From: Stephen Hemminger <shemminger@osdl.org>
To: Florian Schirmer <jolt@tuxbox.org>
Cc: Pekka Pietikainen <pp@ee.oulu.fi>,
jgarzik@pobox.com, linux-kernel@vger.kernel.org,
netdev@oss.sgi.com
Subject: [PATCH] Fix for b44 warnings.
Date: Mon, 13 Sep 2004 16:30:01 -0700 [thread overview]
Message-ID: <20040913163001.7fa560c6@dell_ss3.pdx.osdl.net> (raw)
In-Reply-To: <200408292218.00756.jolt@tuxbox.org>
B44 driver was using unsigned long as an io memory address.
Recent changes caused this to be a warning. This patch fixes that
and makes the readl/writel wrapper into inline's instead of macros
with magic variable side effect (yuck).
diff -Nru a/drivers/net/b44.c b/drivers/net/b44.c
--- a/drivers/net/b44.c 2004-09-13 15:33:00 -07:00
+++ b/drivers/net/b44.c 2004-09-13 15:33:00 -07:00
@@ -98,13 +98,24 @@
static void b44_init_rings(struct b44 *);
static void b44_init_hw(struct b44 *);
+static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
+{
+ return readl(bp->regs + reg);
+}
+
+static inline void bw32(const struct b44 *bp,
+ unsigned long reg, unsigned long val)
+{
+ writel(val, bp->regs + reg);
+}
+
static int b44_wait_bit(struct b44 *bp, unsigned long reg,
u32 bit, unsigned long timeout, const int clear)
{
unsigned long i;
for (i = 0; i < timeout; i++) {
- u32 val = br32(reg);
+ u32 val = br32(bp, reg);
if (clear && !(val & bit))
break;
@@ -168,7 +179,7 @@
static u32 ssb_get_core_rev(struct b44 *bp)
{
- return (br32(B44_SBIDHIGH) & SBIDHIGH_RC_MASK);
+ return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK);
}
static u32 ssb_pci_setup(struct b44 *bp, u32 cores)
@@ -180,13 +191,13 @@
ssb_get_addr(bp, SBID_REG_PCI, 0));
pci_rev = ssb_get_core_rev(bp);
- val = br32(B44_SBINTVEC);
+ val = br32(bp, B44_SBINTVEC);
val |= cores;
- bw32(B44_SBINTVEC, val);
+ bw32(bp, B44_SBINTVEC, val);
- val = br32(SSB_PCI_TRANS_2);
+ val = br32(bp, SSB_PCI_TRANS_2);
val |= SSB_PCI_PREF | SSB_PCI_BURST;
- bw32(SSB_PCI_TRANS_2, val);
+ bw32(bp, SSB_PCI_TRANS_2, val);
pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig);
@@ -195,18 +206,18 @@
static void ssb_core_disable(struct b44 *bp)
{
- if (br32(B44_SBTMSLOW) & SBTMSLOW_RESET)
+ if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET)
return;
- bw32(B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK));
+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK));
b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0);
b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1);
- bw32(B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK |
+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK |
SBTMSLOW_REJECT | SBTMSLOW_RESET));
- br32(B44_SBTMSLOW);
+ br32(bp, B44_SBTMSLOW);
udelay(1);
- bw32(B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET));
- br32(B44_SBTMSLOW);
+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET));
+ br32(bp, B44_SBTMSLOW);
udelay(1);
}
@@ -215,31 +226,31 @@
u32 val;
ssb_core_disable(bp);
- bw32(B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC));
- br32(B44_SBTMSLOW);
+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC));
+ br32(bp, B44_SBTMSLOW);
udelay(1);
/* Clear SERR if set, this is a hw bug workaround. */
- if (br32(B44_SBTMSHIGH) & SBTMSHIGH_SERR)
- bw32(B44_SBTMSHIGH, 0);
+ if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR)
+ bw32(bp, B44_SBTMSHIGH, 0);
- val = br32(B44_SBIMSTATE);
+ val = br32(bp, B44_SBIMSTATE);
if (val & (SBIMSTATE_IBE | SBIMSTATE_TO))
- bw32(B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO));
+ bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO));
- bw32(B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC));
- br32(B44_SBTMSLOW);
+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC));
+ br32(bp, B44_SBTMSLOW);
udelay(1);
- bw32(B44_SBTMSLOW, (SBTMSLOW_CLOCK));
- br32(B44_SBTMSLOW);
+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK));
+ br32(bp, B44_SBTMSLOW);
udelay(1);
}
static int ssb_core_unit(struct b44 *bp)
{
#if 0
- u32 val = br32(B44_SBADMATCH0);
+ u32 val = br32(bp, B44_SBADMATCH0);
u32 base;
type = val & SBADMATCH0_TYPE_MASK;
@@ -263,7 +274,7 @@
static int ssb_is_core_up(struct b44 *bp)
{
- return ((br32(B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK))
+ return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK))
== SBTMSLOW_CLOCK);
}
@@ -275,19 +286,19 @@
val |= ((u32) data[3]) << 16;
val |= ((u32) data[4]) << 8;
val |= ((u32) data[5]) << 0;
- bw32(B44_CAM_DATA_LO, val);
+ bw32(bp, B44_CAM_DATA_LO, val);
val = (CAM_DATA_HI_VALID |
(((u32) data[0]) << 8) |
(((u32) data[1]) << 0));
- bw32(B44_CAM_DATA_HI, val);
- bw32(B44_CAM_CTRL, (CAM_CTRL_WRITE |
+ bw32(bp, B44_CAM_DATA_HI, val);
+ bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE |
(index << CAM_CTRL_INDEX_SHIFT)));
b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
}
static inline void __b44_disable_ints(struct b44 *bp)
{
- bw32(B44_IMASK, 0);
+ bw32(bp, B44_IMASK, 0);
}
static void b44_disable_ints(struct b44 *bp)
@@ -295,34 +306,34 @@
__b44_disable_ints(bp);
/* Flush posted writes. */
- br32(B44_IMASK);
+ br32(bp, B44_IMASK);
}
static void b44_enable_ints(struct b44 *bp)
{
- bw32(B44_IMASK, bp->imask);
+ bw32(bp, B44_IMASK, bp->imask);
}
static int b44_readphy(struct b44 *bp, int reg, u32 *val)
{
int err;
- bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
- bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
+ bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
+ bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
(MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
(bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
(reg << MDIO_DATA_RA_SHIFT) |
(MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
- *val = br32(B44_MDIO_DATA) & MDIO_DATA_DATA;
+ *val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA;
return err;
}
static int b44_writephy(struct b44 *bp, int reg, u32 val)
{
- bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
- bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
+ bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
+ bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
(MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
(bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
(reg << MDIO_DATA_RA_SHIFT) |
@@ -382,20 +393,20 @@
bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE);
bp->flags |= pause_flags;
- val = br32(B44_RXCONFIG);
+ val = br32(bp, B44_RXCONFIG);
if (pause_flags & B44_FLAG_RX_PAUSE)
val |= RXCONFIG_FLOW;
else
val &= ~RXCONFIG_FLOW;
- bw32(B44_RXCONFIG, val);
+ bw32(bp, B44_RXCONFIG, val);
- val = br32(B44_MAC_FLOW);
+ val = br32(bp, B44_MAC_FLOW);
if (pause_flags & B44_FLAG_TX_PAUSE)
val |= (MAC_FLOW_PAUSE_ENAB |
(0xc0 & MAC_FLOW_RX_HI_WATER));
else
val &= ~MAC_FLOW_PAUSE_ENAB;
- bw32(B44_MAC_FLOW, val);
+ bw32(bp, B44_MAC_FLOW, val);
}
static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
@@ -491,11 +502,11 @@
val = &bp->hw_stats.tx_good_octets;
for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) {
- *val++ += br32(reg);
+ *val++ += br32(bp, reg);
}
val = &bp->hw_stats.rx_good_octets;
for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) {
- *val++ += br32(reg);
+ *val++ += br32(bp, reg);
}
}
@@ -535,14 +546,14 @@
if (!netif_carrier_ok(bp->dev) &&
(bmsr & BMSR_LSTATUS)) {
- u32 val = br32(B44_TX_CTRL);
+ u32 val = br32(bp, B44_TX_CTRL);
u32 local_adv, remote_adv;
if (bp->flags & B44_FLAG_FULL_DUPLEX)
val |= TX_CTRL_DUPLEX;
else
val &= ~TX_CTRL_DUPLEX;
- bw32(B44_TX_CTRL, val);
+ bw32(bp, B44_TX_CTRL, val);
if (!(bp->flags & B44_FLAG_FORCE_LINK) &&
!b44_readphy(bp, MII_ADVERTISE, &local_adv) &&
@@ -587,7 +598,7 @@
{
u32 cur, cons;
- cur = br32(B44_DMATX_STAT) & DMATX_STAT_CDMASK;
+ cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK;
cur /= sizeof(struct dma_desc);
/* XXX needs updating when NETIF_F_SG is supported */
@@ -611,7 +622,7 @@
TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH)
netif_wake_queue(bp->dev);
- bw32(B44_GPTIMER, 0);
+ bw32(bp, B44_GPTIMER, 0);
}
/* Works like this. This chip writes a 'struct rx_header" 30 bytes
@@ -708,7 +719,7 @@
u32 cons, prod;
received = 0;
- prod = br32(B44_DMARX_STAT) & DMARX_STAT_CDMASK;
+ prod = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK;
prod /= sizeof(struct dma_desc);
cons = bp->rx_cons;
@@ -787,7 +798,7 @@
}
bp->rx_cons = cons;
- bw32(B44_DMARX_PTR, cons * sizeof(struct dma_desc));
+ bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc));
return received;
}
@@ -851,8 +862,8 @@
spin_lock_irqsave(&bp->lock, flags);
- istat = br32(B44_ISTAT);
- imask = br32(B44_IMASK);
+ istat = br32(bp, B44_ISTAT);
+ imask = br32(bp, B44_IMASK);
/* ??? What the fuck is the purpose of the interrupt mask
* ??? register if we have to mask it out by hand anyways?
@@ -872,8 +883,8 @@
dev->name);
}
- bw32(B44_ISTAT, istat);
- br32(B44_ISTAT);
+ bw32(bp, B44_ISTAT, istat);
+ br32(bp, B44_ISTAT);
}
spin_unlock_irqrestore(&bp->lock, flags);
return IRQ_RETVAL(handled);
@@ -937,11 +948,11 @@
wmb();
- bw32(B44_DMATX_PTR, entry * sizeof(struct dma_desc));
+ bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
if (bp->flags & B44_FLAG_BUGGY_TXPTR)
- bw32(B44_DMATX_PTR, entry * sizeof(struct dma_desc));
+ bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
if (bp->flags & B44_FLAG_REORDER_BUG)
- br32(B44_DMATX_PTR);
+ br32(bp, B44_DMATX_PTR);
if (TX_BUFFS_AVAIL(bp) < 1)
netif_stop_queue(dev);
@@ -1109,27 +1120,27 @@
{
unsigned long reg;
- bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
+ bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL)
- br32(reg);
+ br32(bp, reg);
for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL)
- br32(reg);
+ br32(bp, reg);
}
/* bp->lock is held. */
static void b44_chip_reset(struct b44 *bp)
{
if (ssb_is_core_up(bp)) {
- bw32(B44_RCV_LAZY, 0);
- bw32(B44_ENET_CTRL, ENET_CTRL_DISABLE);
+ bw32(bp, B44_RCV_LAZY, 0);
+ bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1);
- bw32(B44_DMATX_CTRL, 0);
+ bw32(bp, B44_DMATX_CTRL, 0);
bp->tx_prod = bp->tx_cons = 0;
- if (br32(B44_DMARX_STAT) & DMARX_STAT_EMASK) {
+ if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) {
b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE,
100, 0);
}
- bw32(B44_DMARX_CTRL, 0);
+ bw32(bp, B44_DMARX_CTRL, 0);
bp->rx_prod = bp->rx_cons = 0;
} else {
ssb_pci_setup(bp, (bp->core_unit == 0 ?
@@ -1142,20 +1153,20 @@
b44_clear_stats(bp);
/* Make PHY accessible. */
- bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
+ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
(0x0d & MDIO_CTRL_MAXF_MASK)));
- br32(B44_MDIO_CTRL);
+ br32(bp, B44_MDIO_CTRL);
- if (!(br32(B44_DEVCTRL) & DEVCTRL_IPP)) {
- bw32(B44_ENET_CTRL, ENET_CTRL_EPSEL);
- br32(B44_ENET_CTRL);
+ if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
+ bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL);
+ br32(bp, B44_ENET_CTRL);
bp->flags &= ~B44_FLAG_INTERNAL_PHY;
} else {
- u32 val = br32(B44_DEVCTRL);
+ u32 val = br32(bp, B44_DEVCTRL);
if (val & DEVCTRL_EPR) {
- bw32(B44_DEVCTRL, (val & ~DEVCTRL_EPR));
- br32(B44_DEVCTRL);
+ bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR));
+ br32(bp, B44_DEVCTRL);
udelay(100);
}
bp->flags |= B44_FLAG_INTERNAL_PHY;
@@ -1172,13 +1183,13 @@
/* bp->lock is held. */
static void __b44_set_mac_addr(struct b44 *bp)
{
- bw32(B44_CAM_CTRL, 0);
+ bw32(bp, B44_CAM_CTRL, 0);
if (!(bp->dev->flags & IFF_PROMISC)) {
u32 val;
__b44_cam_write(bp, bp->dev->dev_addr, 0);
- val = br32(B44_CAM_CTRL);
- bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
+ val = br32(bp, B44_CAM_CTRL);
+ bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
}
}
@@ -1212,30 +1223,30 @@
b44_setup_phy(bp);
/* Enable CRC32, set proper LED modes and power on PHY */
- bw32(B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
- bw32(B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
+ bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
+ bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
/* This sets the MAC address too. */
__b44_set_rx_mode(bp->dev);
/* MTU + eth header + possible VLAN tag + struct rx_header */
- bw32(B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
- bw32(B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
+ bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
+ bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
- bw32(B44_TX_WMARK, 56); /* XXX magic */
- bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
- bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
- bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
+ bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
+ bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
+ bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
+ bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
(bp->rx_offset << DMARX_CTRL_ROSHIFT)));
- bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
+ bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
- bw32(B44_DMARX_PTR, bp->rx_pending);
+ bw32(bp, B44_DMARX_PTR, bp->rx_pending);
bp->rx_prod = bp->rx_pending;
- bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
+ bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
- val = br32(B44_ENET_CTRL);
- bw32(B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
+ val = br32(bp, B44_ENET_CTRL);
+ bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
}
static int b44_open(struct net_device *dev)
@@ -1372,11 +1383,11 @@
int i=0;
unsigned char zero[6] = {0,0,0,0,0,0};
- val = br32(B44_RXCONFIG);
+ val = br32(bp, B44_RXCONFIG);
val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
if (dev->flags & IFF_PROMISC) {
val |= RXCONFIG_PROMISC;
- bw32(B44_RXCONFIG, val);
+ bw32(bp, B44_RXCONFIG, val);
} else {
__b44_set_mac_addr(bp);
@@ -1388,9 +1399,9 @@
for(;i<64;i++) {
__b44_cam_write(bp, zero, i);
}
- bw32(B44_RXCONFIG, val);
- val = br32(B44_CAM_CTRL);
- bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
+ bw32(bp, B44_RXCONFIG, val);
+ val = br32(bp, B44_CAM_CTRL);
+ bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
}
}
@@ -1760,7 +1771,7 @@
spin_lock_init(&bp->lock);
- bp->regs = (unsigned long) ioremap(b44reg_base, b44reg_len);
+ bp->regs = ioremap(b44reg_base, b44reg_len);
if (bp->regs == 0UL) {
printk(KERN_ERR PFX "Cannot map device registers, "
"aborting.\n");
diff -Nru a/drivers/net/b44.h b/drivers/net/b44.h
--- a/drivers/net/b44.h 2004-09-13 15:33:00 -07:00
+++ b/drivers/net/b44.h 2004-09-13 15:33:00 -07:00
@@ -395,9 +395,6 @@
#define SSB_PCI_MASK1 0xfc000000
#define SSB_PCI_MASK2 0xc0000000
-#define br32(REG) readl(bp->regs + (REG))
-#define bw32(REG,VAL) writel((VAL), bp->regs + (REG))
-
/* 4400 PHY registers */
#define B44_MII_AUXCTRL 24 /* Auxiliary Control */
#define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */
@@ -530,7 +527,7 @@
struct net_device_stats stats;
struct b44_hw_stats hw_stats;
- unsigned long regs;
+ volatile void __iomem *regs;
struct pci_dev *pdev;
struct net_device *dev;
next prev parent reply other threads:[~2004-09-13 23:31 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-29 20:17 [PATCH][0/4] b44: Cleanup and bcm47xx support Florian Schirmer
2004-08-29 20:33 ` [PATCH][1/4] b44: Ignore carrier lost errors Florian Schirmer
2004-08-29 20:49 ` Jeff Garzik
2004-08-29 21:04 ` Florian Schirmer
2004-08-29 23:45 ` David S. Miller
2004-08-29 23:49 ` Jeff Garzik
2004-08-30 6:10 ` Pekka Pietikainen
2004-08-30 7:04 ` Florian Schirmer
2004-09-17 16:00 ` Jeff Garzik
2004-09-17 16:00 ` Jeff Garzik
2004-09-17 16:02 ` Jeff Garzik
2004-09-17 15:54 ` Jeff Garzik
2004-08-29 20:34 ` [PATCH][2/4] b44: Cleanup SiliconBackplane definitions/functions Florian Schirmer
2004-09-17 15:55 ` Jeff Garzik
2004-08-29 20:36 ` [PATCH][3/4] b44: Add support for PHY-less cards Florian Schirmer
2004-08-29 20:39 ` [PATCH][4/4] b44: Add bcm47xx support Florian Schirmer
2004-09-13 23:30 ` Stephen Hemminger [this message]
2004-09-13 23:33 ` [PATCH] Fix for b44 warnings David S. Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040913163001.7fa560c6@dell_ss3.pdx.osdl.net \
--to=shemminger@osdl.org \
--cc=jgarzik@pobox.com \
--cc=jolt@tuxbox.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@oss.sgi.com \
--cc=pp@ee.oulu.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).