linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Swapnil Jakhade <sjakhade@cadence.com>
To: <vkoul@kernel.org>, <kishon@ti.com>, <p.zabel@pengutronix.de>,
	<linux-phy@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Cc: <mparab@cadence.com>, <sjakhade@cadence.com>, <lokeshvutla@ti.com>
Subject: [PATCH v3 7/9] phy: cadence-torrent: Add separate functions for reusable code
Date: Wed, 28 Jul 2021 16:54:52 +0200	[thread overview]
Message-ID: <20210728145454.15945-8-sjakhade@cadence.com> (raw)
In-Reply-To: <20210728145454.15945-1-sjakhade@cadence.com>

Torrent PHY driver currently supports single link DP configuration.
Prepare driver to support multilink DP configurations by adding
separate functions for common initialization sequence.

Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/cadence/phy-cadence-torrent.c | 53 +++++++++++++++--------
 1 file changed, 35 insertions(+), 18 deletions(-)

diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index 69466481af26..e4dd8d1711a6 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -1472,24 +1472,11 @@ static int cdns_torrent_phy_off(struct phy *phy)
 	return reset_control_assert(inst->lnk_rst);
 }
 
-static int cdns_torrent_dp_init(struct phy *phy)
+static void cdns_torrent_dp_common_init(struct cdns_torrent_phy *cdns_phy,
+					struct cdns_torrent_inst *inst)
 {
-	unsigned char lane_bits;
-	int ret;
-	struct cdns_torrent_inst *inst = phy_get_drvdata(phy);
-	struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent);
 	struct regmap *regmap = cdns_phy->regmap_dptx_phy_reg;
-
-	switch (cdns_phy->ref_clk_rate) {
-	case CLK_19_2_MHZ:
-	case CLK_25_MHZ:
-	case CLK_100_MHZ:
-		/* Valid Ref Clock Rate */
-		break;
-	default:
-		dev_err(cdns_phy->dev, "Unsupported Ref Clock Rate\n");
-		return -EINVAL;
-	}
+	unsigned char lane_bits;
 
 	cdns_torrent_dp_write(regmap, PHY_AUX_CTRL, 0x0003); /* enable AUX */
 
@@ -1510,8 +1497,10 @@ static int cdns_torrent_dp_init(struct phy *phy)
 	/* release pma_xcvr_pllclk_en_ln_*, only for the master lane */
 	cdns_torrent_dp_write(regmap, PHY_PMA_XCVR_PLLCLK_EN, 0x0001);
 
-	/* PHY PMA registers configuration functions */
-	/* Initialize PHY with max supported link rate, without SSC. */
+	/*
+	 * PHY PMA registers configuration functions
+	 * Initialize PHY with max supported link rate, without SSC.
+	 */
 	if (cdns_phy->ref_clk_rate == CLK_19_2_MHZ)
 		cdns_torrent_dp_pma_cmn_vco_cfg_19_2mhz(cdns_phy,
 							cdns_phy->max_bit_rate,
@@ -1530,6 +1519,13 @@ static int cdns_torrent_dp_init(struct phy *phy)
 
 	/* take out of reset */
 	regmap_field_write(cdns_phy->phy_reset_ctrl, 0x1);
+}
+
+static int cdns_torrent_dp_start(struct cdns_torrent_phy *cdns_phy,
+				 struct cdns_torrent_inst *inst,
+				 struct phy *phy)
+{
+	int ret;
 
 	cdns_torrent_phy_on(phy);
 
@@ -1542,6 +1538,27 @@ static int cdns_torrent_dp_init(struct phy *phy)
 	return ret;
 }
 
+static int cdns_torrent_dp_init(struct phy *phy)
+{
+	struct cdns_torrent_inst *inst = phy_get_drvdata(phy);
+	struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent);
+
+	switch (cdns_phy->ref_clk_rate) {
+	case CLK_19_2_MHZ:
+	case CLK_25_MHZ:
+	case CLK_100_MHZ:
+		/* Valid Ref Clock Rate */
+		break;
+	default:
+		dev_err(cdns_phy->dev, "Unsupported Ref Clock Rate\n");
+		return -EINVAL;
+	}
+
+	cdns_torrent_dp_common_init(cdns_phy, inst);
+
+	return cdns_torrent_dp_start(cdns_phy, inst, phy);
+}
+
 static int cdns_torrent_derived_refclk_enable(struct clk_hw *hw)
 {
 	struct cdns_torrent_derived_refclk *derived_refclk = to_cdns_torrent_derived_refclk(hw);
-- 
2.26.1


  parent reply	other threads:[~2021-07-28 14:55 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-28 14:54 [PATCH v3 0/9] PHY: Prepare Cadence Torrent PHY driver to support multilink DP Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 1/9] phy: cadence-torrent: Remove use of CamelCase to fix checkpatch CHECK message Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 2/9] phy: cadence-torrent: Reorder few functions to remove function declarations Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 3/9] phy: cadence-torrent: Add enum for supported input reference clock frequencies Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 4/9] phy: cadence-torrent: Configure PHY registers as a function of input reference clock rate Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 5/9] phy: cadence-torrent: Add PHY registers for DP in array format Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 6/9] phy: cadence-torrent: Add PHY configuration for DP with 100MHz ref clock Swapnil Jakhade
2021-07-28 14:54 ` Swapnil Jakhade [this message]
2021-07-28 14:54 ` [PATCH v3 8/9] phy: cadence-torrent: Add debug information for PHY configuration Swapnil Jakhade
2021-07-28 14:54 ` [PATCH v3 9/9] phy: cadence-torrent: Check PIPE mode PHY status to be ready for operation Swapnil Jakhade
2021-08-17 10:12 ` [PATCH v3 0/9] PHY: Prepare Cadence Torrent PHY driver to support multilink DP Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210728145454.15945-8-sjakhade@cadence.com \
    --to=sjakhade@cadence.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lokeshvutla@ti.com \
    --cc=mparab@cadence.com \
    --cc=p.zabel@pengutronix.de \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).