From: Dag Brattli <dagb@fast.no>
To: torvalds@transmeta.com
Cc: linux-kernel@vger.kernel.org
Subject: [patch] patch-2.4.0-test11-irda1
Date: Sun, 26 Nov 2000 22:00:12 GMT [thread overview]
Message-ID: <200011262200.WAA80893@tepid.osl.fast.no> (raw)
Linus,
Please apply this patch to your latest 2.4 code. The patch have been
tested by users at the Linux-IrDA mailing-list which confirms that
it fixes the specific problems listed below.
Changes:
o Devfs support with IrCOMM (pmhahn?)
o IrLAN connection failures with DHCP (me)
o NSC FIR dongle fixes (Pontus Fuchs)
o Fixes IrLAP discovery problems with some devices (me)
o Updates to some doc files (me)
-- Dag
diff -urpN linux-2.4.0-test11-pre6/Documentation/networking/irda.txt linux/Documentation/networking/irda.txt
--- linux-2.4.0-test11-pre6/Documentation/networking/irda.txt Tue Sep 7 19:14:36 1999
+++ linux/Documentation/networking/irda.txt Fri Nov 17 23:23:39 2000
@@ -1,10 +1,10 @@
To use the IrDA protocols within Linux you will need to get a suitable copy
of the IrDA Utilities. More detailed information about these and associated
-programs can be found on http://www.cs.uit.no/linux-irda/
+programs can be found on http://irda.sourceforge.net/
For more information about how to use the IrDA protocol stack, see the
-IR-HOWTO (http://www.snafu.de/~wehe/IR-HOWTO.html) written by Werner Heuser
-<wehe@snafu.de>
+IR-HOWTO (http://www.mobilix.org/Infrared-HOWTO/Infrared-HOWTO.html) written by Werner Heuser
+<wehe@mobilix.org>
There is an active mailing list for discussing Linux-IrDA matters called
linux-irda. To subscribe to it, visit:
diff -urpN linux-2.4.0-test11-pre6/MAINTAINERS linux/MAINTAINERS
--- linux-2.4.0-test11-pre6/MAINTAINERS Thu Nov 23 13:17:15 2000
+++ linux/MAINTAINERS Fri Nov 17 23:25:14 2000
@@ -645,9 +645,9 @@ S: Maintained
IRDA SUBSYSTEM
P: Dag Brattli
-M: Dag Brattli <dagb@cs.uit.no>
+M: Dag Brattli <dag@brattli.net>
L: linux-irda@pasta.cs.uit.no
-W: http://www.cs.uit.no/linux-irda/
+W: http://irda.sourceforge.net/
S: Maintained
ISAPNP
diff -urpN linux-2.4.0-test11-pre6/drivers/net/irda/irtty.c linux/drivers/net/irda/irtty.c
--- linux-2.4.0-test11-pre6/drivers/net/irda/irtty.c Thu Nov 23 13:17:18 2000
+++ linux/drivers/net/irda/irtty.c Sun Nov 19 20:41:00 2000
@@ -960,7 +960,7 @@ static int irtty_net_ioctl(struct net_de
ASSERT(self != NULL, return -1;);
ASSERT(self->magic == IRTTY_MAGIC, return -1;);
- IRDA_DEBUG(2, __FUNCTION__ "(), %s, (cmd=0x%X)\n", dev->name, cmd);
+ IRDA_DEBUG(3, __FUNCTION__ "(), %s, (cmd=0x%X)\n", dev->name, cmd);
/* Disable interrupts & save flags */
save_flags(flags);
diff -urpN linux-2.4.0-test11-pre6/drivers/net/irda/nsc-ircc.c linux/drivers/net/irda/nsc-ircc.c
--- linux-2.4.0-test11-pre6/drivers/net/irda/nsc-ircc.c Thu Nov 23 13:17:18 2000
+++ linux/drivers/net/irda/nsc-ircc.c Wed Nov 22 23:01:34 2000
@@ -708,9 +708,12 @@ static int nsc_ircc_setup(chipio_t *info
switch_bank(iobase, BANK0);
/* Set FIFO threshold to TX17, RX16, reset and enable FIFO's */
- switch_bank(iobase, BANK0);
+ switch_bank(iobase, BANK0);
outb(FCR_RXTH|FCR_TXTH|FCR_TXSR|FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
-
+
+ outb(0x03, iobase+LCR); /* 8 bit word length */
+ outb(MCR_SIR, iobase+MCR); /* Start at SIR-mode, also clears LSR*/
+
/* Set FIFO size to 32 */
switch_bank(iobase, BANK2);
outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
@@ -723,7 +726,7 @@ static int nsc_ircc_setup(chipio_t *info
switch_bank(iobase, BANK6);
outb(0x20, iobase+0); /* Set 32 bits FIR CRC */
outb(0x0a, iobase+1); /* Set MIR pulse width */
- outb(0x0d, iobase+2); /* Set SIR pulse width */
+ outb(0x0d, iobase+2); /* Set SIR pulse width to 1.6us */
outb(0x2a, iobase+4); /* Set beginning frag, and preamble length */
MESSAGE("%s, driver loaded (Dag Brattli)\n", driver_name);
@@ -804,8 +807,6 @@ static void nsc_ircc_init_dongle_interfa
dongle_types[dongle_id]);
break;
case 0x04: /* Sharp RY5HD01 */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not supported yet\n",
- dongle_types[dongle_id]);
break;
case 0x05: /* Reserved, but this is what the Thinkpad reports */
IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
@@ -892,8 +893,7 @@ static void nsc_ircc_change_dongle_speed
dongle_types[dongle_id]);
break;
case 0x04: /* Sharp RY5HD01 */
- IRDA_DEBUG(0, __FUNCTION__ "(), %s not supported yet\n",
- dongle_types[dongle_id]);
+ break;
case 0x05: /* Reserved */
IRDA_DEBUG(0, __FUNCTION__ "(), %s not defined by irda yet\n",
dongle_types[dongle_id]);
diff -urpN linux-2.4.0-test11-pre6/net/irda/ircomm/ircomm_core.c linux/net/irda/ircomm/ircomm_core.c
--- linux-2.4.0-test11-pre6/net/irda/ircomm/ircomm_core.c Thu Nov 23 13:17:28 2000
+++ linux/net/irda/ircomm/ircomm_core.c Sat Nov 18 10:23:46 2000
@@ -512,7 +512,7 @@ int ircomm_proc_read(char *buf, char **s
#endif /* CONFIG_PROC_FS */
#ifdef MODULE
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_AUTHOR("Dag Brattli <dag@brattli.net>");
MODULE_DESCRIPTION("IrCOMM protocol");
int init_module(void)
diff -urpN linux-2.4.0-test11-pre6/net/irda/ircomm/ircomm_tty.c linux/net/irda/ircomm/ircomm_tty.c
--- linux-2.4.0-test11-pre6/net/irda/ircomm/ircomm_tty.c Thu Nov 23 13:17:28 2000
+++ linux/net/irda/ircomm/ircomm_tty.c Sat Nov 18 10:17:52 2000
@@ -100,7 +100,11 @@ int __init ircomm_tty_init(void)
memset(&driver, 0, sizeof(struct tty_driver));
driver.magic = TTY_DRIVER_MAGIC;
driver.driver_name = "ircomm";
+#ifdef CONFIG_DEVFS_FS
+ driver.name = "ircomm%d";
+#else
driver.name = "ircomm";
+#endif
driver.major = IRCOMM_TTY_MAJOR;
driver.minor_start = IRCOMM_TTY_MINOR;
driver.num = IRCOMM_TTY_PORTS;
diff -urpN linux-2.4.0-test11-pre6/net/irda/irlan/irlan_client_event.c linux/net/irda/irlan/irlan_client_event.c
--- linux-2.4.0-test11-pre6/net/irda/irlan/irlan_client_event.c Thu Jan 6 23:46:18 2000
+++ linux/net/irda/irlan/irlan_client_event.c Sun Nov 19 21:25:28 2000
@@ -108,11 +108,10 @@ static int irlan_client_state_idle(struc
self->client.iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
irlan_client_get_value_confirm);
/* Get some values from peer IAS */
+ irlan_next_client_state(self, IRLAN_QUERY);
iriap_getvaluebyclass_request(self->client.iriap,
self->saddr, self->daddr,
"IrLAN", "IrDA:TinyTP:LsapSel");
-
- irlan_next_client_state(self, IRLAN_QUERY);
break;
case IRLAN_WATCHDOG_TIMEOUT:
IRDA_DEBUG(2, __FUNCTION__ "(), IRLAN_WATCHDOG_TIMEOUT\n");
diff -urpN linux-2.4.0-test11-pre6/net/irda/irlap_event.c linux/net/irda/irlap_event.c
--- linux-2.4.0-test11-pre6/net/irda/irlap_event.c Thu Nov 23 13:17:29 2000
+++ linux/net/irda/irlap_event.c Sun Nov 19 20:42:46 2000
@@ -4,10 +4,10 @@
* Version: 0.9
* Description: IrLAP state machine implementation
* Status: Experimental.
- * Author: Dag Brattli <dagb@cs.uit.no>
+ * Author: Dag Brattli <dag@brattli.net>
* Created at: Sat Aug 16 00:59:29 1997
* Modified at: Sat Dec 25 21:07:57 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
+ * Modified by: Dag Brattli <dag@brattli.net>
*
* Copyright (c) 1998-2000 Dag Brattli <dag@brattli.net>,
* Copyright (c) 1998 Thomas Davis <ratbert@radiks.net>
@@ -551,13 +551,15 @@ static int irlap_state_query(struct irla
* since we want to work even with devices that violate the
* timing requirements.
*/
- if (irda_device_is_receiving(self->netdev)) {
- IRDA_DEBUG(1, __FUNCTION__
+ if (irda_device_is_receiving(self->netdev) && !self->add_wait) {
+ IRDA_DEBUG(2, __FUNCTION__
"(), device is slow to answer, "
"waiting some more!\n");
irlap_start_slot_timer(self, MSECS_TO_JIFFIES(10));
+ self->add_wait = TRUE;
return ret;
}
+ self->add_wait = FALSE;
if (self->s < self->S) {
irlap_send_discovery_xid_frame(self, self->S,
@@ -1324,9 +1326,7 @@ static int irlap_state_nrm_p(struct irla
* of receiving a frame (page 45, IrLAP). Check that
* we only do this once for each frame.
*/
- if (irda_device_is_receiving(self->netdev) &&
- !self->add_wait)
- {
+ if (irda_device_is_receiving(self->netdev) && !self->add_wait) {
IRDA_DEBUG(1, "FINAL_TIMER_EXPIRED when receiving a "
"frame! Waiting a little bit more!\n");
irlap_start_final_timer(self, MSECS_TO_JIFFIES(300));
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
reply other threads:[~2000-11-26 22:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200011262200.WAA80893@tepid.osl.fast.no \
--to=dagb@fast.no \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).