linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Subject: [PATCH 2/2] block: split discard into aligned requests
Date: Wed, 14 Mar 2012 18:12:28 +0100	[thread overview]
Message-ID: <1331745148-24885-3-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1331745148-24885-1-git-send-email-pbonzini@redhat.com>

When a disk has a relatively large discard_granularity or small
max_discard_sectors, discards are not split with optimal alignment.
In the limit case of discard_granularity == max_discard_sectors, all
requests might be aligned incorrectly, so in fact you might end up
with no discarded logical blocks at all.

One example that helps showing how the patch works is with
discard_granularity == 64, max_discard_sectors == 128.  A request that is
submitted for 256 sectors 2..257 will be split in two: 2..129, 130..257.
However, only 2 aligned blocks out of 3 are included in the request;
128..191 may be left intact and not discarded.  With this patch, the
first request will be truncated to ensure good alignment of what's left,
and the split will be 2..127, 128..255, 256..257.  discard_alignment is
also taken into account.

At most one extra request will be introduced, because the first request
will be reduced by at most granularity-1 sectors, and granularity
must be less than max_discard_sectors.  Subsequent requests will run
on round_down(max_discard_sectors, granularity) sectors, as in the
current code.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 block/blk-lib.c |   32 ++++++++++++++++++++++----------
 1 files changed, 22 insertions(+), 10 deletions(-)

diff --git a/block/blk-lib.c b/block/blk-lib.c
index d4bb160..837ce96 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -44,7 +44,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 	struct request_queue *q = bdev_get_queue(bdev);
 	int type = REQ_WRITE | REQ_DISCARD;
 	unsigned int max_discard_sectors;
-	unsigned int granularity;
+	unsigned int granularity, alignment, mask;
 	struct bio_batch bb;
 	struct bio *bio;
 	int ret = 0;
@@ -57,10 +57,12 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 
 	/* Zero-sector (unknown) and one-sector granularities are the same.  */
 	granularity = max(q->limits.discard_granularity >> 9, 1U);
+	mask = granularity - 1;
+	alignment = (q->limits.discard_alignment >> 9) & mask;
 
 	/*
 	 * Ensure that max_discard_sectors is of the proper
-	 * granularity
+	 * granularity, so that requests stay aligned after a split.
 	 */
 	max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9);
 	max_discard_sectors = round_down(max_discard_sectors, granularity);
@@ -80,25 +82,35 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 	bb.wait = &wait;
 
 	while (nr_sects) {
+		unsigned int req_sects;
+		sector_t end_sect;
+
 		bio = bio_alloc(gfp_mask, 1);
 		if (!bio) {
 			ret = -ENOMEM;
 			break;
 		}
 
+		req_sects = min_t(sector_t, nr_sects, max_discard_sectors);
+
+		/*
+		 * If splitting a request, and the next starting sector would be
+		 * misaligned, stop the discard at the previous aligned sector.
+		 */
+		end_sect = sector + req_sects;
+		if (req_sects < nr_sects && (end_sect & mask) != alignment) {
+			end_sect = round_down(end_sect - alignment, granularity) + alignment;
+			req_sects = end_sect - sector;
+		}
+
 		bio->bi_sector = sector;
 		bio->bi_end_io = bio_batch_end_io;
 		bio->bi_bdev = bdev;
 		bio->bi_private = &bb;
 
-		if (nr_sects > max_discard_sectors) {
-			bio->bi_size = max_discard_sectors << 9;
-			nr_sects -= max_discard_sectors;
-			sector += max_discard_sectors;
-		} else {
-			bio->bi_size = nr_sects << 9;
-			nr_sects = 0;
-		}
+		bio->bi_size = req_sects << 9;
+		nr_sects -= req_sects;
+		sector = end_sect;
 
 		atomic_inc(&bb.done);
 		submit_bio(type, bio);
-- 
1.7.7.6


  parent reply	other threads:[~2012-03-14 17:12 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-14 17:12 [PATCH 0/2] block: align start sector of a discard request Paolo Bonzini
2012-03-14 17:12 ` [PATCH 1/2] block: tweak rounding of max_discard_sectors Paolo Bonzini
2012-03-27  9:04   ` Christoph Hellwig
2012-03-14 17:12 ` Paolo Bonzini [this message]
2012-03-27  9:06   ` [PATCH 2/2] block: split discard into aligned requests Christoph Hellwig
2012-03-21 21:48 ` [PATCH 0/2] block: align start sector of a discard request Paolo Bonzini
2012-03-27  6:43 ` Paolo Bonzini
2012-03-27  6:54   ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1331745148-24885-3-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=axboe@kernel.dk \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).