[3.12,67/82] ACPI / hotplug / PCI: Relax the checking of _STA return values
diff mbox series

Message ID 20140220235021.487910930@linuxfoundation.org
State New, archived
Headers show
  • 3.12.13-stable review
Related show

Commit Message

Greg KH Feb. 20, 2014, 11:52 p.m. UTC
3.12-stable review patch.  If anyone has any objections, please let me know.


From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit 7282059489868e0ed1b0d79765730c6b233a8399 upstream.

The ACPI specification (ACPI 5.0A, Section 6.3.7) says:

 _STA may return bit 0 clear (not present) with bit 3 set (device is
 functional). This case is used to indicate a valid device for which
 no device driver should be loaded (for example, a bridge device.)
 Children of this device may be present and valid. OSPM should
 continue enumeration below a device whose _STA returns this bit

Evidently, some BIOSes follow that and return 0x0A from _STA, which
causes problems to happen when they trigger bus check or device check
notifications for those devices too.  Namely, ACPIPHP thinks that they
are gone and may drop them, for example, if such a notification is
triggered during a resume from system suspend.

To fix that, modify ACPICA to regard devies as present and
functioning if _STA returns both the ACPI_STA_DEVICE_ENABLED
and ACPI_STA_DEVICE_FUNCTIONING bits set for them.

Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com>
[rjw: Subject and changelog, minor code modifications]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

 drivers/pci/hotplug/acpiphp_glue.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

diff mbox series

--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -706,6 +706,17 @@  static unsigned int get_slot_status(stru
 	return (unsigned int)sta;
+static inline bool device_status_valid(unsigned int sta)
+	/*
+	 * ACPI spec says that _STA may return bit 0 clear with bit 3 set
+	 * if the device is valid but does not require a device driver to be
+	 * loaded (Section 6.3.7 of ACPI 5.0A).
+	 */
+	return (sta & mask) == mask;
  * trim_stale_devices - remove PCI devices that are not responding.
  * @dev: PCI device to start walking the hierarchy from.
@@ -721,7 +732,7 @@  static void trim_stale_devices(struct pc
 		unsigned long long sta;
 		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
-		alive = (ACPI_SUCCESS(status) && sta == ACPI_STA_ALL)
+		alive = (ACPI_SUCCESS(status) && device_status_valid(sta))
 			|| acpiphp_no_hotplug(handle);
 	if (!alive) {
@@ -764,7 +775,7 @@  static void acpiphp_check_bridge(struct
 		if (slot_no_hotplug(slot)) {
 			; /* do nothing */
-		} else if (get_slot_status(slot) == ACPI_STA_ALL) {
+		} else if (device_status_valid(get_slot_status(slot))) {
 			/* remove stale devices if any */
 			list_for_each_entry_safe(dev, tmp, &bus->devices,