linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: <linux-arm-kernel@lists.infradead.org>
Cc: "HACHIMI Samir" <shachimi@adeneo-embedded.com>,
	shawn.guo@linaro.org, thierry.reding@avionic-design.de,
	linux-kernel@vger.kernel.org,
	"Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>,
	kernel@pengutronix.de, "Philipp Zabel" <p.zabel@pengutronix.de>,
	"Sascha Hauer" <s.hauer@pengutronix.de>
Subject: [PATCH 5/9] pwm i.MX: add devicetree support
Date: Thu,  6 Sep 2012 14:48:11 +0200	[thread overview]
Message-ID: <1346935695-25179-6-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1346935695-25179-1-git-send-email-s.hauer@pengutronix.de>

From: Philipp Zabel <p.zabel@pengutronix.de>

At the same time remove platform based support. No user for
this driver has made it into mainline so far, so all we break
is out of tree stuff.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
---
 Documentation/devicetree/bindings/pwm/imx-pwm.txt |   17 ++++++++
 drivers/pwm/pwm-imx.c                             |   45 ++++++++++++++++-----
 2 files changed, 52 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pwm/imx-pwm.txt

diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
new file mode 100644
index 0000000..9b9b185
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
@@ -0,0 +1,17 @@
+Freescale i.MX PWM controller
+
+Required properties:
+- compatible: should be "fsl,<soc>-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2.  The first cell specifies the per-chip index
+  of the PWM to use and the second cell is the duty cycle in nanoseconds.
+- interrupts: The interrupt for the pwm controller
+
+Example:
+
+pwm1: pwm@53fb4000 {
+	#pwm-cells = <2>;
+	compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+	reg = <0x53fb4000 0x4000>;
+	interrupts = <61>;
+};
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 97f385e..675e2bb 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -16,8 +16,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
-#include <mach/hardware.h>
-
+#include <linux/of_device.h>
 
 /* i.MX1 and i.MX21 share the same PWM function block: */
 
@@ -203,12 +202,41 @@ static struct pwm_ops imx_pwm_ops = {
 	.owner = THIS_MODULE,
 };
 
+struct imx_pwm_data {
+	int (*config)(struct pwm_chip *chip,
+		struct pwm_device *pwm, int duty_ns, int period_ns);
+	void (*set_enable)(struct pwm_chip *chip, bool enable);
+};
+
+static struct imx_pwm_data imx_pwm_data_v1 = {
+	.config = imx_pwm_config_v1,
+	.set_enable = imx_pwm_set_enable_v1,
+};
+
+static struct imx_pwm_data imx_pwm_data_v2 = {
+	.config = imx_pwm_config_v2,
+	.set_enable = imx_pwm_set_enable_v2,
+};
+
+static const struct of_device_id imx_pwm_dt_ids[] = {
+	{ .compatible = "fsl,imx1-pwm", .data = &imx_pwm_data_v1, },
+	{ .compatible = "fsl,imx27-pwm", .data = &imx_pwm_data_v2, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids);
+
 static int __devinit imx_pwm_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *of_id =
+			of_match_device(imx_pwm_dt_ids, &pdev->dev);
+	struct imx_pwm_data *data;
 	struct imx_chip *imx;
 	struct resource *r;
 	int ret = 0;
 
+	if (!of_id)
+		return -ENODEV;
+
 	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
 	if (imx == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
@@ -235,13 +263,9 @@ static int __devinit imx_pwm_probe(struct platform_device *pdev)
 	if (imx->mmio_base == NULL)
 		return -EADDRNOTAVAIL;
 
-	if (cpu_is_mx1() || cpu_is_mx21()) {
-		imx->config = imx_pwm_config_v1;
-		imx->set_enable = imx_pwm_set_enable_v1;
-	} else {
-		imx->config = imx_pwm_config_v2;
-		imx->set_enable = imx_pwm_set_enable_v2;
-	}
+	data = of_id->data;
+	imx->config = data->config;
+	imx->set_enable = data->set_enable;
 
 	ret = pwmchip_add(&imx->chip);
 	if (ret < 0)
@@ -264,7 +288,8 @@ static int __devexit imx_pwm_remove(struct platform_device *pdev)
 
 static struct platform_driver imx_pwm_driver = {
 	.driver		= {
-		.name	= "mxc_pwm",
+		.name	= "imx-pwm",
+		.of_match_table = of_match_ptr(imx_pwm_dt_ids),
 	},
 	.probe		= imx_pwm_probe,
 	.remove		= __devexit_p(imx_pwm_remove),
-- 
1.7.10.4


  parent reply	other threads:[~2012-09-06 12:48 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-06 12:48 [PATCH v3] pwm i.MX: add devicetree support Sascha Hauer
2012-09-06 12:48 ` [PATCH 1/9] pwm i.MX: factor out SoC specific functions Sascha Hauer
2012-09-07 13:04   ` Thierry Reding
2012-09-06 12:48 ` [PATCH 2/9] pwm i.MX: remove unnecessary if in pwm_[en|dis]able Sascha Hauer
2012-09-06 12:48 ` [PATCH 3/9] pwm i.MX: add functions to enable/disable pwm Sascha Hauer
2012-09-06 12:48 ` [PATCH 4/9] pwm i.MX: Use module_platform_driver Sascha Hauer
2012-09-06 12:48 ` Sascha Hauer [this message]
2012-09-06 12:48 ` [PATCH 6/9] pwm i.MX: use per clock unconditionally Sascha Hauer
2012-09-06 12:48 ` [PATCH 7/9] pwm i.MX: fix clock lookup Sascha Hauer
2012-09-06 18:31   ` Benoît Thébaudeau
2012-09-06 18:42     ` Sascha Hauer
2012-09-06 19:09       ` Benoît Thébaudeau
2012-09-07  7:41         ` Sascha Hauer
2012-09-07  9:57           ` Benoît Thébaudeau
2012-09-06 12:48 ` [PATCH 8/9] ARM i.MX53: Add pwm support Sascha Hauer
2012-09-06 12:48 ` [PATCH 9/9] ARM i.MX: remove PWM platform support Sascha Hauer
2012-09-07 13:10 ` [PATCH v3] pwm i.MX: add devicetree support Thierry Reding
2012-09-07 17:14   ` Sascha Hauer
  -- strict thread matches above, loose matches on Subject: below --
2012-08-28 11:48 i.MX pwm patches Sascha Hauer
2012-08-28 11:48 ` [PATCH 5/9] pwm i.MX: add devicetree support Sascha Hauer
2012-08-30 22:26   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346935695-25179-6-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=benoit.thebaudeau@advansee.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=shachimi@adeneo-embedded.com \
    --cc=shawn.guo@linaro.org \
    --cc=thierry.reding@avionic-design.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).