linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Zhu, Lejun" <lejun.zhu@linux.intel.com>
To: lee.jones@linaro.org, sameo@linux.intel.com
Cc: linux-kernel@vger.kernel.org, jacob.jun.pan@linux.intel.com,
	bin.yang@intel.com, lejun.zhu@linux.intel.com
Subject: [PATCH RESEND v2 3/4] mfd: intel_soc_pmic: Crystal Cove support
Date: Fri, 23 May 2014 08:40:28 +0800	[thread overview]
Message-ID: <1400805629-10322-4-git-send-email-lejun.zhu@linux.intel.com> (raw)
In-Reply-To: <1400805629-10322-1-git-send-email-lejun.zhu@linux.intel.com>

Crystal Cove is the PMIC in Baytrail-T platform. This patch provides
chip-specific support for Crystal Cove.

v2:
- Add regmap_config for Crystal Cove.

Signed-off-by: Yang, Bin <bin.yang@intel.com>
Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com>
---
 drivers/mfd/intel_soc_pmic_crc.c | 165 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 165 insertions(+)
 create mode 100644 drivers/mfd/intel_soc_pmic_crc.c

diff --git a/drivers/mfd/intel_soc_pmic_crc.c b/drivers/mfd/intel_soc_pmic_crc.c
new file mode 100644
index 0000000..6ab4cbf
--- /dev/null
+++ b/drivers/mfd/intel_soc_pmic_crc.c
@@ -0,0 +1,165 @@
+/*
+ * intel_soc_pmic_crc.c - Device access for Crystal Cove PMIC
+ *
+ * Copyright (C) 2013, 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <bin.yang@intel.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/acpi.h>
+#include <linux/version.h>
+#include <linux/regmap.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include "intel_soc_pmic_core.h"
+
+#define CRYSTAL_COVE_IRQ_NUM		7
+#define CRYSTAL_COVE_MAX_REGISTER	0xBD
+
+#define CHIPID		0x00
+#define CHIPVER		0x01
+#define IRQLVL1		0x02
+#define MIRQLVL1	0x0E
+enum {
+	PWRSRC_IRQ = 0,
+	THRM_IRQ,
+	BCU_IRQ,
+	ADC_IRQ,
+	CHGR_IRQ,
+	GPIO_IRQ,
+	VHDMIOCP_IRQ
+};
+
+static struct resource gpio_resources[] = {
+	{
+		.name	= "GPIO",
+		.start	= GPIO_IRQ,
+		.end	= GPIO_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource pwrsrc_resources[] = {
+	{
+		.name  = "PWRSRC",
+		.start = PWRSRC_IRQ,
+		.end   = PWRSRC_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource adc_resources[] = {
+	{
+		.name  = "ADC",
+		.start = ADC_IRQ,
+		.end   = ADC_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource thermal_resources[] = {
+	{
+		.name  = "THERMAL",
+		.start = THRM_IRQ,
+		.end   = THRM_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+static struct resource bcu_resources[] = {
+	{
+		.name  = "BCU",
+		.start = BCU_IRQ,
+		.end   = BCU_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+static struct mfd_cell crystal_cove_dev[] = {
+	{
+		.name = "crystal_cove_pwrsrc",
+		.id = 0,
+		.num_resources = ARRAY_SIZE(pwrsrc_resources),
+		.resources = pwrsrc_resources,
+	},
+	{
+		.name = "crystal_cove_adc",
+		.id = 0,
+		.num_resources = ARRAY_SIZE(adc_resources),
+		.resources = adc_resources,
+	},
+	{
+		.name = "crystal_cove_thermal",
+		.id = 0,
+		.num_resources = ARRAY_SIZE(thermal_resources),
+		.resources = thermal_resources,
+	},
+	{
+		.name = "crystal_cove_bcu",
+		.id = 0,
+		.num_resources = ARRAY_SIZE(bcu_resources),
+		.resources = bcu_resources,
+	},
+	{
+		.name = "crystal_cove_gpio",
+		.id = 0,
+		.num_resources = ARRAY_SIZE(gpio_resources),
+		.resources = gpio_resources,
+	},
+	{NULL, },
+};
+
+#define	CRC_IRQREGMAP_VALUE(irq)	{	\
+		{MIRQLVL1, irq, 1, 0},		\
+		{IRQLVL1,  irq, 1, 0},		\
+		INTEL_PMIC_REG_NULL,		\
+	}
+
+static struct intel_pmic_irqregmap crystal_cove_irqregmap[] = {
+	[PWRSRC_IRQ]	= CRC_IRQREGMAP_VALUE(PWRSRC_IRQ),
+	[THRM_IRQ]	= CRC_IRQREGMAP_VALUE(THRM_IRQ),
+	[BCU_IRQ]	= CRC_IRQREGMAP_VALUE(BCU_IRQ),
+	[ADC_IRQ]	= CRC_IRQREGMAP_VALUE(ADC_IRQ),
+	[CHGR_IRQ]	= CRC_IRQREGMAP_VALUE(CHGR_IRQ),
+	[GPIO_IRQ]	= CRC_IRQREGMAP_VALUE(GPIO_IRQ),
+	[VHDMIOCP_IRQ]	= CRC_IRQREGMAP_VALUE(VHDMIOCP_IRQ),
+};
+
+static struct regmap_config crystal_cove_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = CRYSTAL_COVE_MAX_REGISTER,
+	.cache_type = REGCACHE_NONE,
+};
+
+static int crystal_cove_init(void)
+{
+	pr_debug("Crystal Cove: ID 0x%02X, VERSION 0x%02X\n",
+		 intel_soc_pmic_readb(CHIPID), intel_soc_pmic_readb(CHIPVER));
+	return 0;
+}
+
+struct intel_soc_pmic crystal_cove_pmic = {
+	.label		= "crystal cove",
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+	.init		= crystal_cove_init,
+	.cell_dev	= crystal_cove_dev,
+	.irq_regmap	= crystal_cove_irqregmap,
+	.irq_num	= CRYSTAL_COVE_IRQ_NUM,
+	.regmap_cfg	= &crystal_cove_regmap_config,
+};
-- 
1.8.3.2


  parent reply	other threads:[~2014-05-23  0:40 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-23  0:40 [PATCH RESEND v2 0/4] mfd: Intel SoC Power Management IC Zhu, Lejun
2014-05-23  0:40 ` [PATCH RESEND v2 1/4] mfd: intel_soc_pmic: Core driver Zhu, Lejun
2014-05-23 17:49   ` Mark Brown
2014-05-26  6:01     ` Zhu, Lejun
2014-05-26 14:51       ` Mark Brown
2014-05-27  0:48         ` Zhu, Lejun
2014-05-27 11:20           ` Mark Brown
2014-05-28  0:55             ` Zhu, Lejun
2014-05-28 11:19               ` Mark Brown
2014-05-23  0:40 ` [PATCH RESEND v2 2/4] mfd: intel_soc_pmic: I2C interface Zhu, Lejun
2014-05-23 17:53   ` Mark Brown
2014-05-26  6:03     ` Zhu, Lejun
2014-05-23  0:40 ` Zhu, Lejun [this message]
2014-05-23  0:40 ` [PATCH RESEND v2 4/4] mfd: intel_soc_pmic: Build files Zhu, Lejun
2014-05-23 10:08 ` [PATCH RESEND v2 0/4] mfd: Intel SoC Power Management IC Lee Jones
2014-05-25 23:41   ` Zhu, Lejun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1400805629-10322-4-git-send-email-lejun.zhu@linux.intel.com \
    --to=lejun.zhu@linux.intel.com \
    --cc=bin.yang@intel.com \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).