From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/8] arm64: dts: rockchip: add rk356x gmac1 node
Date: Wed, 28 Jul 2021 14:00:30 -0400 [thread overview]
Message-ID: <20210728180034.717953-5-pgwipeout@gmail.com> (raw)
In-Reply-To: <20210728180034.717953-1-pgwipeout@gmail.com>
Add the gmac1 controller to the rk356x device tree.
This is the controller common to both the rk3568 and rk3566.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 47 ++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index c2aa7aeec58d..fbd9f1c366ff 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -344,6 +344,53 @@ sdmmc2: mmc@fe000000 {
status = "disabled";
};
+ gmac1: ethernet@fe010000 {
+ compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
+ reg = <0x0 0xfe010000 0x0 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>,
+ <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>,
+ <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>,
+ <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_refout",
+ "aclk_mac", "pclk_mac",
+ "clk_mac_speed", "ptp_ref";
+ resets = <&cru SRST_A_GMAC1>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&grf>;
+ snps,mixed-burst;
+ snps,tso;
+ snps,axi-config = <&gmac1_stmmac_axi_setup>;
+ snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+
+ gmac1_stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <4>;
+ snps,rd_osr_lmt = <8>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+
+ gmac1_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ queue0 {};
+ };
+
+ gmac1_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+ queue0 {};
+ };
+ };
+
qos_gpu: qos@fe128000 {
compatible = "rockchip,rk3568-qos", "syscon";
reg = <0x0 0xfe128000 0x0 0x20>;
--
2.25.1
next prev parent reply other threads:[~2021-07-28 18:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-28 18:00 [PATCH v2 0/8] fixes and enablement for rk356x Peter Geis
2021-07-28 18:00 ` [PATCH v2 1/8] arm64: dts: rockchip: fix rk3568 mbi-alias Peter Geis
2021-07-28 18:00 ` [PATCH v2 2/8] clk: rockchip: fix clk-pll rk356x early pll init Peter Geis
2021-07-28 18:00 ` [PATCH v2 3/8] arm64: dts: rockchip: add rk356x gpio debounce clocks Peter Geis
2021-07-28 18:00 ` Peter Geis [this message]
2021-07-28 18:00 ` [PATCH v2 5/8] arm64: dts: rockchip: add rk3568 tsadc nodes Peter Geis
2021-07-28 21:17 ` Heiko Stübner
2021-07-28 18:00 ` [PATCH v2 6/8] arm64: dts: rockchip: adjust rk3568 pll clocks Peter Geis
2021-07-28 18:00 ` [PATCH v2 7/8] arm64: dts: rockchip: enable gmac node on quartz64-a Peter Geis
2021-07-28 18:00 ` [PATCH v2 8/8] arm64: dts: rockchip: add thermal support to Quartz64 Model A Peter Geis
2021-07-29 13:19 ` (subset) [PATCH v2 0/8] fixes and enablement for rk356x Heiko Stuebner
2021-08-18 21:25 ` Heiko Stuebner
2021-08-18 21:42 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210728180034.717953-5-pgwipeout@gmail.com \
--to=pgwipeout@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).