From: "Krzysztof Hałasa" <khalasa@piap.pl>
To: Tim Harvey <tharvey@gateworks.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] TDA1997x: fix tda1997x_remove()
Date: Fri, 30 Jul 2021 08:59:19 +0200 [thread overview]
Message-ID: <m3tukc9tiw.fsf@t19.piap.pl> (raw)
TDA1997x driver tried to hold two values in a single variable:
device's "client data" pointer was first set to "sd" in
v4l2_i2c_subdev_init(), then it was overwritten explicitly
using dev_set_drvdata() with "state". This caused
tda1997x_remove() to fail badly.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
diff --git a/drivers/media/i2c/tda1997x.c b/drivers/media/i2c/tda1997x.c
index 17be95c0dcb3..fb37918b7fb5 100644
--- a/drivers/media/i2c/tda1997x.c
+++ b/drivers/media/i2c/tda1997x.c
@@ -2490,7 +2490,8 @@ static const struct media_entity_operations tda1997x_media_ops = {
static int tda1997x_pcm_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
- struct tda1997x_state *state = snd_soc_dai_get_drvdata(dai);
+ struct v4l2_subdev *sd = snd_soc_dai_get_drvdata(dai);
+ struct tda1997x_state *state = to_state(sd);
struct snd_soc_component *component = dai->component;
struct snd_pcm_runtime *rtd = substream->runtime;
int rate, err;
@@ -2799,7 +2800,6 @@ static int tda1997x_probe(struct i2c_client *client,
dev_err(&client->dev, "register audio codec failed\n");
goto err_free_media;
}
- dev_set_drvdata(&state->client->dev, state);
v4l_info(state->client, "registered audio codec\n");
}
--
Krzysztof "Chris" Hałasa
Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa
next reply other threads:[~2021-07-30 6:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-30 6:59 Krzysztof Hałasa [this message]
2021-08-19 18:57 ` [PATCH v2] TDA1997x: fix tda1997x_remove() Tim Harvey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3tukc9tiw.fsf@t19.piap.pl \
--to=khalasa@piap.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).