linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Théo Borém Fabris" <theobf@usp.br>
To: jic23@kernel.org, lars@metafoo.de
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Théo Borém Fabris" <theobf@usp.br>
Subject: [PATCH v2] iio: dac: max5821: convert device register to device managed function
Date: Sat, 24 Jul 2021 19:02:00 -0300	[thread overview]
Message-ID: <20210724220159.11998-1-theobf@usp.br> (raw)

Add a device managed hook, via devm_add_action_or_reset() and
max5821_regulator_disable(), to disable voltage regulator on device
detach.
Replace iio_device_register() by devm_iio_device_register() and remove
the max5821_remove() function used to unregister the device and disable the
voltage regulator.
Remove i2c_set_clientdata() from the probe function, since
i2c_get_clientdata() is not used anymore.
Remove regulator_disable() calls from the probe function.

Signed-off-by: Théo Borém Fabris <theobf@usp.br>
---
Changelog:
V1 -> V2: Removed regulator_disable() calls and goto statements

 drivers/iio/dac/max5821.c | 41 ++++++++++++++++-----------------------
 1 file changed, 17 insertions(+), 24 deletions(-)

diff --git a/drivers/iio/dac/max5821.c b/drivers/iio/dac/max5821.c
index bd6e75699a63..bd0b7f361154 100644
--- a/drivers/iio/dac/max5821.c
+++ b/drivers/iio/dac/max5821.c
@@ -294,6 +294,11 @@ static const struct iio_info max5821_info = {
 	.write_raw = max5821_write_raw,
 };
 
+static void max5821_regulator_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
 static int max5821_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@@ -306,7 +311,6 @@ static int max5821_probe(struct i2c_client *client,
 	if (!indio_dev)
 		return -ENOMEM;
 	data = iio_priv(indio_dev);
-	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
 	mutex_init(&data->lock);
 
@@ -321,21 +325,29 @@ static int max5821_probe(struct i2c_client *client,
 		ret = PTR_ERR(data->vref_reg);
 		dev_err(&client->dev,
 			"Failed to get vref regulator: %d\n", ret);
-		goto error_free_reg;
+		return ret;
 	}
 
 	ret = regulator_enable(data->vref_reg);
 	if (ret) {
 		dev_err(&client->dev,
 			"Failed to enable vref regulator: %d\n", ret);
-		goto error_free_reg;
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&client->dev, max5821_regulator_disable,
+				       data->vref_reg);
+	if (ret) {
+		dev_err(&client->dev,
+			"Failed to add action to managed regulator: %d\n", ret);
+		return ret;
 	}
 
 	ret = regulator_get_voltage(data->vref_reg);
 	if (ret < 0) {
 		dev_err(&client->dev,
 			"Failed to get voltage on regulator: %d\n", ret);
-		goto error_disable_reg;
+		return ret;
 	}
 
 	data->vref_mv = ret / 1000;
@@ -346,25 +358,7 @@ static int max5821_probe(struct i2c_client *client,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &max5821_info;
 
-	return iio_device_register(indio_dev);
-
-error_disable_reg:
-	regulator_disable(data->vref_reg);
-
-error_free_reg:
-
-	return ret;
-}
-
-static int max5821_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct max5821_data *data = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	regulator_disable(data->vref_reg);
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id max5821_id[] = {
@@ -386,7 +380,6 @@ static struct i2c_driver max5821_driver = {
 		.pm     = &max5821_pm_ops,
 	},
 	.probe		= max5821_probe,
-	.remove		= max5821_remove,
 	.id_table	= max5821_id,
 };
 module_i2c_driver(max5821_driver);
-- 
2.20.1


             reply	other threads:[~2021-07-24 22:04 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-24 22:02 Théo Borém Fabris [this message]
2021-07-26  6:53 ` [PATCH v2] iio: dac: max5821: convert device register to device managed function Alexandru Ardelean
2021-07-31 17:17   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210724220159.11998-1-theobf@usp.br \
    --to=theobf@usp.br \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).