linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>,
	linux-kernel@vger.kernel.org,
	Linux PM list <linux-pm@vger.kernel.org>,
	Dmitry Torokhov <dtor@google.com>
Subject: [Update][PATCH 3/5] irq / PM: Make wakeup interrupts wake up from suspend-to-idle
Date: Fri, 08 Aug 2014 03:58:02 +0200	[thread overview]
Message-ID: <1925225.kgb6kA80iC@vostro.rjw.lan> (raw)
In-Reply-To: <1811897.nanFq2OCTN@vostro.rjw.lan>

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Make IRQs enabled for system wakeup via enable_irq_wake() wake up
the system from suspend-to-idle.

For this purpose, introduce a new routine for enabling and disabling
wakeup interrupts, set_wakeup_irqs(), and make freeze_enter() call it
to enable them before starting the suspend-to-idle loop and to
disable them after that loop has been terminated.

When enabling an IRQ which is not a shared one, that routine
replaces its original handler with a stub one always returning
IRQ_NONE.  When disabling it, set_wakeup_irqs() restores the
original handler for it.  This way, IRQ_NONE is returned for all
of the wakeup interrupts during suspend-to-idle and that triggers
the abort-suspend-or-wakeup condition in note_interrupt() causing
the system to wake up.

To avoid losing wakeup events, make note_interrupt() mark wakeup
interrupts as pending before triggering wakeup for irqs_suspended
set.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

When I was working on the doc (that I'm going to send shortly), it
occured to me that it actually would be better to always return
IRQ_NONE from interrupt handlers for wakeup interrupts when
irqs_suspended is set - and mark them as pending to avoid losing
wakeup events.  That way they'll work uniformly, even if someone is
insane enough to use enable_irq_wake() on an IRQF_NO_SUSPEND IRQ.

Rafael

---
 include/linux/interrupt.h |    1 +
 kernel/irq/pm.c           |   45 +++++++++++++++++++++++++++++++++++++++++++++
 kernel/irq/spurious.c     |    6 +++++-
 kernel/power/suspend.c    |    3 +++
 4 files changed, 54 insertions(+), 1 deletion(-)

Index: linux-pm/include/linux/interrupt.h
===================================================================
--- linux-pm.orig/include/linux/interrupt.h
+++ linux-pm/include/linux/interrupt.h
@@ -197,6 +197,7 @@ extern void irq_wake_thread(unsigned int
 /* The following three functions are for the core kernel use only. */
 extern void suspend_device_irqs(void);
 extern void resume_device_irqs(void);
+extern void set_wakeup_irqs(bool enable);
 #ifdef CONFIG_PM_SLEEP
 extern int check_wakeup_irqs(void);
 #else
Index: linux-pm/kernel/irq/pm.c
===================================================================
--- linux-pm.orig/kernel/irq/pm.c
+++ linux-pm/kernel/irq/pm.c
@@ -130,3 +130,48 @@ int check_wakeup_irqs(void)
 
 	return 0;
 }
+
+static irqreturn_t irq_pm_empty_handler(int irq, void *dev_id)
+{
+	return IRQ_NONE;
+}
+
+void set_wakeup_irqs(bool enable)
+{
+	struct irq_desc *desc;
+	int irq;
+
+	for_each_irq_desc(irq, desc) {
+		struct irqaction *action = desc->action;
+		unsigned long flags;
+
+		raw_spin_lock_irqsave(&desc->lock, flags);
+
+		if (action && irqd_is_wakeup_set(&desc->irq_data) &&
+		    !desc->skip_suspend) {
+			if (enable) {
+				/*
+				 * Replace handlers for not shared interrupts.
+				 * Shared ones have wrapper handlers already.
+				 */
+				if (!action->next) {
+					action->s_handler = action->handler;
+					action->handler = irq_pm_empty_handler;
+				}
+				desc->istate &= ~IRQS_SUSPENDED;
+				__enable_irq(desc, irq, false);
+			} else {
+				if (!(desc->istate & IRQS_SUSPENDED)) {
+					__disable_irq(desc, irq, false);
+					desc->istate |= IRQS_SUSPENDED;
+				}
+				if (action->handler == irq_pm_empty_handler) {
+					action->handler = action->s_handler;
+					action->s_handler = NULL;
+				}
+			}
+		}
+
+		raw_spin_unlock_irqrestore(&desc->lock, flags);
+	}
+}
Index: linux-pm/kernel/power/suspend.c
===================================================================
--- linux-pm.orig/kernel/power/suspend.c
+++ linux-pm/kernel/power/suspend.c
@@ -12,6 +12,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/console.h>
 #include <linux/cpu.h>
 #include <linux/cpuidle.h>
@@ -55,7 +56,9 @@ static void freeze_enter(void)
 {
 	cpuidle_use_deepest_state(true);
 	cpuidle_resume();
+	set_wakeup_irqs(true);
 	wait_event(suspend_freeze_wait_head, suspend_freeze_wake);
+	set_wakeup_irqs(false);
 	cpuidle_pause();
 	cpuidle_use_deepest_state(false);
 }
Index: linux-pm/kernel/irq/spurious.c
===================================================================
--- linux-pm.orig/kernel/irq/spurious.c
+++ linux-pm/kernel/irq/spurious.c
@@ -277,7 +277,11 @@ void note_interrupt(unsigned int irq, st
 		    irqreturn_t action_ret)
 {
 	if (unlikely(irqs_suspended && action_ret == IRQ_NONE)) {
-		pr_err("IRQ %d: Unhandled while suspended\n", irq);
+		if (irqd_is_wakeup_set(&desc->irq_data))
+			desc->istate |= IRQS_PENDING;
+		else
+			pr_err("IRQ %d: Unhandled while suspended\n", irq);
+
 		desc->istate |= IRQS_SUSPENDED;
 		desc->depth++;
 		irq_disable(desc);


  reply	other threads:[~2014-08-08  1:39 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-24 21:26 [RFC][PATCH] irq: Rework IRQF_NO_SUSPENDED Peter Zijlstra
2014-07-24 22:02 ` Rafael J. Wysocki
2014-07-24 23:10 ` Rafael J. Wysocki
2014-07-25  5:58   ` Peter Zijlstra
2014-07-29 19:20     ` Brian Norris
2014-07-29 19:28       ` Peter Zijlstra
2014-07-29 20:41         ` Brian Norris
2014-07-25  9:27   ` Thomas Gleixner
2014-07-25 12:49     ` Rafael J. Wysocki
2014-07-25 13:55       ` Thomas Gleixner
2014-07-25  9:40 ` Thomas Gleixner
2014-07-25 12:40   ` Peter Zijlstra
2014-07-25 13:25     ` Peter Zijlstra
2014-07-25 17:03       ` Rafael J. Wysocki
2014-07-25 16:58         ` Peter Zijlstra
2014-07-25 21:00         ` Thomas Gleixner
2014-07-25 22:25           ` Rafael J. Wysocki
2014-07-25 23:07             ` Rafael J. Wysocki
2014-07-26 11:49             ` Rafael J. Wysocki
2014-07-26 11:53               ` Rafael J. Wysocki
2014-07-28  6:49               ` Peter Zijlstra
2014-07-28 12:33                 ` Thomas Gleixner
2014-07-28 13:04                   ` Peter Zijlstra
2014-07-28 21:53                   ` Rafael J. Wysocki
2014-07-28 23:01                     ` Rafael J. Wysocki
2014-07-29 12:46                       ` Thomas Gleixner
2014-07-29 13:33                         ` Rafael J. Wysocki
2014-07-30 21:46                           ` [PATCH 0/3] irq / PM: wakeup interrupt interface for drivers (was: Re: [RFC][PATCH] irq: Rework IRQF_NO_SUSPENDED) Rafael J. Wysocki
2014-07-30 21:51                             ` [PATCH 1/3] irq / PM: New driver interface for wakeup interrupts Rafael J. Wysocki
2014-07-30 22:56                               ` Thomas Gleixner
2014-07-31  0:12                                 ` Thomas Gleixner
2014-07-31  2:14                                   ` Rafael J. Wysocki
2014-07-31 10:44                                     ` Thomas Gleixner
2014-07-31 18:36                                       ` Rafael J. Wysocki
2014-07-31 20:12                                         ` Alan Stern
2014-07-31 21:04                                           ` Rafael J. Wysocki
2014-07-31 23:41                                             ` Thomas Gleixner
2014-08-01  0:51                                               ` Rafael J. Wysocki
2014-08-01 14:41                                               ` Alan Stern
2014-07-31 22:16                                         ` Thomas Gleixner
2014-08-01  0:08                                           ` Rafael J. Wysocki
2014-08-01  1:24                                             ` Rafael J. Wysocki
2014-08-01  9:40                                             ` [PATCH 1/3] irq / PM: New driver interface for wakeup interruptsn Thomas Gleixner
2014-08-01 13:45                                               ` Rafael J. Wysocki
2014-08-01 13:43                                                 ` Thomas Gleixner
2014-08-01 14:29                                                   ` Rafael J. Wysocki
2014-08-02  1:31                                                     ` Rafael J. Wysocki
2014-08-03 13:42                                                       ` Rafael J. Wysocki
2014-08-04  3:38                                                         ` Rafael J. Wysocki
2014-08-05 15:22                                                     ` [PATCH 0/5] irq / PM: Shared IRQs vs IRQF_NO_SUSPEND and suspend-to-idle wakeup Rafael J. Wysocki
2014-08-05 15:24                                                       ` [PATCH 1/5] PM / sleep: Mechanism for aborting system suspends unconditionally Rafael J. Wysocki
2014-08-05 23:29                                                         ` [Update][PATCH " Rafael J. Wysocki
2014-08-05 15:25                                                       ` [PATCH 2/5] irq / PM: Fix IRQF_NO_SUSPEND problem with shared interrupts Rafael J. Wysocki
2014-08-05 15:26                                                       ` [PATCH 3/5] irq / PM: Make wakeup interrupts wake up from suspend-to-idle Rafael J. Wysocki
2014-08-08  1:58                                                         ` Rafael J. Wysocki [this message]
2014-08-09  0:28                                                           ` [Update][PATCH " Rafael J. Wysocki
2014-08-05 15:27                                                       ` [PATCH 4/5] x86 / PM: Set IRQCHIP_SKIP_SET_WAKE for IOAPIC IRQ chip objects Rafael J. Wysocki
2014-08-05 15:28                                                       ` [PATCH 5/5] PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle Rafael J. Wysocki
2014-08-05 16:12                                                       ` [PATCH 0/5] irq / PM: Shared IRQs vs IRQF_NO_SUSPEND and suspend-to-idle wakeup Peter Zijlstra
2014-08-08  2:09                                                       ` Rafael J. Wysocki
2014-07-31 22:54                                         ` [PATCH 1/3] irq / PM: New driver interface for wakeup interrupts Thomas Gleixner
2014-07-30 21:51                             ` [PATCH 2/3] PCI / PM: Make PCIe PME interrupts wake up from "freeze" sleep state Rafael J. Wysocki
2014-07-30 21:52                             ` [PATCH 3/3] gpio-keys / PM: use enable/disable_device_irq_wake() Rafael J. Wysocki
2014-07-28 21:27                 ` [RFC][PATCH] irq: Rework IRQF_NO_SUSPENDED Rafael J. Wysocki
2014-07-27 15:53             ` Rafael J. Wysocki
2014-07-27 22:00               ` [PATCH, v2] Rafael J. Wysocki
2014-07-28 12:11                 ` Thomas Gleixner
2014-07-28 21:17                   ` [PATCH, v3] irq / PM: Fix IRQF_NO_SUSPEND problem with shared interrupts (was: Re: [PATCH, v2]) Rafael J. Wysocki
2014-07-29  7:28                     ` [PATCH, v4] irq / PM: Fix IRQF_NO_SUSPEND problem with shared interrupts Rafael J. Wysocki
2014-07-29 13:46                       ` [PATCH, v5] " Rafael J. Wysocki
2014-07-30  0:54                         ` [PATCH, v6] " Rafael J. Wysocki
2014-07-25 12:47   ` [RFC][PATCH] irq: Rework IRQF_NO_SUSPENDED Rafael J. Wysocki
2014-07-25 13:22     ` Peter Zijlstra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1925225.kgb6kA80iC@vostro.rjw.lan \
    --to=rjw@rjwysocki.net \
    --cc=dtor@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).