From: Sebastian Reichel <sre@kernel.org>
To: Sebastian Reichel <sre@ring0.de>,
Linus Walleij <linus.walleij@linaro.org>,
Shubhrajyoti Datta <omaplinuxkernel@gmail.com>,
Carlos Chinea <cch.devel@gmail.com>
Cc: "Tony Lindgren" <tony@atomide.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Pawel Moll" <pawel.moll@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Kumar Gala" <galak@codeaurora.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org, "Pali Rohár" <pali.rohar@gmail.com>,
"Ивайло Димитров" <freemangordon@abv.bg>,
"Joni Lapilainen" <joni.lapilainen@gmail.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Sebastian Reichel" <sre@kernel.org>
Subject: [PATCHv3 13/14] DTS: ARM: OMAP3-N900: Add SSI support
Date: Sat, 29 Mar 2014 01:31:49 +0100 [thread overview]
Message-ID: <1396053110-21639-14-git-send-email-sre@kernel.org> (raw)
In-Reply-To: <1396053110-21639-1-git-send-email-sre@kernel.org>
Add SSI device tree data for OMAP3 and Nokia N900.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
arch/arm/boot/dts/omap3-n900.dts | 24 ++++++++++++++++++
arch/arm/boot/dts/omap3.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap34xx.dtsi | 11 ++++++++
arch/arm/boot/dts/omap36xx.dtsi | 11 ++++++++
4 files changed, 101 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 0bf40c9..5bccd8c 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -145,6 +145,19 @@
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
>;
};
+
+ ssi_pins: pinmux_ssi {
+ pinctrl-single,pins = <
+ 0x150 (PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
+ 0x14e (PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
+ 0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ 0x14c (PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
+ 0x154 (PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
+ 0x156 (PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
+ 0x158 (PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
+ 0x15a (PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
+ >;
+ };
};
&i2c1 {
@@ -490,6 +503,17 @@
power = <50>;
};
+&ssi_port1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssi_pins>;
+
+ ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+};
+
+&ssi_port2 {
+ status = "disabled";
+};
+
&uart1 {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index a5fc83b..cb00ce6 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -669,6 +669,61 @@
num-eps = <16>;
ram-bits = <12>;
};
+
+ ssi: ssi-controller@48058000 {
+ compatible = "ti,omap3-ssi";
+ ti,hwmods = "ssi";
+
+ status = "disabled";
+
+ reg = <0x48058000 0x1000>,
+ <0x48059000 0x1000>;
+ reg-names = "sys",
+ "gdd";
+
+ interrupts = <71>;
+ interrupt-names = "gdd_mpu";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ssi_port1: ssi-port@0 {
+ compatible = "ti,omap3-ssi-port";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x4805a000 0x800>,
+ <0x4805a800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupt-parent = <&intc>;
+ interrupts = <67>,
+ <68>;
+ interrupt-names = "mpu_irq0",
+ "mpu_irq1";
+ };
+
+ ssi_port2: ssi-port@1 {
+ compatible = "ti,omap3-ssi-port";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x4805b000 0x800>,
+ <0x4805b800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupt-parent = <&intc>;
+ interrupts = <69>,
+ <70>;
+ interrupt-names = "mpu_irq0",
+ "mpu_irq1";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 2e92360..3819c1e 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -40,6 +40,17 @@
};
};
+&ssi {
+ status = "ok";
+
+ clocks = <&ssi_ssr_fck>,
+ <&ssi_sst_fck>,
+ <&ssi_ick>;
+ clock-names = "ssi_ssr_fck",
+ "ssi_sst_fck",
+ "ssi_ick";
+};
+
/include/ "omap34xx-omap36xx-clocks.dtsi"
/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 7e8dee9..a634961 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -52,6 +52,17 @@
};
};
+&ssi {
+ status = "ok";
+
+ clocks = <&ssi_ssr_fck>,
+ <&ssi_sst_fck>,
+ <&ssi_ick>;
+ clock-names = "ssi_ssr_fck",
+ "ssi_sst_fck",
+ "ssi_ick";
+};
+
/include/ "omap36xx-clocks.dtsi"
/include/ "omap34xx-omap36xx-clocks.dtsi"
/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
--
1.9.0
next prev parent reply other threads:[~2014-03-29 0:34 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-29 0:31 [PATCHv3 00/14] OMAP SSI driver / N900 modem support Sebastian Reichel
2014-03-29 0:31 ` [PATCHv3 01/14] Documentation: HSI: Add some general description for the HSI subsystem Sebastian Reichel
2014-04-19 19:05 ` Pavel Machek
2014-03-29 0:31 ` [PATCHv3 02/14] MAINTAINERS: update HSI entry Sebastian Reichel
2014-04-19 19:06 ` Pavel Machek
2014-03-29 0:31 ` [PATCHv3 03/14] HSI: hsi-char: fix driver for multiport scenarios Sebastian Reichel
2014-04-19 19:06 ` Pavel Machek
2014-03-29 0:31 ` [PATCHv3 04/14] HSI: method to unregister clients from an hsi port Sebastian Reichel
2014-04-19 19:07 ` Pavel Machek
2014-03-29 0:31 ` [PATCHv3 05/14] HSI: Add channel resource support to HSI clients Sebastian Reichel
2014-04-19 19:11 ` Pavel Machek
2014-04-25 17:32 ` Sebastian Reichel
2014-03-29 0:31 ` [PATCHv3 06/14] HSI: export method to (un)register clients Sebastian Reichel
2014-04-19 19:13 ` Pavel Machek
2014-03-29 0:31 ` [PATCHv3 07/14] HSI: Add common DT binding for HSI client devices Sebastian Reichel
2014-04-19 19:16 ` Pavel Machek
2014-04-25 18:25 ` Sebastian Reichel
2014-04-25 20:59 ` Sebastian Reichel
2014-04-27 10:57 ` Pavel Machek
2014-04-27 11:33 ` Sebastian Reichel
2014-04-21 16:52 ` Rob Herring
2014-04-25 18:32 ` Sebastian Reichel
2014-03-29 0:31 ` [PATCHv3 08/14] HSI: Introduce OMAP SSI driver Sebastian Reichel
2014-04-19 19:30 ` Pavel Machek
2014-04-25 18:36 ` Sebastian Reichel
2014-03-29 0:31 ` [PATCHv3 09/14] Documentation: DT: omap-ssi binding documentation Sebastian Reichel
2014-04-19 19:32 ` Pavel Machek
2014-04-21 16:43 ` Rob Herring
2014-04-25 18:38 ` Sebastian Reichel
2014-03-29 0:31 ` [PATCHv3 10/14] HSI: Introduce driver for SSI Protocol Sebastian Reichel
2014-04-19 19:49 ` Pavel Machek
2014-04-25 18:49 ` Sebastian Reichel
2014-03-29 0:31 ` [PATCHv3 11/14] HSI: Introduce Nokia N900 modem driver Sebastian Reichel
2014-04-19 20:25 ` Pavel Machek
2014-03-29 0:31 ` [PATCHv3 12/14] ARM: dts: omap3 clocks: simplify ssi aliases Sebastian Reichel
2014-04-19 20:26 ` Pavel Machek
2014-03-29 0:31 ` Sebastian Reichel [this message]
2014-04-19 20:28 ` [PATCHv3 13/14] DTS: ARM: OMAP3-N900: Add SSI support Pavel Machek
2014-03-29 0:31 ` [PATCHv3 14/14] DTS: ARM: OMAP3-N900: Add modem support Sebastian Reichel
2014-04-19 20:28 ` Pavel Machek
2014-05-05 19:31 ` [PATCHv3 00/14] OMAP SSI driver / N900 " Tony Lindgren
2014-05-05 22:41 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396053110-21639-14-git-send-email-sre@kernel.org \
--to=sre@kernel.org \
--cc=aaro.koskinen@iki.fi \
--cc=cch.devel@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=freemangordon@abv.bg \
--cc=galak@codeaurora.org \
--cc=joni.lapilainen@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=omaplinuxkernel@gmail.com \
--cc=pali.rohar@gmail.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sre@ring0.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).