linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Boris BREZILLON <b.brezillon@overkiz.com>
To: Rob Landley <rob@landley.net>,
	Rob Herring <rob.herring@calxeda.com>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Mike Turquette <mturquette@linaro.org>,
	Russell King <linux@arm.linux.org.uk>,
	Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Boris BREZILLON <b.brezillon@overkiz.com>,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] clk: add accuracy support for fixed clock
Date: Wed, 27 Nov 2013 13:44:45 +0100	[thread overview]
Message-ID: <1385556285-19180-3-git-send-email-b.brezillon@overkiz.com> (raw)
In-Reply-To: <1385556285-19180-1-git-send-email-b.brezillon@overkiz.com>

This patch adds support for accuracy retrieval on fixed clocks.
It also adds a new dt property called 'clock-accuracy' to define the clock
accuracy.

This can be usefull for oscillator (RC, crystal, ...) definitions which are
always given an accuracy characteristic.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
 .../devicetree/bindings/clock/fixed-clock.txt      |    3 ++
 drivers/clk/clk-fixed-rate.c                       |   43 +++++++++++++++++---
 include/linux/clk-provider.h                       |    4 ++
 3 files changed, 44 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt
index 0b1fe78..48ea0ad 100644
--- a/Documentation/devicetree/bindings/clock/fixed-clock.txt
+++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt
@@ -10,6 +10,8 @@ Required properties:
 - clock-frequency : frequency of clock in Hz. Should be a single cell.
 
 Optional properties:
+- clock-accuracy : accuracy of clock in ppb (parts per billion).
+		   Should be a single cell.
 - gpios : From common gpio binding; gpio connection to clock enable pin.
 - clock-output-names : From common clock binding.
 
@@ -18,4 +20,5 @@ Example:
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000000>;
+		clock-accuracy = <100>;
 	};
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index 1ed591a..0fc56ab 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -34,22 +34,31 @@ static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw,
 	return to_clk_fixed_rate(hw)->fixed_rate;
 }
 
+static unsigned long clk_fixed_rate_recalc_accuracy(struct clk_hw *hw,
+		unsigned long parent_accuracy)
+{
+	return to_clk_fixed_rate(hw)->fixed_accuracy;
+}
+
 const struct clk_ops clk_fixed_rate_ops = {
 	.recalc_rate = clk_fixed_rate_recalc_rate,
+	.recalc_accuracy = clk_fixed_rate_recalc_accuracy,
 };
 EXPORT_SYMBOL_GPL(clk_fixed_rate_ops);
 
 /**
- * clk_register_fixed_rate - register fixed-rate clock with the clock framework
+ * clk_register_fixed_rate_with_accuracy - register fixed-rate clock with the
+ *					   clock framework
  * @dev: device that is registering this clock
  * @name: name of this clock
  * @parent_name: name of clock's parent
  * @flags: framework-specific flags
  * @fixed_rate: non-adjustable clock rate
+ * @fixed_accuracy: non-adjustable clock rate
  */
-struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
-		const char *parent_name, unsigned long flags,
-		unsigned long fixed_rate)
+struct clk *clk_register_fixed_rate_with_accuracy(struct device *dev,
+		const char *name, const char *parent_name, unsigned long flags,
+		unsigned long fixed_rate, unsigned long fixed_accuracy)
 {
 	struct clk_fixed_rate *fixed;
 	struct clk *clk;
@@ -70,16 +79,33 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 
 	/* struct clk_fixed_rate assignments */
 	fixed->fixed_rate = fixed_rate;
+	fixed->fixed_accuracy = fixed_accuracy;
 	fixed->hw.init = &init;
 
 	/* register the clock */
 	clk = clk_register(dev, &fixed->hw);
-
 	if (IS_ERR(clk))
 		kfree(fixed);
 
 	return clk;
 }
+EXPORT_SYMBOL_GPL(clk_register_fixed_rate_with_accuracy);
+
+/**
+ * clk_register_fixed_rate - register fixed-rate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @fixed_rate: non-adjustable clock rate
+ */
+struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		unsigned long fixed_rate)
+{
+	return clk_register_fixed_rate_with_accuracy(dev, name, parent_name,
+						     flags, fixed_rate, 0);
+}
 EXPORT_SYMBOL_GPL(clk_register_fixed_rate);
 
 #ifdef CONFIG_OF
@@ -91,13 +117,18 @@ void of_fixed_clk_setup(struct device_node *node)
 	struct clk *clk;
 	const char *clk_name = node->name;
 	u32 rate;
+	u32 accuracy = 0;
 
 	if (of_property_read_u32(node, "clock-frequency", &rate))
 		return;
 
+	of_property_read_u32(node, "clock-accuracy", &accuracy);
+
 	of_property_read_string(node, "clock-output-names", &clk_name);
 
-	clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate);
+	clk = clk_register_fixed_rate_with_accuracy(NULL, clk_name, NULL,
+						    CLK_IS_ROOT, rate,
+						    accuracy);
 	if (!IS_ERR(clk))
 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
 }
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 16d182c..5429f5d 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -204,6 +204,7 @@ struct clk_hw {
 struct clk_fixed_rate {
 	struct		clk_hw hw;
 	unsigned long	fixed_rate;
+	unsigned long	fixed_accuracy;
 	u8		flags;
 };
 
@@ -211,6 +212,9 @@ extern const struct clk_ops clk_fixed_rate_ops;
 struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		unsigned long fixed_rate);
+struct clk *clk_register_fixed_rate_with_accuracy(struct device *dev,
+		const char *name, const char *parent_name, unsigned long flags,
+		unsigned long fixed_rate, unsigned long fixed_accuracy);
 
 void of_fixed_clk_setup(struct device_node *np);
 
-- 
1.7.9.5


  parent reply	other threads:[~2013-11-27 12:47 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-27 12:44 [PATCH v2 0/2] clk: add clk accuracy support Boris BREZILLON
2013-11-27 12:44 ` [PATCH v2 1/2] clk: add clk accuracy retrieval support Boris BREZILLON
2013-12-02  7:50   ` Uwe Kleine-König
2013-12-02 12:17     ` boris brezillon
2013-11-27 12:44 ` Boris BREZILLON [this message]
2013-11-27 14:56   ` [PATCH v2 2/2] clk: add accuracy support for fixed clock Jason Cooper
2013-11-27 17:19     ` boris brezillon
2013-11-27 18:10       ` Mike Turquette
2013-11-28  8:02         ` boris brezillon
2013-12-02  3:15           ` Jason Cooper
2013-12-04 19:14             ` Mike Turquette
2013-12-02  3:02       ` Jason Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1385556285-19180-3-git-send-email-b.brezillon@overkiz.com \
    --to=b.brezillon@overkiz.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@linaro.org \
    --cc=nicolas.ferre@atmel.com \
    --cc=pawel.moll@arm.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).