s3fwrn82";
en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
index f0db22645d73..cf4d35edaa1b 100644
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -101,8 +101,6 @@ examples:
phy-mode = "gmii";
- status = "disabled";
-
fixed-link {
speed = <1000>;
full-duplex;
@@ -148,32 +146,24 @@ examples:
reg = <0x1>;
phy-handle = <&phy_port0>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port2: port@2 {
reg = <0x2>;
phy-handle = <&phy_port1>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port3: port@3 {
reg = <0x3>;
phy-handle = <&phy_port2>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port4: port@4 {
reg = <0x4>;
phy-handle = <&phy_port3>;
phy-mode = "internal";
-
- status = "disabled";
};
};
@@ -183,34 +173,29 @@ examples:
interrupt-parent = <&switch10>;
- phy_port0: phy@0 {
+ phy_port0: ethernet-phy@0 {
reg = <0x0>;
interrupts = <0>;
- status = "disabled";
};
- phy_port1: phy@1 {
+ phy_port1: ethernet-phy@1 {
reg = <0x1>;
interrupts = <0>;
- status = "disabled";
};
- phy_port2: phy@2 {
+ phy_port2: ethernet-phy@2 {
reg = <0x2>;
interrupts = <0>;
- status = "disabled";
};
- phy_port3: phy@3 {
+ phy_port3: ethernet-phy@3 {
reg = <0x3>;
interrupts = <0>;
- status = "disabled";
};
- phy_port4: phy@4 {
+ phy_port4: ethernet-phy@4 {
reg = <0x4>;
interrupts = <0>;
- status = "disabled";
};
};
};
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
index 796ceac87445..e983d0e70c9b 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -77,7 +77,6 @@ examples:
rt6245@34 {
compatible = "richtek,rt6245";
- status = "okay";
reg = <0x34>;
enable-gpios = <&gpio26 2 0>;
diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
index 6f45582c914e..dd7a2f92634c 100644
--- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -39,6 +39,5 @@ examples:
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
- status = "disabled";
};
...
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
index 9bf40952e5b7..b0c41ab1a746 100644
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
@@ -72,6 +72,5 @@ examples:
resets = <&iomcu_rst 0x20 3>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
- status = "disabled";
};
...
diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
index 6b2d56cc3f38..13bf6bb3f097 100644
--- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -57,7 +57,6 @@ examples:
};
pwm: pwm@e0d00000 {
- status = "disabled";
compatible = "intel,lgm-pwm";
reg = <0xe0d00000 0x30>;
clocks = <&cgu0 1>;
diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
index a2c55303810d..9593840a4a2b 100644
--- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
@@ -53,7 +53,6 @@ examples:
rtc@51 {
compatible = "microcrystal,rv3032";
reg = <0x51>;
- status = "okay";
pinctrl-0 = <&rtc_nint_pins>;
interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
trickle-resistor-ohms = <7000>;
diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
index c8b57c7fd08c..ecae9fa8561b 100644
--- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
+++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
@@ -35,7 +35,6 @@ examples:
soc_ctrl0: soc-controller@f0000000 {
compatible = "litex,soc-controller";
reg = <0xf0000000 0xc>;
- status = "okay";
};
...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 06e83461705c..f97132400bb6 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -180,7 +180,6 @@ examples:
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
- status = "okay";
sai2a: audio-controller@4400b004 {
#sound-dai-cells = <0>;
@@ -190,7 +189,6 @@ examples:
dma-names = "tx";
clocks = <&rcc SAI2_K>;
clock-names = "sai_ck";
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
index ec06789b21df..6806f53a4aed 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
@@ -127,8 +127,6 @@ examples:
compatible = "ti,j721e-cpb-audio";
model = "j721e-cpb";
- status = "okay";
-
ti,cpb-mcasp = <&mcasp10>;
ti,cpb-codec = <&pcm3168a_1>;
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
index ee9f960de36b..859d369c71e2 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
@@ -119,8 +119,6 @@ examples:
compatible = "ti,j721e-cpb-ivi-audio";
model = "j721e-cpb-ivi";
- status = "okay";
-
ti,cpb-mcasp = <&mcasp10>;
ti,cpb-codec = <&pcm3168a_1>;
--
2.27.0
next reply other threads:[~2021-07-20 17:21 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-20 17:20 Rob Herring [this message]
2021-07-20 17:49 ` [PATCH] dt-bindings: Remove "status" from schema examples Mauro Carvalho Chehab
2021-07-20 17:58 ` Laurent Pinchart
2021-07-20 18:15 ` Rui Miguel Silva
2021-07-20 18:40 ` Alexandre Belloni
2021-07-20 20:33 ` Mark Brown
2021-07-21 8:32 ` Philipp Zabel
2021-07-21 13:49 ` Rob Herring
2021-07-21 11:05 ` Oleksij Rempel
2021-07-21 14:26 ` Linus Walleij
2021-07-23 21:18 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210720172025.363238-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cy_huang@richtek.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eswara.kota@linux.intel.com \
--cc=kgugala@antmicro.com \
--cc=kuba@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mholenko@antmicro.com \
--cc=mripard@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=olivier.moysan@st.com \
--cc=p.zabel@pengutronix.de \
--cc=peter.ujfalusi@ti.com \
--cc=rashanmu@gmail.com \
--cc=rmfrfs@gmail.com \
--cc=robert.marko@sartura.hr \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
--cc=vineetha.g.jaya.kumaran@intel.com \
--cc=wens@csie.org \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).