From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org, jbottomley@parallels.com
Subject: [PATCH 3/3] virtio-scsi: support online resizing of disks
Date: Tue, 2 Oct 2012 17:25:48 +0200 [thread overview]
Message-ID: <1349191548-7120-4-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1349191548-7120-1-git-send-email-pbonzini@redhat.com>
Support the LUN parameter change event. Currently, the host fires this event
when the capacity of a disk is changed from the virtual machine monitor.
The resize then appears in the kernel log like this:
sd 0:0:0:0: [sda] 46137344 512-byte logical blocks: (23.6 GB/22.0 GIb)
sda: detected capacity change from 22548578304 to 23622320128
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
drivers/scsi/virtio_scsi.c | 31 ++++++++++++++++++++++++++++++-
include/linux/virtio_scsi.h | 2 ++
2 files changed, 32 insertions(+), 1 deletions(-)
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index a7cf726..595af1a 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -279,6 +279,31 @@ static void virtscsi_handle_transport_reset(struct virtio_scsi *vscsi,
}
}
+static void virtscsi_handle_param_change(struct virtio_scsi *vscsi,
+ struct virtio_scsi_event *event)
+{
+ struct scsi_device *sdev;
+ struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev);
+ unsigned int target = event->lun[1];
+ unsigned int lun = (event->lun[2] << 8) | event->lun[3];
+ u8 asc = event->reason & 255;
+ u8 ascq = event->reason >> 8;
+
+ sdev = scsi_device_lookup(shost, 0, target, lun);
+ if (!sdev) {
+ pr_err("SCSI device %d 0 %d %d not found\n",
+ shost->host_no, target, lun);
+ return;
+ }
+
+ /* Handle "Parameters changed", "Mode parameters changed", and
+ "Capacity data has changed". */
+ if (asc == 0x2a && (ascq == 0x00 || ascq == 0x01 || ascq == 0x09))
+ scsi_rescan_device(&sdev->sdev_gendev);
+
+ scsi_device_put(sdev);
+}
+
static void virtscsi_handle_event(struct work_struct *work)
{
struct virtio_scsi_event_node *event_node =
@@ -297,6 +322,9 @@ static void virtscsi_handle_event(struct work_struct *work)
case VIRTIO_SCSI_T_TRANSPORT_RESET:
virtscsi_handle_transport_reset(vscsi, event);
break;
+ case VIRTIO_SCSI_T_PARAM_CHANGE:
+ virtscsi_handle_param_change(vscsi, event);
+ break;
default:
pr_err("Unsupport virtio scsi event %x\n", event->event);
}
@@ -737,7 +765,8 @@ static struct virtio_device_id id_table[] = {
};
static unsigned int features[] = {
- VIRTIO_SCSI_F_HOTPLUG
+ VIRTIO_SCSI_F_HOTPLUG,
+ VIRTIO_SCSI_F_CHANGE,
};
static struct virtio_driver virtio_scsi_driver = {
diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h
index dc8d305..d6b4440 100644
--- a/include/linux/virtio_scsi.h
+++ b/include/linux/virtio_scsi.h
@@ -72,6 +72,7 @@ struct virtio_scsi_config {
/* Feature Bits */
#define VIRTIO_SCSI_F_INOUT 0
#define VIRTIO_SCSI_F_HOTPLUG 1
+#define VIRTIO_SCSI_F_CHANGE 2
/* Response codes */
#define VIRTIO_SCSI_S_OK 0
@@ -108,6 +109,7 @@ struct virtio_scsi_config {
#define VIRTIO_SCSI_T_NO_EVENT 0
#define VIRTIO_SCSI_T_TRANSPORT_RESET 1
#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2
+#define VIRTIO_SCSI_T_PARAM_CHANGE 3
/* Reasons of transport reset event */
#define VIRTIO_SCSI_EVT_RESET_HARD 0
--
1.7.1
prev parent reply other threads:[~2012-10-02 15:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-02 15:25 [PATCH 0/3] virtio-scsi updates for 3.7 Paolo Bonzini
2012-10-02 15:25 ` [PATCH 1/3] virtio-scsi: initialize scatterlist structure Paolo Bonzini
2012-10-02 15:25 ` [PATCH 2/3] virtio-scsi: fix LUNs greater than 255 Paolo Bonzini
2012-10-02 15:25 ` Paolo Bonzini [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349191548-7120-4-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=jbottomley@parallels.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).