From: Rajendra Nayak <rnayak@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org, robh+dt@kernel.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, skakit@codeaurora.org,
konrad.dybcio@somainline.org, swboyd@chromium.org,
dianders@chromium.org, mka@chromium.org,
Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v2 2/2] arm64: dts: qcom: sc7280-idp: Add device tree files for IDP2
Date: Wed, 4 Aug 2021 18:33:19 +0530 [thread overview]
Message-ID: <1628082199-17002-3-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1628082199-17002-1-git-send-email-rnayak@codeaurora.org>
Move all the common device tree bits for both sc7280 IDPs into a
sc7280-idp.dtsi and create 2 different dts files (sc7280-idp.dts
and sc7280-idp2.dts) in order to manage differences across the
IDP SKU1 and SKU2 Boards.
PMR735A is present on IDP board only and is not present on IDP2.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sc7280-idp.dts | 328 +--------------------
.../dts/qcom/{sc7280-idp.dts => sc7280-idp.dtsi} | 55 +---
arch/arm64/boot/dts/qcom/sc7280-idp2.dts | 23 ++
4 files changed, 27 insertions(+), 380 deletions(-)
copy arch/arm64/boot/dts/qcom/{sc7280-idp.dts => sc7280-idp.dtsi} (84%)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-idp2.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index a571bfdd..50cf2cf 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index ee76d96..8390b88 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -7,17 +7,12 @@
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
-#include "sc7280.dtsi"
-#include "pm7325.dtsi"
+#include "sc7280-idp.dtsi"
#include "pmr735a.dtsi"
-#include "pm8350c.dtsi"
-#include "pmk8350.dtsi"
/ {
- model = "Qualcomm Technologies, Inc. sc7280 IDP platform";
+ model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280";
aliases {
@@ -30,186 +25,6 @@
};
&apps_rsc {
- pm7325-regulators {
- compatible = "qcom,pm7325-rpmh-regulators";
- qcom,pmic-id = "b";
-
- vreg_s1b_1p8: smps1 {
- regulator-min-microvolt = <1856000>;
- regulator-max-microvolt = <2040000>;
- };
-
- vreg_s7b_0p9: smps7 {
- regulator-min-microvolt = <535000>;
- regulator-max-microvolt = <1120000>;
- };
-
- vreg_s8b_1p2: smps8 {
- regulator-min-microvolt = <1256000>;
- regulator-max-microvolt = <1500000>;
- };
-
- vreg_l1b_0p8: ldo1 {
- regulator-min-microvolt = <825000>;
- regulator-max-microvolt = <925000>;
- };
-
- vreg_l2b_3p0: ldo2 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3544000>;
- };
-
- vreg_l6b_1p2: ldo6 {
- regulator-min-microvolt = <1140000>;
- regulator-max-microvolt = <1260000>;
- };
-
- vreg_l7b_2p9: ldo7 {
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- };
-
- vreg_l8b_0p9: ldo8 {
- regulator-min-microvolt = <870000>;
- regulator-max-microvolt = <970000>;
- };
-
- vreg_l9b_1p2: ldo9 {
- regulator-min-microvolt = <1080000>;
- regulator-max-microvolt = <1304000>;
- };
-
- vreg_l11b_1p7: ldo11 {
- regulator-min-microvolt = <1504000>;
- regulator-max-microvolt = <2000000>;
- };
-
- vreg_l12b_0p8: ldo12 {
- regulator-min-microvolt = <751000>;
- regulator-max-microvolt = <824000>;
- };
-
- vreg_l13b_0p8: ldo13 {
- regulator-min-microvolt = <530000>;
- regulator-max-microvolt = <824000>;
- };
-
- vreg_l14b_1p2: ldo14 {
- regulator-min-microvolt = <1080000>;
- regulator-max-microvolt = <1304000>;
- };
-
- vreg_l15b_0p8: ldo15 {
- regulator-min-microvolt = <765000>;
- regulator-max-microvolt = <1020000>;
- };
-
- vreg_l16b_1p2: ldo16 {
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- };
-
- vreg_l17b_1p8: ldo17 {
- regulator-min-microvolt = <1700000>;
- regulator-max-microvolt = <1900000>;
- };
-
- vreg_l18b_1p8: ldo18 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2000000>;
- };
-
- vreg_l19b_1p8: ldo19 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- };
-
- pm8350c-regulators {
- compatible = "qcom,pm8350c-rpmh-regulators";
- qcom,pmic-id = "c";
-
- vreg_s1c_2p2: smps1 {
- regulator-min-microvolt = <2190000>;
- regulator-max-microvolt = <2210000>;
- };
-
- vreg_s9c_1p0: smps9 {
- regulator-min-microvolt = <1010000>;
- regulator-max-microvolt = <1170000>;
- };
-
- vreg_l1c_1p8: ldo1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1980000>;
- };
-
- vreg_l2c_1p8: ldo2 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <1980000>;
- };
-
- vreg_l3c_3p0: ldo3 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3540000>;
- };
-
- vreg_l4c_1p8: ldo4 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vreg_l5c_1p8: ldo5 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vreg_l6c_2p9: ldo6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- vreg_l7c_3p0: ldo7 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3544000>;
- };
-
- vreg_l8c_1p8: ldo8 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <2000000>;
- };
-
- vreg_l9c_2p9: ldo9 {
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- };
-
- vreg_l10c_0p8: ldo10 {
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1050000>;
- };
-
- vreg_l11c_2p8: ldo11 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3544000>;
- };
-
- vreg_l12c_1p8: ldo12 {
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <2000000>;
- };
-
- vreg_l13c_3p0: ldo13 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3544000>;
- };
-
- vreg_bob: bob {
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3960000>;
- };
- };
-
pmr735a-regulators {
compatible = "qcom,pmr735a-rpmh-regulators";
qcom,pmic-id = "e";
@@ -242,148 +57,9 @@
};
&pmk8350_vadc {
- pmk8350_die_temp {
- reg = <PMK8350_ADC7_DIE_TEMP>;
- label = "pmk8350_die_temp";
- qcom,pre-scaling = <1 1>;
- };
-
pmr735a_die_temp {
reg = <PMR735A_ADC7_DIE_TEMP>;
label = "pmr735a_die_temp";
qcom,pre-scaling = <1 1>;
};
};
-
-&qupv3_id_0 {
- status = "okay";
-};
-
-&sdhc_1 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_on>;
- pinctrl-1 = <&sdc1_off>;
-
- non-removable;
- no-sd;
- no-sdio;
-
- vmmc-supply = <&vreg_l7b_2p9>;
- vqmmc-supply = <&vreg_l19b_1p8>;
-};
-
-&sdhc_2 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_on>;
- pinctrl-1 = <&sdc2_off>;
-
- vmmc-supply = <&vreg_l9c_2p9>;
- vqmmc-supply = <&vreg_l6c_2p9>;
-
- cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
-};
-
-&uart5 {
- status = "okay";
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
- dr_mode = "host";
-};
-
-&usb_1_hsphy {
- status = "okay";
-
- vdda-pll-supply = <&vreg_l10c_0p8>;
- vdda33-supply = <&vreg_l2b_3p0>;
- vdda18-supply = <&vreg_l1c_1p8>;
-};
-
-&usb_1_qmpphy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l6b_1p2>;
- vdda-pll-supply = <&vreg_l1b_0p8>;
-};
-
-&usb_2 {
- status = "okay";
-};
-
-&usb_2_dwc3 {
- dr_mode = "peripheral";
-};
-
-&usb_2_hsphy {
- status = "okay";
-
- vdda-pll-supply = <&vreg_l10c_0p8>;
- vdda33-supply = <&vreg_l2b_3p0>;
- vdda18-supply = <&vreg_l1c_1p8>;
-};
-
-/* PINCTRL - additions to nodes defined in sc7280.dtsi */
-
-&qup_uart5_default {
- tx {
- pins = "gpio46";
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio47";
- drive-strength = <2>;
- bias-pull-up;
- };
-};
-
-&sdc1_on {
- clk {
- bias-disable;
- drive-strength = <16>;
- };
-
- cmd {
- bias-pull-up;
- drive-strength = <10>;
- };
-
- data {
- bias-pull-up;
- drive-strength = <10>;
- };
-
- rclk {
- bias-pull-down;
- };
-};
-
-&sdc2_on {
- clk {
- bias-disable;
- drive-strength = <16>;
- };
-
- cmd {
- bias-pull-up;
- drive-strength = <10>;
- };
-
- data {
- bias-pull-up;
- drive-strength = <10>;
- };
-
- sd-cd {
- bias-pull-up;
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
similarity index 84%
copy from arch/arm64/boot/dts/qcom/sc7280-idp.dts
copy to arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index ee76d96..7a0baeb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -1,34 +1,17 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
- * sc7280 IDP board device tree source
+ * sc7280 IDP board device tree source (common between SKU1 and SKU2)
*
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
*/
-/dts-v1/;
-
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include "sc7280.dtsi"
#include "pm7325.dtsi"
-#include "pmr735a.dtsi"
#include "pm8350c.dtsi"
#include "pmk8350.dtsi"
-/ {
- model = "Qualcomm Technologies, Inc. sc7280 IDP platform";
- compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280";
-
- aliases {
- serial0 = &uart5;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
&apps_rsc {
pm7325-regulators {
compatible = "qcom,pm7325-rpmh-regulators";
@@ -209,36 +192,6 @@
regulator-max-microvolt = <3960000>;
};
};
-
- pmr735a-regulators {
- compatible = "qcom,pmr735a-rpmh-regulators";
- qcom,pmic-id = "e";
-
- vreg_l2e_1p2: ldo2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- vreg_l3e_0p9: ldo3 {
- regulator-min-microvolt = <912000>;
- regulator-max-microvolt = <1020000>;
- };
-
- vreg_l4e_1p7: ldo4 {
- regulator-min-microvolt = <1776000>;
- regulator-max-microvolt = <1890000>;
- };
-
- vreg_l5e_0p8: ldo5 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- };
-
- vreg_l6e_0p8: ldo6 {
- regulator-min-microvolt = <480000>;
- regulator-max-microvolt = <904000>;
- };
- };
};
&pmk8350_vadc {
@@ -247,12 +200,6 @@
label = "pmk8350_die_temp";
qcom,pre-scaling = <1 1>;
};
-
- pmr735a_die_temp {
- reg = <PMR735A_ADC7_DIE_TEMP>;
- label = "pmr735a_die_temp";
- qcom,pre-scaling = <1 1>;
- };
};
&qupv3_id_0 {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
new file mode 100644
index 0000000..1fc2add
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 IDP2 board device tree source
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sc7280-idp.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform";
+ compatible = "qcom,sc7280-idp2", "google,piglin", "qcom,sc7280";
+
+ aliases {
+ serial0 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2021-08-04 13:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-04 13:03 [PATCH v2 0/2] Add DT files for sc7280 IDP2 board Rajendra Nayak
2021-08-04 13:03 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Document qcom,sc7280-idp2 board Rajendra Nayak
2021-08-04 16:28 ` Stephen Boyd
2021-08-04 13:03 ` Rajendra Nayak [this message]
2021-08-04 19:47 ` [PATCH v2 2/2] arm64: dts: qcom: sc7280-idp: Add device tree files for IDP2 Konrad Dybcio
2021-08-05 3:27 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1628082199-17002-3-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=konrad.dybcio@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=skakit@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).