From: Keshava Munegowda <keshava_mgowda@ti.com>
To: <linux-usb@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <balbi@ti.com>, <khilman@ti.com>,
<b-cousson@ti.com>, <paul@pwsan.com>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>, <gadiyar@ti.com>,
<sameo@linux.intel.com>, <parthab@india.ti.com>,
<tony@atomide.com>, <johnstul@us.ibm.com>, <vishwanath.bs@ti.com>,
Keshava Munegowda <Keshava_mgowda@ti.com>
Subject: [PATCH 5/5 v14] omap: usb: host: Replace usbhs core driver APIs by Runtime pm APIs
Date: Tue, 11 Oct 2011 13:22:11 +0530 [thread overview]
Message-ID: <1318319531-20476-1-git-send-email-keshava_mgowda@ti.com> (raw)
From: Keshava Munegowda <Keshava_mgowda@ti.com>
The ehci and ohci drivers does not use the APIs of the usbhs
core driver; the runtime pm APIs are used for clock
enable/disable. Since usbhs is parent platform device of the
ehci and ohci devices, the runtime apis indirectly uses the
usb hs core device as input parameter to for clock functions.
Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Reviewed-by: Partha Basak <parthab@india.ti.com>
---
arch/arm/plat-omap/include/plat/usb.h | 3 ---
drivers/usb/host/ehci-omap.c | 17 +++++++----------
drivers/usb/host/ohci-omap3.c | 18 +++++++-----------
3 files changed, 14 insertions(+), 24 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 17d3c93..2b66dc2 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -100,9 +100,6 @@ extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-extern int omap_usbhs_enable(struct device *dev);
-extern void omap_usbhs_disable(struct device *dev);
-
extern int omap4430_phy_power(struct device *dev, int ID, int on);
extern int omap4430_phy_set_clk(struct device *dev, int on);
extern int omap4430_phy_init(struct device *dev);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 4524032..82cd3ea 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -41,6 +41,7 @@
#include <linux/usb/ulpi.h>
#include <plat/usb.h>
#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
@@ -190,11 +191,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
}
- ret = omap_usbhs_enable(dev);
- if (ret) {
- dev_err(dev, "failed to start usbhs with err %d\n", ret);
- goto err_enable;
- }
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
/*
* An undocumented "feature" in the OMAP3 EHCI controller,
@@ -240,11 +238,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
return 0;
err_add_hcd:
- omap_usbhs_disable(dev);
-
-err_enable:
disable_put_regulator(pdata);
- usb_put_hcd(hcd);
+ pm_runtime_put_sync(dev);
err_io:
iounmap(regs);
@@ -266,10 +261,12 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
struct usb_hcd *hcd = dev_get_drvdata(dev);
usb_remove_hcd(hcd);
- omap_usbhs_disable(dev);
disable_put_regulator(dev->platform_data);
iounmap(hcd->regs);
usb_put_hcd(hcd);
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+
return 0;
}
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 6048f2f..6cfedaf 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <plat/usb.h>
+#include <linux/pm_runtime.h>
/*-------------------------------------------------------------------------*/
@@ -134,7 +135,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
int irq;
if (usb_disabled())
- goto err_end;
+ return -ENODEV;
if (!dev->parent) {
dev_err(dev, "Missing parent device\n");
@@ -172,11 +173,8 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
hcd->rsrc_len = resource_size(res);
hcd->regs = regs;
- ret = omap_usbhs_enable(dev);
- if (ret) {
- dev_dbg(dev, "failed to start ohci\n");
- goto err_end;
- }
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -189,9 +187,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
return 0;
err_add_hcd:
- omap_usbhs_disable(dev);
-
-err_end:
+ pm_runtime_put_sync(dev);
usb_put_hcd(hcd);
err_io:
@@ -220,9 +216,9 @@ static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev)
iounmap(hcd->regs);
usb_remove_hcd(hcd);
- omap_usbhs_disable(dev);
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
usb_put_hcd(hcd);
-
return 0;
}
--
1.6.0.4
next reply other threads:[~2011-10-11 7:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-11 7:52 Keshava Munegowda [this message]
2011-10-13 17:59 ` [PATCH 5/5 v14] omap: usb: host: Replace usbhs core driver APIs by Runtime pm APIs Felipe Balbi
2011-10-13 18:11 ` Alan Stern
2011-10-14 0:09 ` Paul Walmsley
2011-10-14 0:12 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318319531-20476-1-git-send-email-keshava_mgowda@ti.com \
--to=keshava_mgowda@ti.com \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=gadiyar@ti.com \
--cc=johnstul@us.ibm.com \
--cc=khilman@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=parthab@india.ti.com \
--cc=paul@pwsan.com \
--cc=sameo@linux.intel.com \
--cc=tony@atomide.com \
--cc=vishwanath.bs@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).