linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Patrick McHardy <kaber@trash.net>,
	"David S. Miller" <davem@davemloft.net>
Subject: [ 27/42] netfilter: dont reset nf_trace in nf_reset()
Date: Mon, 29 Apr 2013 12:02:09 -0700	[thread overview]
Message-ID: <20130429184755.486113843@linuxfoundation.org> (raw)
In-Reply-To: <20130429184752.435249613@linuxfoundation.org>

3.8-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Patrick McHardy <kaber@trash.net>

[ Upstream commit 124dff01afbdbff251f0385beca84ba1b9adda68 ]

Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code
to reset nf_trace in nf_reset(). This is wrong and unnecessary.

nf_reset() is used in the following cases:

- when passing packets up the the socket layer, at which point we want to
  release all netfilter references that might keep modules pinned while
  the packet is queued. nf_trace doesn't matter anymore at this point.

- when encapsulating or decapsulating IPsec packets. We want to continue
  tracing these packets after IPsec processing.

- when passing packets through virtual network devices. Only devices on
  that encapsulate in IPv4/v6 matter since otherwise nf_trace is not
  used anymore. Its not entirely clear whether those packets should
  be traced after that, however we've always done that.

- when passing packets through virtual network devices that make the
  packet cross network namespace boundaries. This is the only cases
  where we clearly want to reset nf_trace and is also what the
  original patch intended to fix.

Add a new function nf_reset_trace() and use it in dev_forward_skb() to
fix this properly.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/skbuff.h |    7 +++++++
 net/core/dev.c         |    1 +
 2 files changed, 8 insertions(+)

--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2597,6 +2597,13 @@ static inline void nf_reset(struct sk_bu
 #endif
 }
 
+static inline void nf_reset_trace(struct sk_buff *skb)
+{
+#if IS_ENABLED(CONFIG_NETFILTER_XT_TARGET_TRACE)
+	skb->nf_trace = 0;
+#endif
+}
+
 /* Note: This doesn't put any conntrack and bridge info in dst. */
 static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src)
 {
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1737,6 +1737,7 @@ int dev_forward_skb(struct net_device *d
 	skb->mark = 0;
 	secpath_reset(skb);
 	nf_reset(skb);
+	nf_reset_trace(skb);
 	return netif_rx(skb);
 }
 EXPORT_SYMBOL_GPL(dev_forward_skb);



  parent reply	other threads:[~2013-04-29 19:34 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-29 19:01 [ 00/42] 3.8.11-stable review Greg Kroah-Hartman
2013-04-29 19:01 ` [ 01/42] aio: fix possible invalid memory access when DEBUG is enabled Greg Kroah-Hartman
2013-04-29 19:01 ` [ 02/42] TTY: do not update atime/mtime on read/write Greg Kroah-Hartman
2013-04-30  0:14   ` Simon Kirby
2013-04-30  0:21     ` Greg Kroah-Hartman
2013-04-30  0:36       ` Simon Kirby
2013-04-30  1:37         ` Greg Kroah-Hartman
2013-04-30 23:50           ` Simon Kirby
2013-05-01  0:57           ` Linus Torvalds
2013-05-01  1:41             ` Linus Torvalds
2013-05-01  5:23               ` Jiri Slaby
2013-05-01 13:05               ` Wolfram Gloger
2013-05-02 16:11               ` Simon Kirby
2013-04-29 19:01 ` [ 03/42] TTY: fix atime/mtime regression Greg Kroah-Hartman
2013-04-30 12:02   ` Wolfram Gloger
2013-04-29 19:01 ` [ 04/42] sparc64: Fix race in TLB batch processing Greg Kroah-Hartman
2013-04-29 19:01 ` [ 05/42] atm: update msg_namelen in vcc_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 06/42] ax25: fix info leak via msg_name in ax25_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 07/42] Bluetooth: fix possible info leak in bt_sock_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 08/42] Bluetooth: RFCOMM - Fix missing msg_namelen update in rfcomm_sock_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 09/42] Bluetooth: SCO - Fix missing msg_namelen update in sco_sock_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 10/42] caif: Fix missing msg_namelen update in caif_seqpkt_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 11/42] irda: Fix missing msg_namelen update in irda_recvmsg_dgram() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 12/42] iucv: Fix missing msg_namelen update in iucv_sock_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 13/42] l2tp: fix info leak in l2tp_ip6_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 14/42] llc: Fix missing msg_namelen update in llc_ui_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 15/42] netrom: fix info leak via msg_name in nr_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 16/42] NFC: llcp: fix info leaks via msg_name in llcp_sock_recvmsg() Greg Kroah-Hartman
2013-04-29 19:01 ` [ 17/42] rose: fix info leak via msg_name in rose_recvmsg() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 18/42] tipc: fix info leaks via msg_name in recv_msg/recv_stream Greg Kroah-Hartman
2013-04-29 19:02 ` [ 19/42] cbq: incorrect processing of high limits Greg Kroah-Hartman
2013-04-29 19:02 ` [ 20/42] net IPv6 : Fix broken IPv6 routing table after loopback down-up Greg Kroah-Hartman
2013-04-29 19:02 ` [ 21/42] net: count hw_addr syncs so that unsync works properly Greg Kroah-Hartman
2013-04-29 19:02 ` [ 22/42] atl1e: limit gso segment size to prevent generation of wrong ip length fields Greg Kroah-Hartman
2013-04-29 19:02 ` [ 23/42] bonding: fix bonding_masters race condition in bond unloading Greg Kroah-Hartman
2013-04-29 19:02 ` [ 24/42] bonding: IFF_BONDING is not stripped on enslave failure Greg Kroah-Hartman
2013-04-29 19:02 ` [ 25/42] bonding: fix l23 and l34 load balancing in forwarding path Greg Kroah-Hartman
2013-04-29 19:02 ` [ 26/42] af_unix: If we dont care about credentials coallesce all messages Greg Kroah-Hartman
2013-04-29 19:02 ` Greg Kroah-Hartman [this message]
2013-04-29 19:02 ` [ 28/42] ipv6/tcp: Stop processing ICMPv6 redirect messages Greg Kroah-Hartman
2013-04-29 19:02 ` [ 29/42] rtnetlink: Call nlmsg_parse() with correct header length Greg Kroah-Hartman
2013-04-29 19:02 ` [ 30/42] tcp: incoming connections might use wrong route under synflood Greg Kroah-Hartman
2013-04-29 19:02 ` [ 31/42] tcp: Reallocate headroom if it would overflow csum_start Greg Kroah-Hartman
2013-04-29 19:02 ` [ 32/42] net: mvmdio: add select PHYLIB Greg Kroah-Hartman
2013-04-29 19:02 ` [ 33/42] esp4: fix error return code in esp_output() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 34/42] net: mvneta: fix improper tx queue usage in mvneta_tx() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 35/42] net: cdc_mbim: remove bogus sizeof() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 36/42] tcp: call tcp_replace_ts_recent() from tcp_ack() Greg Kroah-Hartman
2013-04-29 19:02 ` [ 37/42] net: rate-limit warn-bad-offload splats Greg Kroah-Hartman
2013-04-29 19:02 ` [ 38/42] net: fix incorrect credentials passing Greg Kroah-Hartman
2013-04-29 19:02 ` [ 39/42] net: drop dst before queueing fragments Greg Kroah-Hartman
2013-04-29 19:02 ` [ 40/42] tracing: Fix selftest function recursion accounting Greg Kroah-Hartman
2013-04-29 19:02 ` [ 41/42] ARM: 7699/1: sched_clock: Add more notrace to prevent recursion Greg Kroah-Hartman
2013-04-29 19:02 ` [ 42/42] ARM: 7692/1: iop3xx: move IOP3XX_PERIPHERAL_VIRT_BASE Greg Kroah-Hartman
2013-04-30  1:54 ` [ 00/42] 3.8.11-stable review Shuah Khan
2013-04-30  2:02   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130429184755.486113843@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=davem@davemloft.net \
    --cc=kaber@trash.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).