linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Darren Hart <dvhart@linux.intel.com>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	"H. Peter Anvin" <hpa@zytor.com>,
	peter.p.waskiewicz.jr@intel.com,
	andriy.shevchenko@linux.intel.com, danders@circuitco.com,
	vishal.l.verma@intel.com, dvhart@linux.intel.com
Cc: Matthew Garrett <matthew.garrett@nebula.com>,
	Grant Likely <grant.likely@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	platform-driver-x86@vger.kernel.org
Subject: [PATCH 5/8] minnowboard-gpio: Export MinnowBoard expansion GPIO
Date: Tue, 25 Jun 2013 18:53:25 -0700	[thread overview]
Message-ID: <c7bed09378e5edf88872e277b238ecc3f52634aa.1372211451.git.dvhart@linux.intel.com> (raw)
In-Reply-To: <cover.1372211451.git.dvhart@linux.intel.com>
In-Reply-To: <cover.1372211451.git.dvhart@linux.intel.com>

Request and export the user-configurable GPIO lines to sysfs. This provides a
label readable in /debugfs/gpio and a simple interface for experimenting with
GPIO on the MinnowBoard.

This is separate from the minnowboard driver to provide users with the
flexibility to write kernel drivers for their own devices using these GPIO
lines.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
---
 drivers/platform/x86/Kconfig            |  18 +++++
 drivers/platform/x86/Makefile           |   1 +
 drivers/platform/x86/minnowboard-gpio.c | 115 ++++++++++++++++++++++++++++++++
 3 files changed, 134 insertions(+)
 create mode 100644 drivers/platform/x86/minnowboard-gpio.c

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 154dbf6..c8755cb 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -35,6 +35,24 @@ config MINNOWBOARD
 
 	  If you have a MinnowBoard, say Y or M here.
 
+if MINNOWBOARD
+config MINNOWBOARD_GPIO
+	tristate "MinnowBoard Expansion GPIO"
+	depends on MINNOWBOARD
+	default n
+	---help---
+	  Export the EG20T (gpio-pch) lines on the expansion connector to sysfs
+	  for easy manipulation from userspace. These will be named
+	  "minnow_gpio_pch[0-7]". If LVDS is not in use, export the E6XX
+	  (gpio-sch) lines on the expansion connector to sysfs, these will be
+	  named "minnow_gpio_aux[0-4]".
+
+	  If you have a MinnowBoard, and want to experiment with the GPIO,
+	  say Y or M here.
+
+endif # MINNOWBOARD
+
+
 config ACER_WMI
 	tristate "Acer WMI Laptop Extras"
 	depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 45ede1c..4dac9f0 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -3,6 +3,7 @@
 # x86 Platform-Specific Drivers
 #
 obj-$(CONFIG_MINNOWBOARD)	+= minnowboard.o
+obj-$(CONFIG_MINNOWBOARD_GPIO)	+= minnowboard-gpio.o
 obj-$(CONFIG_ASUS_LAPTOP)	+= asus-laptop.o
 obj-$(CONFIG_ASUS_WMI)		+= asus-wmi.o
 obj-$(CONFIG_ASUS_NB_WMI)	+= asus-nb-wmi.o
diff --git a/drivers/platform/x86/minnowboard-gpio.c b/drivers/platform/x86/minnowboard-gpio.c
new file mode 100644
index 0000000..c33c438
--- /dev/null
+++ b/drivers/platform/x86/minnowboard-gpio.c
@@ -0,0 +1,115 @@
+/*
+ * MinnowBoard Linux platform driver
+ * Copyright (c) 2013, Intel Corporation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Author: Darren Hart <dvhart@linux.intel.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/minnowboard.h>
+#include "minnowboard-gpio.h"
+
+static struct gpio expansion_gpios[] = {
+	{ GPIO_PCH0, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_pch0" },
+	{ GPIO_PCH1, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_pch1" },
+	{ GPIO_PCH2, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_pch2" },
+	{ GPIO_PCH3, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_pch3" },
+	{ GPIO_PCH4, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_pch4" },
+	{ GPIO_PCH5, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_pch5" },
+	{ GPIO_PCH6, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_pch6" },
+	{ GPIO_PCH7, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_pch7" },
+};
+
+static struct gpio expansion_aux_gpios[] = {
+	{ GPIO_AUX0, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_aux0" },
+	{ GPIO_AUX1, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_aux1" },
+	{ GPIO_AUX2, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_aux2" },
+	{ GPIO_AUX3, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_aux3" },
+	{ GPIO_AUX4, GPIOF_DIR_IN | GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE,
+	  "minnow_gpio_aux4" },
+};
+
+static int __init minnow_gpio_module_init(void)
+{
+	int err;
+
+	err = -ENODEV;
+	if (!minnow_detect())
+		goto out;
+
+#ifdef MODULE
+#ifdef CONFIG_MINNOWBOARD_MODULE
+	if (request_module("minnowboard"))
+		goto out;
+#endif
+#endif
+
+	/* Auxillary Expansion GPIOs */
+	if (!minnow_lvds_detect()) {
+		pr_debug("LVDS_DETECT not asserted, configuring Aux GPIO lines\n");
+		err = gpio_request_array(expansion_aux_gpios,
+					 ARRAY_SIZE(expansion_aux_gpios));
+		if (err) {
+			pr_err("Failed to request expansion aux GPIO lines\n");
+			goto out;
+		}
+	} else {
+		pr_debug("LVDS_DETECT asserted, ignoring aux GPIO lines\n");
+	}
+
+	/* Expansion GPIOs */
+	err = gpio_request_array(expansion_gpios, ARRAY_SIZE(expansion_gpios));
+	if (err) {
+		pr_err("Failed to request expansion GPIO lines\n");
+		if (minnow_lvds_detect())
+			gpio_free_array(expansion_aux_gpios,
+					ARRAY_SIZE(expansion_aux_gpios));
+		goto out;
+	}
+
+ out:
+	return err;
+}
+
+static void __exit minnow_gpio_module_exit(void)
+{
+	if (minnow_lvds_detect())
+		gpio_free_array(expansion_aux_gpios,
+				ARRAY_SIZE(expansion_aux_gpios));
+	gpio_free_array(expansion_gpios, ARRAY_SIZE(expansion_gpios));
+}
+
+module_init(minnow_gpio_module_init);
+module_exit(minnow_gpio_module_exit);
+
+MODULE_LICENSE("GPL");
-- 
1.8.1.2


  parent reply	other threads:[~2013-06-26  1:54 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-26  1:53 [PATCH 0/8] MinnowBoard support Darren Hart
2013-06-26  1:53 ` [PATCH 1/8] pch_gbe: Use PCH_GBE_PHY_REGS_LEN instead of 32 Darren Hart
2013-06-26  1:53 ` [PATCH 2/8] pch_uart: Add uart_clk selection for the MinnowBoard Darren Hart
2013-06-26  2:31   ` Greg Kroah-Hartman
2013-06-26  3:16     ` Darren Hart
2013-06-26  3:39       ` Greg Kroah-Hartman
2013-06-26  3:58         ` Darren Hart
2013-06-26  4:16           ` Greg Kroah-Hartman
2013-06-26  6:43           ` Jiri Slaby
2013-06-26  7:19             ` Darren Hart
2013-06-26  7:25               ` Jiri Slaby
2013-06-26 16:23                 ` Darren Hart
2013-06-26  1:53 ` [PATCH 3/8] gpio-sch: Add sch_gpio_resume_set_enable() Darren Hart
2013-06-26 21:24   ` Darren Hart
2013-06-26  1:53 ` [PATCH 4/8] minnowboard: Add base platform driver for the MinnowBoard Darren Hart
2013-06-26  4:00   ` Olof Johansson
2013-06-26  4:43     ` Darren Hart
2013-06-26  4:52       ` Matthew Garrett
2013-06-26  5:32         ` Darren Hart
2013-06-26  5:36           ` Matthew Garrett
2013-06-26  7:17             ` Darren Hart
2013-06-27  9:14   ` Linus Walleij
2013-06-28  5:43     ` Darren Hart
2013-07-04 16:26       ` Mark Brown
2013-07-20 17:37         ` Linus Walleij
2013-07-21 23:41           ` Mark Brown
2013-10-30 14:18             ` Darren Hart
2013-10-30 21:36               ` Mark Brown
2013-07-22  0:09         ` Grant Likely
2013-07-22  3:27           ` Darren Hart
2013-06-26  1:53 ` Darren Hart [this message]
2013-06-26  7:55   ` [PATCH 5/8] minnowboard-gpio: Export MinnowBoard expansion GPIO Andy Shevchenko
2013-06-26 16:21     ` Darren Hart
2013-06-27  8:18       ` Andy Shevchenko
2013-06-28  4:27         ` Darren Hart
2013-06-26  1:53 ` [PATCH 6/8] minnowboard-keys: Bind MinnowBoard buttons to arrow keys Darren Hart
2013-06-26  8:46   ` Andy Shevchenko
2013-06-26 16:28     ` Darren Hart
2013-06-26 17:16       ` Greg Kroah-Hartman
2013-06-26 17:23         ` Darren Hart
2013-06-26 19:57           ` Linus Walleij
2013-06-26 21:23             ` Darren Hart
2013-06-26  1:53 ` [PATCH 7/8] pci: Add CircuitCo VENDOR ID and MinnowBoard DEVICE ID Darren Hart
2013-06-26 16:32   ` Bjorn Helgaas
2013-06-26 17:15     ` Darren Hart
2013-06-26 19:37       ` Bjorn Helgaas
2013-06-26 21:16         ` Darren Hart
2013-06-26 21:30           ` Bjorn Helgaas
2013-06-26 21:30         ` H. Peter Anvin
2013-06-26 21:46           ` Bjorn Helgaas
2013-06-26 21:49             ` H. Peter Anvin
2013-06-26  1:53 ` [PATCH 8/8] pch_gbe: Add MinnowBoard support Darren Hart
2013-06-26  2:35   ` Bjorn Helgaas
2013-06-26  3:11     ` Darren Hart
2013-06-26  3:25     ` H. Peter Anvin
2013-06-28  5:37   ` Darren Hart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c7bed09378e5edf88872e277b238ecc3f52634aa.1372211451.git.dvhart@linux.intel.com \
    --to=dvhart@linux.intel.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=danders@circuitco.com \
    --cc=grant.likely@linaro.org \
    --cc=hpa@zytor.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=matthew.garrett@nebula.com \
    --cc=peter.p.waskiewicz.jr@intel.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).