From: Karol Wrona <k.wrona@samsung.com>
To: Jonathan Cameron <jic23@kernel.org>,
linux-iio@vger.kernel.org, Hartmut Knaack <knaack.h@gmx.de>,
linux-kernel@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Karol Wrona <wrona.vy@gmail.com>,
Karol Wrona <k.wrona@samsung.com>
Subject: [PATCH v3 0/5] iio: common: ssp_sensors: Add sensorhub driver
Date: Fri, 05 Dec 2014 20:54:45 +0100 [thread overview]
Message-ID: <1417809290-9662-1-git-send-email-k.wrona@samsung.com> (raw)
This patchset adds support for sensorhub. It is an external mcu which
manages and collects data from several sensors i.e. on Galaxy Gear 2 watch.
It contains:
- spi driver for sensorhub device
- DT binding for the device
- IIO common utils for ssp sensors (iio kfifo setup helpers, pre/post callbacks)
- IIO accelerometer driver
- IIO gyroscope driver
For now the driver supports "traditional" sensors but new ones types are
intended to be used.
>From v1:
- Adopted to new stm32fwu v5
- Fixed sensors' data process callbacks
- Fixed comments style
>From v2:
- Fixes after Hartmut Knaack review
- Sensorhub driver was moved from misc to iio after the discussion with Arnd
and Jonathan
- Firmware upgrade is not supported in this patchset. I hope it will be
applied when it will find its own place in the tree.
Karol Wrona (5):
iio: common: ssp_sensors: Add sensorhub driver
iio: sensorhub: Add sensorhub bindings
iio: common: ssp_sensors: Add sensorhub iio commons
iio: common: ssp_sensors: Add sensorhub accelerometer sensor
iio: common: ssp_sensors: Add sensorhub gyroscope sensor
.../devicetree/bindings/iio/sensorhub.txt | 46 ++
drivers/iio/accel/Makefile | 1 +
drivers/iio/accel/ssp_accel_sensor.c | 203 ++++++
drivers/iio/common/Kconfig | 1 +
drivers/iio/common/Makefile | 1 +
drivers/iio/common/ssp_sensors/Kconfig | 24 +
drivers/iio/common/ssp_sensors/Makefile | 6 +
drivers/iio/common/ssp_sensors/ssp.h | 254 +++++++
drivers/iio/common/ssp_sensors/ssp_dev.c | 693 ++++++++++++++++++++
drivers/iio/common/ssp_sensors/ssp_iio.c | 82 +++
drivers/iio/common/ssp_sensors/ssp_iio_sensor.h | 56 ++
drivers/iio/common/ssp_sensors/ssp_spi.c | 644 ++++++++++++++++++
drivers/iio/gyro/Makefile | 2 +
drivers/iio/gyro/ssp_gyro_sensor.c | 202 ++++++
include/linux/iio/common/ssp_sensors.h | 80 +++
15 files changed, 2295 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/sensorhub.txt
create mode 100644 drivers/iio/accel/ssp_accel_sensor.c
create mode 100644 drivers/iio/common/ssp_sensors/Kconfig
create mode 100644 drivers/iio/common/ssp_sensors/Makefile
create mode 100644 drivers/iio/common/ssp_sensors/ssp.h
create mode 100644 drivers/iio/common/ssp_sensors/ssp_dev.c
create mode 100644 drivers/iio/common/ssp_sensors/ssp_iio.c
create mode 100644 drivers/iio/common/ssp_sensors/ssp_iio_sensor.h
create mode 100644 drivers/iio/common/ssp_sensors/ssp_spi.c
create mode 100644 drivers/iio/gyro/ssp_gyro_sensor.c
create mode 100644 include/linux/iio/common/ssp_sensors.h
--
1.7.9.5
next reply other threads:[~2014-12-05 19:56 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-05 19:54 Karol Wrona [this message]
2014-12-05 19:54 ` [PATCH v3 1/5] iio: common: ssp_sensors: Add sensorhub driver Karol Wrona
2014-12-06 14:09 ` Jonathan Cameron
2014-12-16 10:17 ` Karol Wrona
2014-12-26 12:27 ` Jonathan Cameron
2014-12-17 22:11 ` Hartmut Knaack
2014-12-05 19:54 ` [PATCH v3 2/5] iio: sensorhub: Add sensorhub bindings Karol Wrona
2014-12-06 14:29 ` Jonathan Cameron
2014-12-16 7:30 ` Karol Wrona
2014-12-26 12:29 ` Jonathan Cameron
2014-12-05 19:54 ` [PATCH v3 3/5] iio: common: ssp_sensors: Add sensorhub iio commons Karol Wrona
2014-12-06 14:39 ` Jonathan Cameron
2015-01-13 16:03 ` Karol Wrona
2015-01-13 17:33 ` Jonathan Cameron
2014-12-17 22:15 ` Hartmut Knaack
2014-12-05 19:54 ` [PATCH v3 4/5] iio: common: ssp_sensors: Add sensorhub accelerometer sensor Karol Wrona
2014-12-06 14:52 ` Jonathan Cameron
2014-12-08 10:41 ` Karol Wrona
2014-12-26 12:34 ` Jonathan Cameron
2014-12-17 22:18 ` Hartmut Knaack
2014-12-05 19:54 ` [PATCH v3 5/5] iio: common: ssp_sensors: Add sensorhub gyroscope sensor Karol Wrona
2014-12-06 14:53 ` Jonathan Cameron
2014-12-17 22:20 ` Hartmut Knaack
2014-12-05 20:13 ` [PATCH v3 0/5] iio: common: ssp_sensors: Add sensorhub driver Karol Wrona
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417809290-9662-1-git-send-email-k.wrona@samsung.com \
--to=k.wrona@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=kyungmin.park@samsung.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wrona.vy@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).