linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Keshava Munegowda <keshava_mgowda@ti.com>
To: <linux-usb@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <balbi@ti.com>, <khilman@ti.com>,
	<b-cousson@ti.com>, <paul@pwsan.com>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>, <gadiyar@ti.com>,
	<sameo@linux.intel.com>, <parthab@india.ti.com>,
	<tony@atomide.com>, <johnstul@us.ibm.com>, <vishwanath.bs@ti.com>
Subject: [PATCH 3/5] arm: omap: usb: register hwmods of usbhs
Date: Thu, 29 Sep 2011 19:37:19 +0530	[thread overview]
Message-ID: <1317305241-611-4-git-send-email-keshava_mgowda@ti.com> (raw)
In-Reply-To: <1317305241-611-3-git-send-email-keshava_mgowda@ti.com>

The hwmod structure of usb_host_hs  and usb_tll are
retrieved and registered with omap device

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Reviewed-by: Partha Basak <parthab@india.ti.com>
---
 arch/arm/mach-omap2/usb-host.c |  100 ++++++++++++++--------------------------
 1 files changed, 34 insertions(+), 66 deletions(-)

diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 89ae298..771dc78 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -28,51 +28,28 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <plat/usb.h>
+#include <plat/omap_device.h>
 
 #include "mux.h"
 
 #ifdef CONFIG_MFD_OMAP_USB_HOST
 
-#define OMAP_USBHS_DEVICE	"usbhs-omap"
-
-static struct resource usbhs_resources[] = {
-	{
-		.name	= "uhh",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "tll",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ehci",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ehci-irq",
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "ohci",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ohci-irq",
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device usbhs_device = {
-	.name		= OMAP_USBHS_DEVICE,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(usbhs_resources),
-	.resource	= usbhs_resources,
-};
+#define OMAP_USBHS_DEVICE	"usbhs_omap"
+#define	USBHS_UHH_HWMODNAME	"usb_host_hs"
+#define USBHS_TLL_HWMODNAME	"usb_tll_hs"
 
 static struct usbhs_omap_platform_data		usbhs_data;
 static struct ehci_hcd_omap_platform_data	ehci_data;
 static struct ohci_hcd_omap_platform_data	ohci_data;
 
+static struct omap_device_pm_latency omap_uhhtll_latency[] = {
+	  {
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func	 = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	  },
+};
+
 /* MUX settings for EHCI pins */
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
@@ -508,7 +485,10 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
-	int	i;
+	struct omap_hwmod	*oh[2];
+	struct omap_device	*od;
+	int			bus_id = -1;
+	int			i;
 
 	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
 		usbhs_data.port_mode[i] = pdata->port_mode[i];
@@ -523,44 +503,34 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 	usbhs_data.ohci_data = &ohci_data;
 
 	if (cpu_is_omap34xx()) {
-		usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE;
-		usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
-		usbhs_resources[1].start = OMAP34XX_USBTLL_BASE;
-		usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1;
-		usbhs_resources[2].start	= OMAP34XX_EHCI_BASE;
-		usbhs_resources[2].end	= OMAP34XX_EHCI_BASE + SZ_1K - 1;
-		usbhs_resources[3].start = INT_34XX_EHCI_IRQ;
-		usbhs_resources[4].start	= OMAP34XX_OHCI_BASE;
-		usbhs_resources[4].end	= OMAP34XX_OHCI_BASE + SZ_1K - 1;
-		usbhs_resources[5].start = INT_34XX_OHCI_IRQ;
 		setup_ehci_io_mux(pdata->port_mode);
 		setup_ohci_io_mux(pdata->port_mode);
 	} else if (cpu_is_omap44xx()) {
-		usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE;
-		usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1;
-		usbhs_resources[1].start = OMAP44XX_USBTLL_BASE;
-		usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1;
-		usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE;
-		usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
-		usbhs_resources[3].start = OMAP44XX_IRQ_EHCI;
-		usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE;
-		usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1;
-		usbhs_resources[5].start = OMAP44XX_IRQ_OHCI;
 		setup_4430ehci_io_mux(pdata->port_mode);
 		setup_4430ohci_io_mux(pdata->port_mode);
 	}
 
-	if (platform_device_add_data(&usbhs_device,
-				&usbhs_data, sizeof(usbhs_data)) < 0) {
-		printk(KERN_ERR "USBHS platform_device_add_data failed\n");
-		goto init_end;
+	oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
+	if (!oh[0]) {
+		pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
+		return;
 	}
 
-	if (platform_device_register(&usbhs_device) < 0)
-		printk(KERN_ERR "USBHS platform_device_register failed\n");
+	oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
+	if (!oh[1]) {
+		pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
+		return;
+	}
 
-init_end:
-	return;
+	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+				(void *)&usbhs_data, sizeof(usbhs_data),
+				omap_uhhtll_latency,
+				ARRAY_SIZE(omap_uhhtll_latency), false);
+	if (IS_ERR(od)) {
+		pr_err("Could not build hwmod devices %s,%s\n",
+			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
+		return;
+	}
 }
 
 #else
@@ -570,5 +540,3 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 }
 
 #endif
-
-
-- 
1.6.0.4


  reply	other threads:[~2011-09-29 14:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-29 14:07 [PATCH 0/5 v12] mfd: omap: usb: Runtime PM support for EHCI and OHCI drivers Keshava Munegowda
2011-09-29 14:07 ` [PATCH 1/5] arm: omap: usb: ehci and ohci hwmod structures for omap4 Keshava Munegowda
2011-09-29 14:07   ` [PATCH 2/5] arm: omap: usb: ehci and ohci hwmod structures for omap3 Keshava Munegowda
2011-09-29 14:07     ` Keshava Munegowda [this message]
2011-09-29 14:07       ` [PATCH 4/5] arm: omap: usb: device name change for the clk names of usbhs Keshava Munegowda
2011-09-29 14:07         ` [PATCH 5/5] mfd: omap: usb: Runtime PM support Keshava Munegowda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1317305241-611-4-git-send-email-keshava_mgowda@ti.com \
    --to=keshava_mgowda@ti.com \
    --cc=b-cousson@ti.com \
    --cc=balbi@ti.com \
    --cc=gadiyar@ti.com \
    --cc=johnstul@us.ibm.com \
    --cc=khilman@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=parthab@india.ti.com \
    --cc=paul@pwsan.com \
    --cc=sameo@linux.intel.com \
    --cc=tony@atomide.com \
    --cc=vishwanath.bs@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).