From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: ACPI Devel Maling List <linux-acpi@vger.kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
Linux PM list <linux-pm@vger.kernel.org>,
Jarkko Nikula <jarkko.nikula@linux.intel.com>
Subject: [PATCH 1/2] MAINTAINERS / Documentation: Update Rafael's e-mail address
Date: Wed, 09 Oct 2013 01:53:09 +0200 [thread overview]
Message-ID: <1494498.ZhmudYOZXW@vostro.rjw.lan> (raw)
In-Reply-To: <1551451.ka7cHHvmPr@vostro.rjw.lan>
[-- Attachment #1: Type: text/plain, Size: 11646 bytes --]
From: Rafael J. Wysocki <rjw@rjwysocki.net>
The e-mail address rjw@sisk.pl that I have been using for quite some
time is going to expire at one point, so replace it with a new one,
rjw@rjwysocki.net, everywhere in MAINTAINERS and Documentation/ABI.
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
---
Documentation/ABI/testing/sysfs-devices-power | 32 +++++++++++++-------------
Documentation/ABI/testing/sysfs-power | 22 ++++++++---------
MAINTAINERS | 12 ++++-----
3 files changed, 33 insertions(+), 33 deletions(-)
Index: linux-pm/Documentation/ABI/testing/sysfs-devices-power
===================================================================
--- linux-pm.orig/Documentation/ABI/testing/sysfs-devices-power
+++ linux-pm/Documentation/ABI/testing/sysfs-devices-power
@@ -1,6 +1,6 @@
What: /sys/devices/.../power/
Date: January 2009
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power directory contains attributes
allowing the user space to check and modify some power
@@ -8,7 +8,7 @@ Description:
What: /sys/devices/.../power/wakeup
Date: January 2009
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/wakeup attribute allows the user
space to check if the device is enabled to wake up the system
@@ -34,7 +34,7 @@ Description:
What: /sys/devices/.../power/control
Date: January 2009
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/control attribute allows the user
space to control the run-time power management of the device.
@@ -53,7 +53,7 @@ Description:
What: /sys/devices/.../power/async
Date: January 2009
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../async attribute allows the user space to
enable or diasble the device's suspend and resume callbacks to
@@ -79,7 +79,7 @@ Description:
What: /sys/devices/.../power/wakeup_count
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_count attribute contains the number
of signaled wakeup events associated with the device. This
@@ -88,7 +88,7 @@ Description:
What: /sys/devices/.../power/wakeup_active_count
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_active_count attribute contains the
number of times the processing of wakeup events associated with
@@ -98,7 +98,7 @@ Description:
What: /sys/devices/.../power/wakeup_abort_count
Date: February 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_abort_count attribute contains the
number of times the processing of a wakeup event associated with
@@ -109,7 +109,7 @@ Description:
What: /sys/devices/.../power/wakeup_expire_count
Date: February 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_expire_count attribute contains the
number of times a wakeup event associated with the device has
@@ -119,7 +119,7 @@ Description:
What: /sys/devices/.../power/wakeup_active
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_active attribute contains either 1,
or 0, depending on whether or not a wakeup event associated with
@@ -129,7 +129,7 @@ Description:
What: /sys/devices/.../power/wakeup_total_time_ms
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_total_time_ms attribute contains
the total time of processing wakeup events associated with the
@@ -139,7 +139,7 @@ Description:
What: /sys/devices/.../power/wakeup_max_time_ms
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_max_time_ms attribute contains
the maximum time of processing a single wakeup event associated
@@ -149,7 +149,7 @@ Description:
What: /sys/devices/.../power/wakeup_last_time_ms
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_last_time_ms attribute contains
the value of the monotonic clock corresponding to the time of
@@ -160,7 +160,7 @@ Description:
What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms
Date: February 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
contains the total time the device has been preventing
@@ -189,7 +189,7 @@ Description:
What: /sys/devices/.../power/pm_qos_latency_us
Date: March 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_resume_latency_us attribute
contains the PM QoS resume latency limit for the given device,
@@ -207,7 +207,7 @@ Description:
What: /sys/devices/.../power/pm_qos_no_power_off
Date: September 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_no_power_off attribute
is used for manipulating the PM QoS "no power off" flag. If
@@ -222,7 +222,7 @@ Description:
What: /sys/devices/.../power/pm_qos_remote_wakeup
Date: September 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_remote_wakeup attribute
is used for manipulating the PM QoS "remote wakeup required"
Index: linux-pm/MAINTAINERS
===================================================================
--- linux-pm.orig/MAINTAINERS
+++ linux-pm/MAINTAINERS
@@ -237,7 +237,7 @@ F: drivers/platform/x86/acer-wmi.c
ACPI
M: Len Brown <lenb@kernel.org>
-M: Rafael J. Wysocki <rjw@sisk.pl>
+M: Rafael J. Wysocki <rjw@rjwysocki.net>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
Q: http://patchwork.kernel.org/project/linux-acpi/list/
@@ -2294,7 +2294,7 @@ S: Maintained
F: drivers/net/ethernet/ti/cpmac.c
CPU FREQUENCY DRIVERS
-M: Rafael J. Wysocki <rjw@sisk.pl>
+M: Rafael J. Wysocki <rjw@rjwysocki.net>
M: Viresh Kumar <viresh.kumar@linaro.org>
L: cpufreq@vger.kernel.org
L: linux-pm@vger.kernel.org
@@ -2325,7 +2325,7 @@ S: Maintained
F: drivers/cpuidle/cpuidle-big_little.c
CPUIDLE DRIVERS
-M: Rafael J. Wysocki <rjw@sisk.pl>
+M: Rafael J. Wysocki <rjw@rjwysocki.net>
M: Daniel Lezcano <daniel.lezcano@linaro.org>
L: linux-pm@vger.kernel.org
S: Maintained
@@ -3547,7 +3547,7 @@ F: fs/freevxfs/
FREEZER
M: Pavel Machek <pavel@ucw.cz>
-M: "Rafael J. Wysocki" <rjw@sisk.pl>
+M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
L: linux-pm@vger.kernel.org
S: Supported
F: Documentation/power/freezing-of-tasks.txt
@@ -3883,7 +3883,7 @@ F: drivers/video/hgafb.c
HIBERNATION (aka Software Suspend, aka swsusp)
M: Pavel Machek <pavel@ucw.cz>
-M: "Rafael J. Wysocki" <rjw@sisk.pl>
+M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
L: linux-pm@vger.kernel.org
S: Supported
F: arch/x86/power/
@@ -8082,7 +8082,7 @@ F: drivers/sh/
SUSPEND TO RAM
M: Len Brown <len.brown@intel.com>
M: Pavel Machek <pavel@ucw.cz>
-M: "Rafael J. Wysocki" <rjw@sisk.pl>
+M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
L: linux-pm@vger.kernel.org
S: Supported
F: Documentation/power/
Index: linux-pm/Documentation/ABI/testing/sysfs-power
===================================================================
--- linux-pm.orig/Documentation/ABI/testing/sysfs-power
+++ linux-pm/Documentation/ABI/testing/sysfs-power
@@ -1,6 +1,6 @@
What: /sys/power/
Date: August 2006
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power directory will contain files that will
provide a unified interface to the power management
@@ -8,7 +8,7 @@ Description:
What: /sys/power/state
Date: August 2006
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/state file controls the system power state.
Reading from this file returns what states are supported,
@@ -22,7 +22,7 @@ Description:
What: /sys/power/disk
Date: September 2006
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/disk file controls the operating mode of the
suspend-to-disk mechanism. Reading from this file returns
@@ -67,7 +67,7 @@ Description:
What: /sys/power/image_size
Date: August 2006
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/image_size file controls the size of the image
created by the suspend-to-disk mechanism. It can be written a
@@ -84,7 +84,7 @@ Description:
What: /sys/power/pm_trace
Date: August 2006
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/pm_trace file controls the code which saves the
last PM event point in the RTC across reboots, so that you can
@@ -133,7 +133,7 @@ Description:
What: /sys/power/pm_async
Date: January 2009
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/pm_async file controls the switch allowing the
user space to enable or disable asynchronous suspend and resume
@@ -146,7 +146,7 @@ Description:
What: /sys/power/wakeup_count
Date: July 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wakeup_count file allows user space to put the
system into a sleep state while taking into account the
@@ -161,7 +161,7 @@ Description:
What: /sys/power/reserved_size
Date: May 2011
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/reserved_size file allows user space to control
the amount of memory reserved for allocations made by device
@@ -175,7 +175,7 @@ Description:
What: /sys/power/autosleep
Date: April 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/autosleep file can be written one of the strings
returned by reads from /sys/power/state. If that happens, a
@@ -192,7 +192,7 @@ Description:
What: /sys/power/wake_lock
Date: February 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wake_lock file allows user space to create
wakeup source objects and activate them on demand (if one of
@@ -219,7 +219,7 @@ Description:
What: /sys/power/wake_unlock
Date: February 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wake_unlock file allows user space to deactivate
wakeup sources created with the help of /sys/power/wake_lock.
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2013-10-08 23:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-08 23:51 [PATCH 0/2] Update my e-mail address and ACPI info in MAINTAINERS Rafael J. Wysocki
2013-10-08 23:53 ` Rafael J. Wysocki [this message]
2013-10-08 23:53 ` [PATCH 2/2] MAINTAINERS / ACPI: Update links and git tree information Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494498.ZhmudYOZXW@vostro.rjw.lan \
--to=rjw@rjwysocki.net \
--cc=jarkko.nikula@linux.intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).