From: Sebastian Reichel <sre@kernel.org>
To: Hans Verkuil <hans.verkuil@cisco.com>, linux-media@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Sebastian Reichel <sre@kernel.org>
Subject: [RFCv2 2/8] [media] si4713: switch reset gpio to devm_gpiod API
Date: Tue, 21 Oct 2014 17:07:01 +0200 [thread overview]
Message-ID: <1413904027-16767-3-git-send-email-sre@kernel.org> (raw)
In-Reply-To: <1413904027-16767-1-git-send-email-sre@kernel.org>
This updates the driver to use the managed gpiod interface
instead of the unmanged old GPIO API. This is a preperation
for the introduction of device tree support.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
drivers/media/radio/si4713/si4713.c | 38 +++++++++++++++++--------------------
drivers/media/radio/si4713/si4713.h | 3 ++-
2 files changed, 19 insertions(+), 22 deletions(-)
diff --git a/drivers/media/radio/si4713/si4713.c b/drivers/media/radio/si4713/si4713.c
index b335093..e560a7e 100644
--- a/drivers/media/radio/si4713/si4713.c
+++ b/drivers/media/radio/si4713/si4713.c
@@ -383,9 +383,9 @@ static int si4713_powerup(struct si4713_device *sdev)
}
}
- if (gpio_is_valid(sdev->gpio_reset)) {
+ if (!IS_ERR(sdev->gpio_reset)) {
udelay(50);
- gpio_set_value(sdev->gpio_reset, 1);
+ gpiod_set_value(sdev->gpio_reset, 1);
}
if (client->irq)
@@ -407,8 +407,8 @@ static int si4713_powerup(struct si4713_device *sdev)
SI4713_STC_INT | SI4713_CTS);
return err;
}
- if (gpio_is_valid(sdev->gpio_reset))
- gpio_set_value(sdev->gpio_reset, 0);
+ if (!IS_ERR(sdev->gpio_reset))
+ gpiod_set_value(sdev->gpio_reset, 0);
if (sdev->vdd) {
@@ -447,8 +447,8 @@ static int si4713_powerdown(struct si4713_device *sdev)
v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
resp[0]);
v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
- if (gpio_is_valid(sdev->gpio_reset))
- gpio_set_value(sdev->gpio_reset, 0);
+ if (!IS_ERR(sdev->gpio_reset))
+ gpiod_set_value(sdev->gpio_reset, 0);
if (sdev->vdd) {
err = regulator_disable(sdev->vdd);
@@ -1457,16 +1457,17 @@ static int si4713_probe(struct i2c_client *client,
goto exit;
}
- sdev->gpio_reset = -1;
- if (pdata && gpio_is_valid(pdata->gpio_reset)) {
- rval = gpio_request(pdata->gpio_reset, "si4713 reset");
- if (rval) {
- dev_err(&client->dev,
- "Failed to request gpio: %d\n", rval);
- goto free_sdev;
- }
- sdev->gpio_reset = pdata->gpio_reset;
- gpio_direction_output(sdev->gpio_reset, 0);
+ sdev->gpio_reset = devm_gpiod_get(&client->dev, "reset");
+ if (!IS_ERR(sdev->gpio_reset)) {
+ gpiod_direction_output(sdev->gpio_reset, 0);
+ } else if (PTR_ERR(sdev->gpio_reset) == -ENOENT) {
+ dev_dbg(&client->dev, "No reset GPIO assigned\n");
+ } else if (PTR_ERR(sdev->gpio_reset) == -ENOSYS) {
+ dev_dbg(&client->dev, "No reset GPIO support\n");
+ } else {
+ rval = PTR_ERR(sdev->gpio_reset);
+ dev_err(&client->dev, "Failed to request gpio: %d\n", rval);
+ goto free_sdev;
}
sdev->vdd = devm_regulator_get_optional(&client->dev, "vdd");
@@ -1614,9 +1615,6 @@ free_irq:
free_irq(client->irq, sdev);
free_ctrls:
v4l2_ctrl_handler_free(hdl);
-free_gpio:
- if (gpio_is_valid(sdev->gpio_reset))
- gpio_free(sdev->gpio_reset);
free_sdev:
kfree(sdev);
exit:
@@ -1637,8 +1635,6 @@ static int si4713_remove(struct i2c_client *client)
v4l2_device_unregister_subdev(sd);
v4l2_ctrl_handler_free(sd->ctrl_handler);
- if (gpio_is_valid(sdev->gpio_reset))
- gpio_free(sdev->gpio_reset);
kfree(sdev);
return 0;
diff --git a/drivers/media/radio/si4713/si4713.h b/drivers/media/radio/si4713/si4713.h
index ed28ed2..7c2479f 100644
--- a/drivers/media/radio/si4713/si4713.h
+++ b/drivers/media/radio/si4713/si4713.h
@@ -16,6 +16,7 @@
#define SI4713_I2C_H
#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-ctrls.h>
#include <media/si4713.h>
@@ -236,7 +237,7 @@ struct si4713_device {
struct completion work;
struct regulator *vdd;
struct regulator *vio;
- int gpio_reset;
+ struct gpio_desc *gpio_reset;
u32 power_state;
u32 rds_enabled;
u32 frequency;
--
2.1.1
next prev parent reply other threads:[~2014-10-21 15:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 15:06 [RFCv2 0/8] [media] si4713 DT binding Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 1/8] [media] si4713: switch to devm regulator API Sebastian Reichel
2014-11-11 11:07 ` Mauro Carvalho Chehab
2014-11-11 14:33 ` Sebastian Reichel
2014-11-11 17:59 ` Hans Verkuil
2014-11-11 22:12 ` Mauro Carvalho Chehab
2014-10-21 15:07 ` Sebastian Reichel [this message]
2014-10-21 15:07 ` [RFCv2 3/8] [media] si4713: use managed memory allocation Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 4/8] [media] si4713: use managed irq request Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 5/8] [media] si4713: add device tree support Sebastian Reichel
2014-11-04 21:47 ` Sakari Ailus
2014-11-10 20:58 ` Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 6/8] [media] si4713: add DT binding documentation Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 7/8] ARM: OMAP2: RX-51: update si4713 platform data Sebastian Reichel
2014-10-21 15:07 ` [RFCv2 8/8] [media] si4713: cleanup " Sebastian Reichel
2014-11-07 12:49 ` [RFCv2 0/8] [media] si4713 DT binding Hans Verkuil
2014-11-10 11:06 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413904027-16767-3-git-send-email-sre@kernel.org \
--to=sre@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=hans.verkuil@cisco.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).