linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Iwona Winiarska <iwona.winiarska@intel.com>
To: linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: x86@kernel.org, devicetree@vger.kernel.org,
	linux-aspeed@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org,
	linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
	Andrew Jeffery <andrew@aj.id.au>,
	Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>, Jonathan Corbet <corbet@lwn.net>,
	Thomas Gleixner <tglx@linutronix.de>,
	Andy Lutomirski <luto@kernel.org>, Ingo Molnar <mingo@redhat.com>,
	Borislav Petkov <bp@alien8.de>,
	Yazen Ghannam <yazen.ghannam@amd.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Tony Luck <tony.luck@intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Randy Dunlap <rdunlap@infradead.org>,
	Zev Weiss <zweiss@equinix.com>,
	David Muller <d.mueller@elsoft.ch>,
	Iwona Winiarska <iwona.winiarska@intel.com>
Subject: [PATCH v2 13/15] hwmon: peci: Add dimmtemp driver
Date: Tue,  3 Aug 2021 13:31:32 +0200	[thread overview]
Message-ID: <20210803113134.2262882-14-iwona.winiarska@intel.com> (raw)
In-Reply-To: <20210803113134.2262882-1-iwona.winiarska@intel.com>

Add peci-dimmtemp driver for Temperature Sensor on DIMM readings that
are accessible via the processor PECI interface.

The main use case for the driver (and PECI interface) is out-of-band
management, where we're able to obtain thermal readings from an external
entity connected with PECI, e.g. BMC on server platforms.

Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
Note that the timeout was completely removed - we're going to probe
for detected DIMMs every 5 seconds until we reach "stable" state of
either getting correct DIMM data or getting all -EINVAL (which
suggest that the CPU doesn't have any DIMMs).

 drivers/hwmon/peci/Kconfig    |  13 +
 drivers/hwmon/peci/Makefile   |   2 +
 drivers/hwmon/peci/dimmtemp.c | 614 ++++++++++++++++++++++++++++++++++
 3 files changed, 629 insertions(+)
 create mode 100644 drivers/hwmon/peci/dimmtemp.c

diff --git a/drivers/hwmon/peci/Kconfig b/drivers/hwmon/peci/Kconfig
index e10eed68d70a..9d32a57badfe 100644
--- a/drivers/hwmon/peci/Kconfig
+++ b/drivers/hwmon/peci/Kconfig
@@ -14,5 +14,18 @@ config SENSORS_PECI_CPUTEMP
 	  This driver can also be built as a module. If so, the module
 	  will be called peci-cputemp.
 
+config SENSORS_PECI_DIMMTEMP
+	tristate "PECI DIMM temperature monitoring client"
+	depends on PECI
+	select SENSORS_PECI
+	select PECI_CPU
+	help
+	  If you say yes here you get support for the generic Intel PECI hwmon
+	  driver which provides Temperature Sensor on DIMM readings that are
+	  accessible via the processor PECI interface.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called peci-dimmtemp.
+
 config SENSORS_PECI
 	tristate
diff --git a/drivers/hwmon/peci/Makefile b/drivers/hwmon/peci/Makefile
index e8a0ada5ab1f..191cfa0227f3 100644
--- a/drivers/hwmon/peci/Makefile
+++ b/drivers/hwmon/peci/Makefile
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 peci-cputemp-y := cputemp.o
+peci-dimmtemp-y := dimmtemp.o
 
 obj-$(CONFIG_SENSORS_PECI_CPUTEMP)	+= peci-cputemp.o
+obj-$(CONFIG_SENSORS_PECI_DIMMTEMP)	+= peci-dimmtemp.o
diff --git a/drivers/hwmon/peci/dimmtemp.c b/drivers/hwmon/peci/dimmtemp.c
new file mode 100644
index 000000000000..6264c29bb6c0
--- /dev/null
+++ b/drivers/hwmon/peci/dimmtemp.c
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2018-2021 Intel Corporation
+
+#include <linux/auxiliary_bus.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/peci.h>
+#include <linux/peci-cpu.h>
+#include <linux/units.h>
+#include <linux/workqueue.h>
+#include <linux/x86/intel-family.h>
+
+#include "common.h"
+
+#define DIMM_MASK_CHECK_DELAY_JIFFIES	msecs_to_jiffies(5000)
+
+/* Max number of channel ranks and DIMM index per channel */
+#define CHAN_RANK_MAX_ON_HSX	8
+#define DIMM_IDX_MAX_ON_HSX	3
+#define CHAN_RANK_MAX_ON_BDX	4
+#define DIMM_IDX_MAX_ON_BDX	3
+#define CHAN_RANK_MAX_ON_BDXD	2
+#define DIMM_IDX_MAX_ON_BDXD	2
+#define CHAN_RANK_MAX_ON_SKX	6
+#define DIMM_IDX_MAX_ON_SKX	2
+#define CHAN_RANK_MAX_ON_ICX	8
+#define DIMM_IDX_MAX_ON_ICX	2
+#define CHAN_RANK_MAX_ON_ICXD	4
+#define DIMM_IDX_MAX_ON_ICXD	2
+
+#define CHAN_RANK_MAX		CHAN_RANK_MAX_ON_HSX
+#define DIMM_IDX_MAX		DIMM_IDX_MAX_ON_HSX
+#define DIMM_NUMS_MAX		(CHAN_RANK_MAX * DIMM_IDX_MAX)
+
+#define CPU_SEG_MASK		GENMASK(23, 16)
+#define GET_CPU_SEG(x)		(((x) & CPU_SEG_MASK) >> 16)
+#define CPU_BUS_MASK		GENMASK(7, 0)
+#define GET_CPU_BUS(x)		((x) & CPU_BUS_MASK)
+
+#define DIMM_TEMP_MAX		GENMASK(15, 8)
+#define DIMM_TEMP_CRIT		GENMASK(23, 16)
+#define GET_TEMP_MAX(x)		(((x) & DIMM_TEMP_MAX) >> 8)
+#define GET_TEMP_CRIT(x)	(((x) & DIMM_TEMP_CRIT) >> 16)
+
+struct peci_dimmtemp;
+
+struct dimm_info {
+	int chan_rank_max;
+	int dimm_idx_max;
+	u8 min_peci_revision;
+	int (*read_thresholds)(struct peci_dimmtemp *priv, int dimm_order,
+			       int chan_rank, u32 *data);
+};
+
+struct peci_dimm_thresholds {
+	long temp_max;
+	long temp_crit;
+	struct peci_sensor_state state;
+};
+
+enum peci_dimm_threshold_type {
+	temp_max_type,
+	temp_crit_type,
+};
+
+struct peci_dimmtemp {
+	struct peci_device *peci_dev;
+	struct device *dev;
+	const char *name;
+	const struct dimm_info *gen_info;
+	struct delayed_work detect_work;
+	struct {
+		struct peci_sensor_data temp;
+		struct peci_dimm_thresholds thresholds;
+	} dimm[DIMM_NUMS_MAX];
+	char **dimmtemp_label;
+	DECLARE_BITMAP(dimm_mask, DIMM_NUMS_MAX);
+};
+
+static u8 __dimm_temp(u32 reg, int dimm_order)
+{
+	return (reg >> (dimm_order * 8)) & 0xff;
+}
+
+static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no, long *val)
+{
+	int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
+	int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
+	u32 data;
+	int ret;
+
+	mutex_lock(&priv->dimm[dimm_no].temp.state.lock);
+	if (!peci_sensor_need_update(&priv->dimm[dimm_no].temp.state))
+		goto skip_update;
+
+	ret = peci_pcs_read(priv->peci_dev, PECI_PCS_DDR_DIMM_TEMP, chan_rank, &data);
+	if (ret) {
+		mutex_unlock(&priv->dimm[dimm_no].temp.state.lock);
+		return ret;
+	}
+
+	priv->dimm[dimm_no].temp.value = __dimm_temp(data, dimm_order) * MILLIDEGREE_PER_DEGREE;
+
+	peci_sensor_mark_updated(&priv->dimm[dimm_no].temp.state);
+
+skip_update:
+	*val = priv->dimm[dimm_no].temp.value;
+	mutex_unlock(&priv->dimm[dimm_no].temp.state.lock);
+	return 0;
+}
+
+static int update_thresholds(struct peci_dimmtemp *priv, int dimm_no)
+{
+	int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
+	int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
+	u32 data;
+	int ret;
+
+	if (!peci_sensor_need_update(&priv->dimm[dimm_no].thresholds.state))
+		return 0;
+
+	ret = priv->gen_info->read_thresholds(priv, dimm_order, chan_rank, &data);
+	if (ret == -ENODATA) /* Use default or previous value */
+		return 0;
+	if (ret)
+		return ret;
+
+	priv->dimm[dimm_no].thresholds.temp_max = GET_TEMP_MAX(data) * MILLIDEGREE_PER_DEGREE;
+	priv->dimm[dimm_no].thresholds.temp_crit = GET_TEMP_CRIT(data) * MILLIDEGREE_PER_DEGREE;
+
+	peci_sensor_mark_updated(&priv->dimm[dimm_no].thresholds.state);
+
+	return 0;
+}
+
+static int get_dimm_thresholds(struct peci_dimmtemp *priv, enum peci_dimm_threshold_type type,
+			       int dimm_no, long *val)
+{
+	int ret;
+
+	mutex_lock(&priv->dimm[dimm_no].thresholds.state.lock);
+	ret = update_thresholds(priv, dimm_no);
+	if (ret)
+		goto unlock;
+
+	switch (type) {
+	case temp_max_type:
+		*val = priv->dimm[dimm_no].thresholds.temp_max;
+		break;
+	case temp_crit_type:
+		*val = priv->dimm[dimm_no].thresholds.temp_crit;
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+unlock:
+	mutex_unlock(&priv->dimm[dimm_no].thresholds.state.lock);
+
+	return ret;
+}
+
+static int dimmtemp_read_string(struct device *dev,
+				enum hwmon_sensor_types type,
+				u32 attr, int channel, const char **str)
+{
+	struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+
+	if (attr != hwmon_temp_label)
+		return -EOPNOTSUPP;
+
+	*str = (const char *)priv->dimmtemp_label[channel];
+
+	return 0;
+}
+
+static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, long *val)
+{
+	struct peci_dimmtemp *priv = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_temp_input:
+		return get_dimm_temp(priv, channel, val);
+	case hwmon_temp_max:
+		return get_dimm_thresholds(priv, temp_max_type, channel, val);
+	case hwmon_temp_crit:
+		return get_dimm_thresholds(priv, temp_crit_type, channel, val);
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static umode_t dimmtemp_is_visible(const void *data, enum hwmon_sensor_types type,
+				   u32 attr, int channel)
+{
+	const struct peci_dimmtemp *priv = data;
+
+	if (test_bit(channel, priv->dimm_mask))
+		return 0444;
+
+	return 0;
+}
+
+static const struct hwmon_ops peci_dimmtemp_ops = {
+	.is_visible = dimmtemp_is_visible,
+	.read_string = dimmtemp_read_string,
+	.read = dimmtemp_read,
+};
+
+static int check_populated_dimms(struct peci_dimmtemp *priv)
+{
+	int chan_rank_max = priv->gen_info->chan_rank_max;
+	int dimm_idx_max = priv->gen_info->dimm_idx_max;
+	u32 chan_rank_empty = 0;
+	u64 dimm_mask = 0;
+	int chan_rank, dimm_idx, ret;
+	u32 pcs;
+
+	BUILD_BUG_ON(CHAN_RANK_MAX > 32);
+	BUILD_BUG_ON(DIMM_NUMS_MAX > 64);
+	if (chan_rank_max * dimm_idx_max > DIMM_NUMS_MAX) {
+		WARN_ONCE(1, "Unsupported number of DIMMs");
+		return -EINVAL;
+	}
+
+	for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) {
+		ret = peci_pcs_read(priv->peci_dev, PECI_PCS_DDR_DIMM_TEMP, chan_rank, &pcs);
+		if (ret) {
+			/*
+			 * Overall, we expect either success or -EINVAL in
+			 * order to determine whether DIMM is populated or not.
+			 * For anything else - we fall back to defering the
+			 * detection to be performed at a later point in time.
+			 */
+			if (ret == -EINVAL) {
+				chan_rank_empty |= BIT(chan_rank);
+				continue;
+			}
+
+			return -EAGAIN;
+		}
+
+		for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++)
+			if (__dimm_temp(pcs, dimm_idx))
+				dimm_mask |= BIT(chan_rank * dimm_idx_max + dimm_idx);
+	}
+
+	/* If we got all -EINVALs, it means that the CPU doesn't have any DIMMs. */
+	if (chan_rank_empty == GENMASK(chan_rank_max - 1, 0))
+		return -ENODEV;
+
+	/*
+	 * It's possible that memory training is not done yet. In this case we
+	 * defer the detection to be performed at a later point in time.
+	 */
+	if (!dimm_mask)
+		return -EAGAIN;
+
+	dev_dbg(priv->dev, "Scanned populated DIMMs: %#llx\n", dimm_mask);
+
+	bitmap_from_u64(priv->dimm_mask, dimm_mask);
+
+	return 0;
+}
+
+static int create_dimm_temp_label(struct peci_dimmtemp *priv, int chan)
+{
+	int rank = chan / priv->gen_info->dimm_idx_max;
+	int idx = chan % priv->gen_info->dimm_idx_max;
+
+	priv->dimmtemp_label[chan] = devm_kasprintf(priv->dev, GFP_KERNEL,
+						    "DIMM %c%d", 'A' + rank,
+						    idx + 1);
+	if (!priv->dimmtemp_label[chan])
+		return -ENOMEM;
+
+	return 0;
+}
+
+static const u32 peci_dimmtemp_temp_channel_config[] = {
+	[0 ... DIMM_NUMS_MAX - 1] = HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT,
+	0
+};
+
+static const struct hwmon_channel_info peci_dimmtemp_temp_channel = {
+	.type = hwmon_temp,
+	.config = peci_dimmtemp_temp_channel_config,
+};
+
+static const struct hwmon_channel_info *peci_dimmtemp_temp_info[] = {
+	&peci_dimmtemp_temp_channel,
+	NULL
+};
+
+static const struct hwmon_chip_info peci_dimmtemp_chip_info = {
+	.ops = &peci_dimmtemp_ops,
+	.info = peci_dimmtemp_temp_info,
+};
+
+static int create_dimm_temp_info(struct peci_dimmtemp *priv)
+{
+	int ret, i, channels;
+	struct device *dev;
+
+	/*
+	 * We expect to either find populated DIMMs and carry on with creating
+	 * sensors, or find out that there are no DIMMs populated.
+	 * All other states mean that the platform never reached the state that
+	 * allows to check DIMM state - causing us to retry later on.
+	 */
+	ret = check_populated_dimms(priv);
+	if (ret == -ENODEV) {
+		dev_dbg(priv->dev, "No DIMMs found\n");
+		return 0;
+	} else if (ret) {
+		schedule_delayed_work(&priv->detect_work, DIMM_MASK_CHECK_DELAY_JIFFIES);
+		dev_dbg(priv->dev, "Deferred populating DIMM temp info\n");
+		return ret;
+	}
+
+	channels = priv->gen_info->chan_rank_max * priv->gen_info->dimm_idx_max;
+
+	priv->dimmtemp_label = devm_kzalloc(priv->dev, channels * sizeof(char *), GFP_KERNEL);
+	if (!priv->dimmtemp_label)
+		return -ENOMEM;
+
+	for_each_set_bit(i, priv->dimm_mask, DIMM_NUMS_MAX) {
+		ret = create_dimm_temp_label(priv, i);
+		if (ret)
+			return ret;
+		mutex_init(&priv->dimm[i].thresholds.state.lock);
+		mutex_init(&priv->dimm[i].temp.state.lock);
+	}
+
+	dev = devm_hwmon_device_register_with_info(priv->dev, priv->name, priv,
+						   &peci_dimmtemp_chip_info, NULL);
+	if (IS_ERR(dev)) {
+		dev_err(priv->dev, "Failed to register hwmon device\n");
+		return PTR_ERR(dev);
+	}
+
+	dev_dbg(priv->dev, "%s: sensor '%s'\n", dev_name(dev), priv->name);
+
+	return 0;
+}
+
+static void create_dimm_temp_info_delayed(struct work_struct *work)
+{
+	struct peci_dimmtemp *priv = container_of(to_delayed_work(work),
+						  struct peci_dimmtemp,
+						  detect_work);
+	int ret;
+
+	ret = create_dimm_temp_info(priv);
+	if (ret && ret != -EAGAIN)
+		dev_err(priv->dev, "Failed to populate DIMM temp info\n");
+}
+
+static void remove_delayed_work(void *_priv)
+{
+	struct peci_dimmtemp *priv = _priv;
+
+	cancel_delayed_work_sync(&priv->detect_work);
+}
+
+static int peci_dimmtemp_probe(struct auxiliary_device *adev, const struct auxiliary_device_id *id)
+{
+	struct device *dev = &adev->dev;
+	struct peci_device *peci_dev = to_peci_device(dev->parent);
+	struct peci_dimmtemp *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->name = devm_kasprintf(dev, GFP_KERNEL, "peci_dimmtemp.cpu%d",
+				    peci_dev->info.socket_id);
+	if (!priv->name)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->peci_dev = peci_dev;
+	priv->gen_info = (const struct dimm_info *)id->driver_data;
+
+	/*
+	 * This is just a sanity check. Since we're using commands that are
+	 * guaranteed to be supported on a given platform, we should never see
+	 * revision lower than expected.
+	 */
+	if (peci_dev->info.peci_revision < priv->gen_info->min_peci_revision)
+		dev_warn(priv->dev,
+			 "Unexpected PECI revision %#x, some features may be unavailable\n",
+			 peci_dev->info.peci_revision);
+
+	INIT_DELAYED_WORK(&priv->detect_work, create_dimm_temp_info_delayed);
+
+	ret = devm_add_action_or_reset(priv->dev, remove_delayed_work, priv);
+	if (ret)
+		return ret;
+
+	ret = create_dimm_temp_info(priv);
+	if (ret && ret != -EAGAIN) {
+		dev_err(dev, "Failed to populate DIMM temp info\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int
+read_thresholds_hsx(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u32 *data)
+{
+	u8 dev, func;
+	u16 reg;
+	int ret;
+
+	/*
+	 * Device 20, Function 0: IMC 0 channel 0 -> rank 0
+	 * Device 20, Function 1: IMC 0 channel 1 -> rank 1
+	 * Device 21, Function 0: IMC 0 channel 2 -> rank 2
+	 * Device 21, Function 1: IMC 0 channel 3 -> rank 3
+	 * Device 23, Function 0: IMC 1 channel 0 -> rank 4
+	 * Device 23, Function 1: IMC 1 channel 1 -> rank 5
+	 * Device 24, Function 0: IMC 1 channel 2 -> rank 6
+	 * Device 24, Function 1: IMC 1 channel 3 -> rank 7
+	 */
+	dev = 20 + chan_rank / 2 + chan_rank / 4;
+	func = chan_rank % 2;
+	reg = 0x120 + dimm_order * 4;
+
+	ret = peci_pci_local_read(priv->peci_dev, 1, dev, func, reg, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int
+read_thresholds_bdxd(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u32 *data)
+{
+	u8 dev, func;
+	u16 reg;
+	int ret;
+
+	/*
+	 * Device 10, Function 2: IMC 0 channel 0 -> rank 0
+	 * Device 10, Function 6: IMC 0 channel 1 -> rank 1
+	 * Device 12, Function 2: IMC 1 channel 0 -> rank 2
+	 * Device 12, Function 6: IMC 1 channel 1 -> rank 3
+	 */
+	dev = 10 + chan_rank / 2 * 2;
+	func = (chan_rank % 2) ? 6 : 2;
+	reg = 0x120 + dimm_order * 4;
+
+	ret = peci_pci_local_read(priv->peci_dev, 2, dev, func, reg, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int
+read_thresholds_skx(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u32 *data)
+{
+	u8 dev, func;
+	u16 reg;
+	int ret;
+
+	/*
+	 * Device 10, Function 2: IMC 0 channel 0 -> rank 0
+	 * Device 10, Function 6: IMC 0 channel 1 -> rank 1
+	 * Device 11, Function 2: IMC 0 channel 2 -> rank 2
+	 * Device 12, Function 2: IMC 1 channel 0 -> rank 3
+	 * Device 12, Function 6: IMC 1 channel 1 -> rank 4
+	 * Device 13, Function 2: IMC 1 channel 2 -> rank 5
+	 */
+	dev = 10 + chan_rank / 3 * 2 + (chan_rank % 3 == 2 ? 1 : 0);
+	func = chan_rank % 3 == 1 ? 6 : 2;
+	reg = 0x120 + dimm_order * 4;
+
+	ret = peci_pci_local_read(priv->peci_dev, 2, dev, func, reg, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int
+read_thresholds_icx(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u32 *data)
+{
+	u32 reg_val;
+	u64 offset;
+	int ret;
+	u8 dev;
+
+	ret = peci_ep_pci_local_read(priv->peci_dev, 0, 13, 0, 2, 0xd4, &reg_val);
+	if (ret || !(reg_val & BIT(31)))
+		return -ENODATA; /* Use default or previous value */
+
+	ret = peci_ep_pci_local_read(priv->peci_dev, 0, 13, 0, 2, 0xd0, &reg_val);
+	if (ret)
+		return -ENODATA; /* Use default or previous value */
+
+	/*
+	 * Device 26, Offset 224e0: IMC 0 channel 0 -> rank 0
+	 * Device 26, Offset 264e0: IMC 0 channel 1 -> rank 1
+	 * Device 27, Offset 224e0: IMC 1 channel 0 -> rank 2
+	 * Device 27, Offset 264e0: IMC 1 channel 1 -> rank 3
+	 * Device 28, Offset 224e0: IMC 2 channel 0 -> rank 4
+	 * Device 28, Offset 264e0: IMC 2 channel 1 -> rank 5
+	 * Device 29, Offset 224e0: IMC 3 channel 0 -> rank 6
+	 * Device 29, Offset 264e0: IMC 3 channel 1 -> rank 7
+	 */
+	dev = 26 + chan_rank / 2;
+	offset = 0x224e0 + dimm_order * 4 + (chan_rank % 2) * 0x4000;
+
+	ret = peci_mmio_read(priv->peci_dev, 0, GET_CPU_SEG(reg_val), GET_CPU_BUS(reg_val),
+			     dev, 0, offset, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct dimm_info dimm_hsx = {
+	.chan_rank_max	= CHAN_RANK_MAX_ON_HSX,
+	.dimm_idx_max	= DIMM_IDX_MAX_ON_HSX,
+	.min_peci_revision = 0x33,
+	.read_thresholds = &read_thresholds_hsx,
+};
+
+static const struct dimm_info dimm_bdx = {
+	.chan_rank_max	= CHAN_RANK_MAX_ON_BDX,
+	.dimm_idx_max	= DIMM_IDX_MAX_ON_BDX,
+	.min_peci_revision = 0x33,
+	.read_thresholds = &read_thresholds_hsx,
+};
+
+static const struct dimm_info dimm_bdxd = {
+	.chan_rank_max	= CHAN_RANK_MAX_ON_BDXD,
+	.dimm_idx_max	= DIMM_IDX_MAX_ON_BDXD,
+	.min_peci_revision = 0x33,
+	.read_thresholds = &read_thresholds_bdxd,
+};
+
+static const struct dimm_info dimm_skx = {
+	.chan_rank_max	= CHAN_RANK_MAX_ON_SKX,
+	.dimm_idx_max	= DIMM_IDX_MAX_ON_SKX,
+	.min_peci_revision = 0x33,
+	.read_thresholds = &read_thresholds_skx,
+};
+
+static const struct dimm_info dimm_icx = {
+	.chan_rank_max	= CHAN_RANK_MAX_ON_ICX,
+	.dimm_idx_max	= DIMM_IDX_MAX_ON_ICX,
+	.min_peci_revision = 0x40,
+	.read_thresholds = &read_thresholds_icx,
+};
+
+static const struct dimm_info dimm_icxd = {
+	.chan_rank_max	= CHAN_RANK_MAX_ON_ICXD,
+	.dimm_idx_max	= DIMM_IDX_MAX_ON_ICXD,
+	.min_peci_revision = 0x40,
+	.read_thresholds = &read_thresholds_icx,
+};
+
+static const struct auxiliary_device_id peci_dimmtemp_ids[] = {
+	{
+		.name = "peci_cpu.dimmtemp.hsx",
+		.driver_data = (kernel_ulong_t)&dimm_hsx,
+	},
+	{
+		.name = "peci_cpu.dimmtemp.bdx",
+		.driver_data = (kernel_ulong_t)&dimm_bdx,
+	},
+	{
+		.name = "peci_cpu.dimmtemp.bdxd",
+		.driver_data = (kernel_ulong_t)&dimm_bdxd,
+	},
+	{
+		.name = "peci_cpu.dimmtemp.skx",
+		.driver_data = (kernel_ulong_t)&dimm_skx,
+	},
+	{
+		.name = "peci_cpu.dimmtemp.icx",
+		.driver_data = (kernel_ulong_t)&dimm_icx,
+	},
+	{
+		.name = "peci_cpu.dimmtemp.icxd",
+		.driver_data = (kernel_ulong_t)&dimm_icxd,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(auxiliary, peci_dimmtemp_ids);
+
+static struct auxiliary_driver peci_dimmtemp_driver = {
+	.probe		= peci_dimmtemp_probe,
+	.id_table	= peci_dimmtemp_ids,
+};
+
+module_auxiliary_driver(peci_dimmtemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@intel.com>");
+MODULE_DESCRIPTION("PECI dimmtemp driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PECI_CPU);
-- 
2.31.1


  parent reply	other threads:[~2021-08-03 11:37 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-03 11:31 [PATCH v2 00/15] Introduce PECI subsystem Iwona Winiarska
2021-08-03 11:31 ` [PATCH v2 01/15] x86/cpu: Move intel-family to arch-independent headers Iwona Winiarska
2021-10-04 19:03   ` Borislav Petkov
2021-10-11 19:21     ` Winiarska, Iwona
2021-10-11 19:40       ` Dave Hansen
2021-10-11 20:53         ` Winiarska, Iwona
2021-10-11 23:12           ` Dave Hansen
2021-10-11 20:06       ` Borislav Petkov
2021-10-11 20:38         ` Winiarska, Iwona
2021-10-11 21:31           ` Borislav Petkov
2021-10-12 23:15             ` Winiarska, Iwona
2021-10-13  6:42               ` Borislav Petkov
2021-08-03 11:31 ` [PATCH v2 02/15] x86/cpu: Extract cpuid helpers to arch-independent Iwona Winiarska
2021-10-04 19:08   ` Borislav Petkov
2021-10-11 19:32     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 03/15] dt-bindings: Add generic bindings for PECI Iwona Winiarska
2021-08-11 18:11   ` Rob Herring
2021-08-03 11:31 ` [PATCH v2 04/15] dt-bindings: Add bindings for peci-aspeed Iwona Winiarska
2021-08-11 18:11   ` Rob Herring
2021-08-03 11:31 ` [PATCH v2 05/15] ARM: dts: aspeed: Add PECI controller nodes Iwona Winiarska
2021-08-03 11:31 ` [PATCH v2 06/15] peci: Add core infrastructure Iwona Winiarska
2021-08-25 22:58   ` Dan Williams
2021-08-26 22:40     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 07/15] peci: Add peci-aspeed controller driver Iwona Winiarska
2021-08-26  1:35   ` Dan Williams
2021-08-26 23:54     ` Winiarska, Iwona
2021-08-27 16:24       ` Dan Williams
2021-08-29 19:42         ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 08/15] peci: Add device detection Iwona Winiarska
2021-08-27 19:01   ` Dan Williams
2021-11-15 22:18     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 09/15] peci: Add sysfs interface for PECI bus Iwona Winiarska
2021-08-27 19:11   ` Dan Williams
2021-11-15 22:19     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 10/15] peci: Add support for PECI device drivers Iwona Winiarska
2021-08-27 21:19   ` Dan Williams
2021-11-15 22:20     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 11/15] peci: Add peci-cpu driver Iwona Winiarska
2021-08-03 11:31 ` [PATCH v2 12/15] hwmon: peci: Add cputemp driver Iwona Winiarska
2021-08-03 15:24   ` Guenter Roeck
2021-08-04 10:43     ` Winiarska, Iwona
2021-08-03 11:31 ` Iwona Winiarska [this message]
2021-08-03 15:39   ` [PATCH v2 13/15] hwmon: peci: Add dimmtemp driver Guenter Roeck
2021-08-04 10:46     ` Winiarska, Iwona
2021-08-04 17:33       ` Guenter Roeck
2021-08-05 21:48         ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 14/15] docs: hwmon: Document PECI drivers Iwona Winiarska
2021-08-03 11:31 ` [PATCH v2 15/15] docs: Add PECI documentation Iwona Winiarska
2021-08-05 12:17 ` [PATCH v2 00/15] Introduce PECI subsystem Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210803113134.2262882-14-iwona.winiarska@intel.com \
    --to=iwona.winiarska@intel.com \
    --cc=andrew@aj.id.au \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=bp@alien8.de \
    --cc=corbet@lwn.net \
    --cc=d.mueller@elsoft.ch \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jae.hyun.yoo@linux.intel.com \
    --cc=jdelvare@suse.com \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=luto@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mingo@redhat.com \
    --cc=olof@lixom.net \
    --cc=openbmc@lists.ozlabs.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=rdunlap@infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=tony.luck@intel.com \
    --cc=x86@kernel.org \
    --cc=yazen.ghannam@amd.com \
    --cc=zweiss@equinix.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).