Remove include/asm-arm/hardware/linkup-l1110.h
diff mbox series

Message ID 20050914204339.GM19491@mipter.zuzino.mipt.ru
State New, archived
Headers show
Series
  • Remove include/asm-arm/hardware/linkup-l1110.h
Related show

Commit Message

Alexey Dobriyan Sept. 14, 2005, 8:43 p.m. UTC
From: Domen Puncer <domen@coderock.org>

Remove nowhere referenced file (grep "linkup-l1110" didn't find
anything).

Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---

 include/asm-arm/hardware/linkup-l1110.h |   48 --------------------------------
 1 files changed, 48 deletions(-)


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Patch
diff mbox series

--- a/include/asm-arm/hardware/linkup-l1110.h	2005-09-15 00:36:56.000000000 +0400
+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
@@ -1,48 +0,0 @@ 
-/*
-*
-* Definitions for H3600 Handheld Computer
-*
-* Copyright 2001 Compaq Computer Corporation.
-*
-* Use consistent with the GNU GPL is permitted,
-* provided that this copyright notice is
-* preserved in its entirety in all copies and derived works.
-*
-* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-* FITNESS FOR ANY PARTICULAR PURPOSE.
-*
-* Author: Jamey Hicks.
-*
-*/
-
-/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
-
-/* PC Card Status Register */
-#define LINKUP_PRS_S1	(1 << 0) /* voltage control bits S1-S4 */
-#define LINKUP_PRS_S2	(1 << 1)
-#define LINKUP_PRS_S3	(1 << 2)
-#define LINKUP_PRS_S4	(1 << 3)
-#define LINKUP_PRS_BVD1	(1 << 4)
-#define LINKUP_PRS_BVD2	(1 << 5)
-#define LINKUP_PRS_VS1	(1 << 6)
-#define LINKUP_PRS_VS2	(1 << 7)
-#define LINKUP_PRS_RDY	(1 << 8)
-#define LINKUP_PRS_CD1	(1 << 9)
-#define LINKUP_PRS_CD2	(1 << 10)
-
-/* PC Card Command Register */
-#define LINKUP_PRC_S1	(1 << 0)
-#define LINKUP_PRC_S2	(1 << 1)
-#define LINKUP_PRC_S3	(1 << 2)
-#define LINKUP_PRC_S4	(1 << 3)
-#define LINKUP_PRC_RESET (1 << 4)
-#define LINKUP_PRC_APOE	(1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
-#define LINKUP_PRC_CFE	(1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
-#define LINKUP_PRC_SOE	(1 << 7) /* signal output driver enable */
-#define LINKUP_PRC_SSP	(1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
-#define LINKUP_PRC_MBZ	(1 << 15) /* must be zero */
-
-struct linkup_l1110 {
-	volatile short prc;
-};