From: Darren Hart <dvhart@linux.intel.com>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Darren Hart <dvhart@linux.intel.com>,
Tomoya MORINAGA <tomoya.rohm@gmail.com>,
Feng Tang <feng.tang@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Cox <alan@linux.intel.com>,
linux-serial@vger.kernel.org
Subject: [PATCH 1/5] pch_uart: Use uartclk instead of base_baud
Date: Fri, 9 Mar 2012 09:51:48 -0800 [thread overview]
Message-ID: <ae0029b9e1131467232389e4dfa630f50e159de0.1331315372.git.dvhart@linux.intel.com> (raw)
In-Reply-To: <cover.1331315372.git.dvhart@linux.intel.com>
The term "base baud" refers to the fastest baud rate the device can communicate
at. This is clock/16. pch_uart is using base_baud as the clock itself. Rename
the variables to be semantically correct.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tomoya MORINAGA <tomoya.rohm@gmail.com>
CC: Feng Tang <feng.tang@intel.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Alan Cox <alan@linux.intel.com>
CC: linux-serial@vger.kernel.org
---
drivers/tty/serial/pch_uart.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index aa4d07b..5178213 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -206,7 +206,7 @@ enum {
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-#define DEFAULT_BAUD_RATE 1843200 /* 1.8432MHz */
+#define DEFAULT_UARTCLK 1843200 /* 1.8432MHz */
struct pch_uart_buffer {
unsigned char *buf;
@@ -221,7 +221,7 @@ struct eg20t_port {
unsigned int iobase;
struct pci_dev *pdev;
int fifo_size;
- int base_baud;
+ int uartclk;
int start_tx;
int start_rx;
int tx_empty;
@@ -387,7 +387,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
unsigned int dll, dlm, lcr;
int div;
- div = DIV_ROUND_CLOSEST(priv->base_baud / 16, baud);
+ div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud);
if (div < 0 || USHRT_MAX <= div) {
dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
return -EINVAL;
@@ -1205,9 +1205,9 @@ static int pch_uart_startup(struct uart_port *port)
priv->tx_empty = 1;
if (port->uartclk)
- priv->base_baud = port->uartclk;
+ priv->uartclk = port->uartclk;
else
- port->uartclk = priv->base_baud;
+ port->uartclk = priv->uartclk;
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
ret = pch_uart_hal_set_line(priv, default_baud,
@@ -1557,7 +1557,7 @@ static int __init pch_console_setup(struct console *co, char *options)
return -ENODEV;
/* setup uartclock */
- port->uartclk = DEFAULT_BAUD_RATE;
+ port->uartclk = DEFAULT_UARTCLK;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1600,7 +1600,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
unsigned int iobase;
unsigned int mapbase;
unsigned char *rxbuf;
- int fifosize, base_baud;
+ int fifosize, uartclk;
int port_type;
struct pch_uart_driver_data *board;
const char *board_name;
@@ -1617,12 +1617,12 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
if (!rxbuf)
goto init_port_free_txbuf;
- base_baud = DEFAULT_BAUD_RATE;
+ uartclk = DEFAULT_UARTCLK;
/* quirk for CM-iTC board */
board_name = dmi_get_system_info(DMI_BOARD_NAME);
if (board_name && strstr(board_name, "CM-iTC"))
- base_baud = 192000000; /* 192.0MHz */
+ uartclk = 192000000; /* 192.0MHz */
switch (port_type) {
case PORT_UNKNOWN:
@@ -1648,7 +1648,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
priv->rxbuf.size = PAGE_SIZE;
priv->fifo_size = fifosize;
- priv->base_baud = base_baud;
+ priv->uartclk = uartclk;
priv->port_type = PORT_MAX_8250 + port_type + 1;
priv->port.dev = &pdev->dev;
priv->port.iobase = iobase;
--
1.7.6.5
next prev parent reply other threads:[~2012-03-09 17:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-09 17:51 [PATCH 0/5 V3] pch_uart: Cleanups, board quirks, and user uartclk parameter Darren Hart
2012-03-09 17:51 ` Darren Hart [this message]
2012-03-09 17:51 ` [PATCH 2/5] pch_uart: Add Fish River Island II uart clock quirks Darren Hart
2012-03-09 17:51 ` [PATCH 3/5] pch_uart: Add user_uartclk parameter Darren Hart
2012-03-09 17:51 ` [PATCH 4/5] pch_uart: Use existing default_baud in setup_console Darren Hart
2012-03-09 17:51 ` [PATCH 5/5] pch_uart: Add module parameter descriptions Darren Hart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ae0029b9e1131467232389e4dfa630f50e159de0.1331315372.git.dvhart@linux.intel.com \
--to=dvhart@linux.intel.com \
--cc=alan@linux.intel.com \
--cc=feng.tang@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=tomoya.rohm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).