linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: James Morse <james.morse@arm.com>
To: x86@kernel.org, linux-kernel@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>,
	Reinette Chatre <reinette.chatre@intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	H Peter Anvin <hpa@zytor.com>, Babu Moger <Babu.Moger@amd.com>,
	James Morse <james.morse@arm.com>,
	shameerali.kolothum.thodi@huawei.com,
	Jamie Iles <jamie@nuviainc.com>,
	D Scott Phillips OS <scott@os.amperecomputing.com>,
	lcherian@marvell.com, bobo.shaobowang@huawei.com
Subject: [PATCH v7 18/24] x86/resctrl: Make ctrlval arrays the same size
Date: Wed, 28 Jul 2021 17:06:31 +0000	[thread overview]
Message-ID: <20210728170637.25610-19-james.morse@arm.com> (raw)
In-Reply-To: <20210728170637.25610-1-james.morse@arm.com>

The CODE and DATA resources report a num_closid that is half the
actual size supported by the hardware. This behaviour is visible
to user-space when CDP is enabled.
The CODE and DATA resources have their own ctrlval arrays which are half
the size of the underlying hardware because num_closid was already
adjusted. One holds the odd configurations values, the other even.

Before the CDP resources can be merged, the 'half the closids'
behaviour needs to be implemented by schemata_list_create(), but
this causes the ctrl_val[] array to be full sized.

Remove the logic from the architecture specific rdt_get_cdp_config()
setup, and add it to schemata_list_create(). Functions that
walk all the configurations, such as domain_setup_ctrlval() and
reset_all_ctrls(), take num_closid directly from struct rdt_hw_resource
also have to halve num_closid as only the lower half of each array is
in use. domain_setup_ctrlval() and reset_all_ctrls() both copy
struct rdt_hw_resource's num_closid to a struct msr_param. Correct
the value here. This is temporary as a subsequent patch will merge
all three ctrl_val[] arrays such that when CDP is in use, the
CODA/DATA layout in the array matches the hardware. reset_all_ctrls()'s
loop over the whole of ctrl_val[] is not touched as this is harmless,
and will be required as it is once the resources are merged.

Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v4:
 * Added missing words to the commit message, fixed a typo.

No changes since v3.

Changes since v2:
 * Shuffled commit message,
---
 arch/x86/kernel/cpu/resctrl/core.c     | 10 +++++++++-
 arch/x86/kernel/cpu/resctrl/rdtgroup.c |  9 +++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 755118a9ef38..9f8be5ee5e8a 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -363,7 +363,7 @@ static void rdt_get_cdp_config(int level, int type)
 	struct rdt_resource *r = &rdt_resources_all[type].r_resctrl;
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 
-	hw_res->num_closid = hw_res_l->num_closid / 2;
+	hw_res->num_closid = hw_res_l->num_closid;
 	r->cache.cbm_len = r_l->cache.cbm_len;
 	r->default_ctrl = r_l->default_ctrl;
 	r->cache.shareable_bits = r_l->cache.shareable_bits;
@@ -549,6 +549,14 @@ static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)
 
 	m.low = 0;
 	m.high = hw_res->num_closid;
+
+	/*
+	 * temporary: the array is full-size, but cat_wrmsr() still re-maps
+	 * the index.
+	 */
+	if (hw_res->conf_type != CDP_NONE)
+		m.high /= 2;
+
 	hw_res->msr_update(d, &m, r);
 	return 0;
 }
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 61037b239327..299af12c9fe4 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -2154,6 +2154,8 @@ static int schemata_list_create(void)
 		s->res = r;
 		s->conf_type = resctrl_to_arch_res(r)->conf_type;
 		s->num_closid = resctrl_arch_get_num_closid(r);
+		if (resctrl_arch_get_cdp_enabled(r->rid))
+			s->num_closid /= 2;
 
 		ret = snprintf(s->name, sizeof(s->name), r->name);
 		if (ret >= sizeof(s->name)) {
@@ -2376,6 +2378,13 @@ static int reset_all_ctrls(struct rdt_resource *r)
 	msr_param.low = 0;
 	msr_param.high = hw_res->num_closid;
 
+	/*
+	 * temporary: the array is full-sized, but cat_wrmsr() still re-maps
+	 * the index.
+	 */
+	if (hw_res->cdp_enabled)
+		msr_param.high /= 2;
+
 	/*
 	 * Disable resource control for this resource by setting all
 	 * CBMs in all domains to the maximum mask value. Pick one CPU
-- 
2.30.2


  parent reply	other threads:[~2021-07-28 17:08 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-28 17:06 [PATCH v7 00/24] x86/resctrl: Merge the CDP resources James Morse
2021-07-28 17:06 ` [PATCH v7 01/24] x86/resctrl: Split struct rdt_resource James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 02/24] x86/resctrl: Split struct rdt_domain James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 03/24] x86/resctrl: Add a separate schema list for resctrl James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 04/24] x86/resctrl: Pass the schema in info dir's private pointer James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 05/24] x86/resctrl: Label the resources with their configuration type James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 06/24] x86/resctrl: Walk the resctrl schema list instead of an arch list James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 07/24] x86/resctrl: Store the effective num_closid in the schema James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 08/24] x86/resctrl: Add resctrl_arch_get_num_closid() James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 09/24] x86/resctrl: Pass the schema to resctrl filesystem functions James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 10/24] x86/resctrl: Swizzle rdt_resource and resctrl_schema in pseudo_lock_region James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 11/24] x86/resctrl: Add a helper to read/set the CDP configuration James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 12/24] x86/resctrl: Move the schemata names into struct resctrl_schema James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 13/24] x86/resctrl: Group staged configuration into a separate struct James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 14/24] x86/resctrl: Allow different CODE/DATA configurations to be staged James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 15/24] x86/resctrl: Rename update_domains() resctrl_arch_update_domains() James Morse
2021-08-11 19:41   ` [tip: x86/cache] x86/resctrl: Rename update_domains() to resctrl_arch_update_domains() tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 16/24] x86/resctrl: Add a helper to read a closid's configuration James Morse
2021-08-11 15:50   ` Borislav Petkov
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 17/24] x86/resctrl: Pass configuration type to resctrl_arch_get_config() James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` James Morse [this message]
2021-08-11 19:41   ` [tip: x86/cache] x86/resctrl: Make ctrlval arrays the same size tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 19/24] x86/resctrl: Apply offset correction when config is staged James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 20/24] x86/resctrl: Calculate the index from the configuration type James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 21/24] x86/resctrl: Merge the ctrl_val arrays James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 22/24] x86/resctrl: Remove rdt_cdp_peer_get() James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 23/24] x86/resctrl: Expand resctrl_arch_update_domains()'s msr_param range James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 24/24] x86/resctrl: Merge the CDP resources James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-08-11 16:38 ` [PATCH v7 25/24] x86/resctrl: Make resctrl_arch_get_config() return its value James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-09-17 16:59 ` [PATCH] x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu() James Morse
2021-09-21 19:04   ` Reinette Chatre
2021-10-04 16:47   ` [tip: x86/urgent] " tip-bot2 for James Morse
2021-10-06 17:39   ` tip-bot2 for James Morse
2021-09-17 16:59 ` [PATCH] x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails James Morse
2021-09-21 19:03   ` Reinette Chatre
2021-10-04 16:47   ` [tip: x86/urgent] " tip-bot2 for James Morse
2021-10-06 17:39   ` tip-bot2 for James Morse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210728170637.25610-19-james.morse@arm.com \
    --to=james.morse@arm.com \
    --cc=Babu.Moger@amd.com \
    --cc=bobo.shaobowang@huawei.com \
    --cc=bp@alien8.de \
    --cc=fenghua.yu@intel.com \
    --cc=hpa@zytor.com \
    --cc=jamie@nuviainc.com \
    --cc=lcherian@marvell.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=reinette.chatre@intel.com \
    --cc=scott@os.amperecomputing.com \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).