From: Sascha Hauer <s.hauer@pengutronix.de>
To: linux-kernel@vger.kernel.org
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Jean Delvare <khali@linux-fr.org>,
linux-i2c@vger.kernel.org, linux-watchdog@vger.kernel.org,
Ben Dooks <ben-linux@fluff.org>,
kernel@pengutronix.de, Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver
Date: Wed, 1 Feb 2012 14:26:33 +0100 [thread overview]
Message-ID: <1328102793-4313-4-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1328102793-4313-1-git-send-email-s.hauer@pengutronix.de>
This driver provides support for the CGEB watchdog found on some
Congatec x86 modules.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/watchdog/Kconfig | 9 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/congatec_cgeb_watchdog.c | 181 +++++++++++++++++++++++++++++
3 files changed, 191 insertions(+), 0 deletions(-)
create mode 100644 drivers/watchdog/congatec_cgeb_watchdog.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 79fd606..a1f35a5 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -880,6 +880,15 @@ config SBC_EPX_C3_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called sbc_epx_c3.
+config CONGATEC_CGEB_WATCHDOG
+ tristate "Congatec CGEB watchdog"
+ ---help---
+ This driver provides support for the watchdogs found on Congatec
+ modules with the CGEB BIOS interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called congatec_cgeb_wdt.
+
# M32R Architecture
# M68K Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index fe893e9..d0b2f1d 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -107,6 +107,7 @@ obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
obj-$(CONFIG_MACHZ_WDT) += machzwd.o
obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
obj-$(CONFIG_INTEL_SCU_WATCHDOG) += intel_scu_watchdog.o
+obj-$(CONFIG_CONGATEC_CGEB_WATCHDOG) += congatec_cgeb_watchdog.o
# M32R Architecture
diff --git a/drivers/watchdog/congatec_cgeb_watchdog.c b/drivers/watchdog/congatec_cgeb_watchdog.c
new file mode 100644
index 0000000..a4be745
--- /dev/null
+++ b/drivers/watchdog/congatec_cgeb_watchdog.c
@@ -0,0 +1,181 @@
+/*
+ * CGEB watchdog driver
+ *
+ * (c) 2011 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/mfd/congatec-cgeb.h>
+
+#define CGOS_WDOG_MODE_REBOOT_PC 0
+#define CGOS_WDOG_MODE_RESTART_OS 1
+#define CGOS_WDOG_MODE_STAGED 0x80
+
+#define CGOS_WDOG_OPMODE_DISABLED 0
+#define CGOS_WDOG_OPMODE_ONETIME_TRIG 1
+#define CGOS_WDOG_OPMODE_SINGLE_EVENT 2
+#define CGOS_WDOG_OPMODE_EVENT_REPEAT 3
+
+#define CGOS_WDOG_EVENT_INT 0 /* NMI/IRQ */
+#define CGOS_WDOG_EVENT_SCI 1 /* SMI/SCI */
+#define CGOS_WDOG_EVENT_RST 2 /* system reset */
+#define CGOS_WDOG_EVENT_BTN 3 /* power button */
+
+#define CGOS_WDOG_EVENT_MAX_STAGES 3
+
+struct cgeb_watchdog_stage {
+ unsigned long timeout;
+ unsigned long event;
+};
+
+struct cgeb_watchdog_config {
+ unsigned long size;
+ unsigned long timeout; /* not used in staged mode */
+ unsigned long delay;
+ unsigned long mode;
+ /* optional parameters for staged watchdog */
+ unsigned long op_mode;
+ unsigned long stage_count;
+ struct cgeb_watchdog_stage stages[CGOS_WDOG_EVENT_MAX_STAGES];
+};
+
+struct cgeb_watchdog_priv {
+ struct cgeb_board_data *board;
+ struct watchdog_device wdd;
+ unsigned int timeout_s;
+ int unit;
+};
+
+static struct watchdog_info cgeb_wdd_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .firmware_version = 0,
+ .identity = "cgeb watchdog",
+};
+
+static unsigned int watchdog_set_config(struct cgeb_watchdog_priv *priv,
+ unsigned int timeout_s)
+{
+ struct cgeb_board_data *board = priv->board;
+ struct cgeb_watchdog_config wdi;
+ struct cgeb_function_parameters fps;
+
+ memset(&wdi, 0, sizeof(wdi));
+ memset(&fps, 0, sizeof(fps));
+
+ fps.unit = priv->unit;
+ fps.iptr = &wdi;
+
+ wdi.timeout = timeout_s * 1000;
+ wdi.delay = 0;
+ wdi.size = sizeof(wdi);
+ wdi.mode = CGOS_WDOG_MODE_REBOOT_PC;
+
+ return cgeb_call(board, &fps, CgebWDogSetConfig);
+}
+
+static int cgeb_watchdog_start(struct watchdog_device *wdd)
+{
+ struct cgeb_watchdog_priv *priv = watchdog_get_drvdata(wdd);
+
+ return watchdog_set_config(priv, priv->timeout_s);
+}
+
+static int cgeb_watchdog_stop(struct watchdog_device *wdd)
+{
+ struct cgeb_watchdog_priv *priv = watchdog_get_drvdata(wdd);
+
+ return watchdog_set_config(priv, 0);
+}
+
+static int cgeb_watchdog_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout_s)
+{
+ struct cgeb_watchdog_priv *priv = watchdog_get_drvdata(wdd);
+
+ if (!timeout_s)
+ return -EINVAL;
+
+ priv->timeout_s = timeout_s;
+
+ return 0;
+}
+
+struct watchdog_ops cgeb_watchdog_ops = {
+ .start = cgeb_watchdog_start,
+ .stop = cgeb_watchdog_stop,
+ .set_timeout = cgeb_watchdog_set_timeout,
+};
+
+static int __devinit cgeb_watchdog_probe(struct platform_device *pdev)
+{
+ struct cgeb_watchdog_priv *priv;
+ struct cgeb_pdata *pdata = pdev->dev.platform_data;
+ int ret;
+
+ dev_info(&pdev->dev, "registering\n");
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->wdd.ops = &cgeb_watchdog_ops;
+ priv->wdd.info = &cgeb_wdd_info;
+ priv->wdd.min_timeout = 1;
+ priv->wdd.max_timeout = 3600;
+ priv->board = pdata->board;
+ priv->unit = pdata->unit;
+
+ watchdog_set_drvdata(&priv->wdd, priv);
+ platform_set_drvdata(pdev, priv);
+
+ ret = watchdog_register_device(&priv->wdd);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int __devexit cgeb_watchdog_remove(struct platform_device *pdev)
+{
+ struct cgeb_watchdog_priv *priv = platform_get_drvdata(pdev);
+
+ watchdog_unregister_device(&priv->wdd);
+
+ return 0;
+}
+
+static struct platform_driver cgeb_watchdog_driver = {
+ .probe = cgeb_watchdog_probe,
+ .remove = __exit_p(cgeb_watchdog_remove),
+ .driver = {
+ .name = "cgeb-watchdog",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init cgeb_watchdog_driver_init(void)
+{
+ return platform_driver_register(&cgeb_watchdog_driver);
+}
+
+static void __exit cgeb_watchdog_driver_exit(void)
+{
+ platform_driver_unregister(&cgeb_watchdog_driver);
+}
+
+module_init(cgeb_watchdog_driver_init);
+module_exit(cgeb_watchdog_driver_exit);
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("cgeb watchdog driver");
+MODULE_LICENSE("GPL");
--
1.7.2.5
next prev parent reply other threads:[~2012-02-01 13:27 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-01 13:26 [RESEND] Congatec CGEB base, i2c and watchdog driver support Sascha Hauer
2012-02-01 13:26 ` [PATCH 1/3] mfd: Add basic support for the Congatec CGEB BIOS interface Sascha Hauer
2012-02-06 19:07 ` Christian Gmeiner
2012-02-20 16:39 ` Samuel Ortiz
2012-02-20 18:07 ` Sascha Hauer
2012-02-27 13:58 ` Samuel Ortiz
2012-02-27 17:24 ` Sascha Hauer
2012-02-28 14:32 ` Mark Brown
2012-02-01 13:26 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
2012-02-07 8:38 ` Christian Gmeiner
2012-02-07 10:10 ` Wolfram Sang
2012-02-15 13:54 ` Sascha Hauer
2012-02-13 23:22 ` Ben Dooks
2012-02-01 13:26 ` Sascha Hauer [this message]
2012-02-07 15:08 ` [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver Wolfram Sang
2012-02-15 13:41 ` Sascha Hauer
2012-02-06 10:58 ` [RESEND] Congatec CGEB base, i2c and watchdog driver support Christian Gmeiner
-- strict thread matches above, loose matches on Subject: below --
2013-02-12 10:02 [PATCH] " Sascha Hauer
2013-02-12 10:02 ` [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver Sascha Hauer
2013-03-26 10:16 ` Christian Gmeiner
2013-03-26 14:33 ` Guenter Roeck
2013-04-03 15:09 ` Sascha Hauer
2013-04-03 15:30 ` Guenter Roeck
2013-04-03 17:06 ` Sascha Hauer
2013-04-03 15:16 ` Sascha Hauer
2012-01-16 15:32 [RFC] Congatec CGEB base, i2c and watchdog driver support Sascha Hauer
2012-01-16 15:32 ` [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328102793-4313-4-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=ben-linux@fluff.org \
--cc=kernel@pengutronix.de \
--cc=khali@linux-fr.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).