linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Morton <akpm@zip.com.au>
To: Andrea Arcangeli <andrea@suse.de>, Alexander Viro <viro@math.psu.edu>
Cc: lkml <linux-kernel@vger.kernel.org>
Subject: [patch] truncate fixes
Date: Sat, 05 Jan 2002 03:08:25 -0800	[thread overview]
Message-ID: <3C36DEA9.AEA2A402@zip.com.au> (raw)

This is the backport of the -ac truncate fixes we discussed
the other day.  All code paths have been tested and work OK.

Please review.

--- linux-2.4.18-pre1/fs/buffer.c	Fri Dec 21 11:19:14 2001
+++ linux-akpm/fs/buffer.c	Sat Jan  5 01:26:38 2002
@@ -1512,6 +1512,7 @@ static int __block_write_full_page(struc
 	int err, i;
 	unsigned long block;
 	struct buffer_head *bh, *head;
+	int need_unlock;
 
 	if (!PageLocked(page))
 		BUG();
@@ -1567,8 +1568,34 @@ static int __block_write_full_page(struc
 	return 0;
 
 out:
+	/*
+	 * ENOSPC, or some other error.  We may already have added some
+	 * blocks to the file, so we need to write these out to avoid
+	 * exposing stale data.
+	 */
 	ClearPageUptodate(page);
-	UnlockPage(page);
+	bh = head;
+	need_unlock = 1;
+	/* Recovery: lock and submit the mapped buffers */
+	do {
+		if (buffer_mapped(bh)) {
+			lock_buffer(bh);
+			set_buffer_async_io(bh);
+			need_unlock = 0;
+		}
+		bh = bh->b_this_page;
+	} while (bh != head);
+	do {
+		struct buffer_head *next = bh->b_this_page;
+		if (buffer_mapped(bh)) {
+			set_bit(BH_Uptodate, &bh->b_state);
+			clear_bit(BH_Dirty, &bh->b_state);
+			submit_bh(WRITE, bh);
+		}
+		bh = next;
+	} while (bh != head);
+	if (need_unlock)
+		UnlockPage(page);
 	return err;
 }
 
@@ -1639,6 +1666,17 @@ static int __block_prepare_write(struct 
 	}
 	return 0;
 out:
+	bh = head;
+	block_start = 0;
+	do {
+		if (buffer_new(bh) && !buffer_uptodate(bh)) {
+			memset(kaddr+block_start, 0, bh->b_size);
+			set_bit(BH_Uptodate, &bh->b_state);
+			mark_buffer_dirty(bh);
+		}
+		block_start += bh->b_size;
+		bh = bh->b_this_page;
+	} while (bh != head);
 	return err;
 }
 
--- linux-2.4.18-pre1/mm/filemap.c	Wed Dec 26 11:47:41 2001
+++ linux-akpm/mm/filemap.c	Sat Jan  5 01:26:50 2002
@@ -3004,7 +3004,7 @@ generic_file_write(struct file *file,con
 		kaddr = kmap(page);
 		status = mapping->a_ops->prepare_write(file, page, offset, offset+bytes);
 		if (status)
-			goto unlock;
+			goto sync_failure;
 		page_fault = __copy_from_user(kaddr+offset, buf, bytes);
 		flush_dcache_page(page);
 		status = mapping->a_ops->commit_write(file, page, offset, offset+bytes);
@@ -3029,6 +3029,7 @@ unlock:
 		if (status < 0)
 			break;
 	} while (count);
+done:
 	*ppos = pos;
 
 	if (cached_page)
@@ -3050,6 +3051,18 @@ out:
 fail_write:
 	status = -EFAULT;
 	goto unlock;
+
+sync_failure:
+	/*
+	 * If blocksize < pagesize, prepare_write() may have instantiated a
+	 * few blocks outside i_size.  Trim these off again.
+	 */
+	kunmap(page);
+	UnlockPage(page);
+	page_cache_release(page);
+	if (pos + bytes > inode->i_size)
+		vmtruncate(inode, inode->i_size);
+	goto done;
 
 o_direct:
 	written = generic_file_direct_IO(WRITE, file, (char *) buf, count, pos);

             reply	other threads:[~2002-01-05 11:13 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-01-05 11:08 Andrew Morton [this message]
2002-01-07  2:46 ` [patch] truncate fixes Andrea Arcangeli
2002-01-07  2:53   ` Andrew Morton
2002-01-07  3:16     ` Andrea Arcangeli
2002-01-07  5:24     ` Alexander Viro
2002-01-07  3:11   ` Andrew Morton
2002-01-07  3:58     ` Andrea Arcangeli
2002-01-07  3:32 ` Andrea Arcangeli
2002-01-07  3:48   ` Andrew Morton
2002-01-07  4:12     ` Andrea Arcangeli
2002-01-07  4:28       ` Andrew Morton
2002-01-07  5:09         ` Andrea Arcangeli
2002-01-07 12:41         ` Daniel Phillips

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3C36DEA9.AEA2A402@zip.com.au \
    --to=akpm@zip.com.au \
    --cc=andrea@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=viro@math.psu.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).